Bâtir la confiance, garantir le succès Portail client dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success

Ingénierie de la protection incendie · article 7 sur 10

Fire protection for steel warehouses

Do steel warehouses need fire protection? When codes and insurers require it, which members are usually protected and how to keep the cost under control in large logistics buildings.

Équipe d'ingénierie World Steel · Mis à jour le 2026-10-16 · 2 min de lecture

Steel warehouse

Often less than you think – but rarely none

Many single-storey warehouses with sprinklers and short escape distances need no fire rating on the main portal frame. But codes and insurers often require protection for columns at fire walls, mezzanines, office blocks, escape routes and structures supporting fire-rated walls or racking.

Typical protected elements

  • Columns and rafters at compartment walls, so the wall stays standing.
  • Mezzanine beams and columns.
  • Office and amenities blocks inside the warehouse.
  • Steel supporting fire-rated ceilings, shafts or plant rooms.

Keeping the cost down

  • Ask the fire engineer to define exactly which elements need a rating.
  • Use heavier sections where they reduce the section factor of protected members.
  • Apply the coating in the factory with the steel.
  • Use boards on columns that need long ratings, coatings on beams.

FAQ

Does a sprinklered warehouse need intumescent paint?

Sometimes not on the main frame, but specific elements may still need protection – the building code, the fire engineer and the insurer decide.

Besoin de l'épaisseur et du coût pour votre projet ?Envoyez la liste des éléments et les degrés de résistance au feu – nos ingénieurs préparent une proposition de protection incendie.
Demander une offre

Preliminary calculations are provided for estimation purposes only. Final coating thickness and fire protection system selection must be verified against the approved product documentation, applicable project requirements and relevant engineering assessments.

Prochain projet

Un projet de structure métallique à l'étranger ?

Envoyez-nous vos plans ou votre maquette IFC – notre équipe de chiffrage vous répond avec le périmètre de fabrication, le planning et le prix rendu chantier.