Costruire fiducia, garantire il successo Area clienti dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success

Ingegneria della protezione antincendio · articolo 7 di 10

Fire protection for steel warehouses

Do steel warehouses need fire protection? When codes and insurers require it, which members are usually protected and how to keep the cost under control in large logistics buildings.

Team tecnico World Steel · Aggiornato il 2026-10-16 · Lettura: 2 min

Steel warehouse

Often less than you think – but rarely none

Many single-storey warehouses with sprinklers and short escape distances need no fire rating on the main portal frame. But codes and insurers often require protection for columns at fire walls, mezzanines, office blocks, escape routes and structures supporting fire-rated walls or racking.

Typical protected elements

  • Columns and rafters at compartment walls, so the wall stays standing.
  • Mezzanine beams and columns.
  • Office and amenities blocks inside the warehouse.
  • Steel supporting fire-rated ceilings, shafts or plant rooms.

Keeping the cost down

  • Ask the fire engineer to define exactly which elements need a rating.
  • Use heavier sections where they reduce the section factor of protected members.
  • Apply the coating in the factory with the steel.
  • Use boards on columns that need long ratings, coatings on beams.

FAQ

Does a sprinklered warehouse need intumescent paint?

Sometimes not on the main frame, but specific elements may still need protection – the building code, the fire engineer and the insurer decide.

Vi servono spessori e costi per il vostro progetto?Inviate l'elenco elementi e le classi di resistenza al fuoco – i nostri ingegneri preparano un'offerta di protezione antincendio.
Richiedi un'offerta

Preliminary calculations are provided for estimation purposes only. Final coating thickness and fire protection system selection must be verified against the approved product documentation, applicable project requirements and relevant engineering assessments.

Prossimo progetto

Progettate una struttura in acciaio all'estero?

Inviateci i vostri disegni o il modello IFC – il nostro ufficio preventivi risponde con ambito di fabbricazione, tempistiche e prezzo reso a destino.