Construindo confiança, garantindo o sucesso Portal do cliente dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success

Engenharia de proteção contra incêndio · artigo 7 de 10

Fire protection for steel warehouses

Do steel warehouses need fire protection? When codes and insurers require it, which members are usually protected and how to keep the cost under control in large logistics buildings.

Equipe de engenharia da World Steel · Atualizado em 2026-10-16 · 2 min de leitura

Steel warehouse

Often less than you think – but rarely none

Many single-storey warehouses with sprinklers and short escape distances need no fire rating on the main portal frame. But codes and insurers often require protection for columns at fire walls, mezzanines, office blocks, escape routes and structures supporting fire-rated walls or racking.

Typical protected elements

  • Columns and rafters at compartment walls, so the wall stays standing.
  • Mezzanine beams and columns.
  • Office and amenities blocks inside the warehouse.
  • Steel supporting fire-rated ceilings, shafts or plant rooms.

Keeping the cost down

  • Ask the fire engineer to define exactly which elements need a rating.
  • Use heavier sections where they reduce the section factor of protected members.
  • Apply the coating in the factory with the steel.
  • Use boards on columns that need long ratings, coatings on beams.

FAQ

Does a sprinklered warehouse need intumescent paint?

Sometimes not on the main frame, but specific elements may still need protection – the building code, the fire engineer and the insurer decide.

Precisa da espessura e do custo para o seu projeto?Envie a lista de peças e as classificações de resistência ao fogo – nossos engenheiros preparam uma proposta de proteção contra incêndio.
Solicitar proposta

Preliminary calculations are provided for estimation purposes only. Final coating thickness and fire protection system selection must be verified against the approved product documentation, applicable project requirements and relevant engineering assessments.

Próximo projeto

Planejando uma estrutura metálica no exterior?

Envie seus desenhos ou modelo IFC – nossa equipe de orçamentos responde com o escopo de fabricação, o cronograma e o preço entregue.