ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
New Zealand
Featured 
Australia
Charpente métallique · Oceania
Oceania
Australia, New Zealand and the Pacific – fabricated to AS/NZS 5131 CC3.
- Projets
- 3
- Pays
- 1
- Normes applicables
- 13
- Certifications WSC
- AS/NZS 5131 · ISO 3834-2
World Steel – Oceania
World Steel supplies fabricated structural steel and pre-engineered buildings to Australia, New Zealand and the Pacific, with a plant certified to AS/NZS 5131 Construction Category CC3.
Australia and New Zealand share a joint family of AS/NZS standards for loads, materials, welding, fabrication and corrosion protection, while each country keeps its own steel design code – AS 4100 in Australia and NZS 3404 in New Zealand. Pacific island nations commonly specify the same AS/NZS standards.
AS/NZS 5131 sets the fabrication and erection requirements for structural steelwork through Construction Categories CC1 to CC4. World Steel is certified to CC3, which covers the large majority of building, industrial and infrastructure structures specified in the region.
Vietnam's free trade agreements with Australia and New Zealand (AANZFTA, CPTPP and RCEP) support competitive supply, and our export team prepares the ITP, material traceability and quality dossier expected by Australasian engineers.
Carte – Oceania
Carte plein écran →AsieEuropeAmériquesAfriqueOcéanieVietnam (origine)ProjetPays avec références
Projets – Oceania
3 projects
Aucun projet ne correspond à vos filtres.
Normes de structures métalliques pour Oceania
Codes and standards World Steel works to for projects in Oceania – what we are certified for, what we design and fabricate to, and the market requirements to confirm at tender.
Toutes les normes Australia & New Zealand →- WSC certified World Steel holds a certificate for this standard
- Applied by WSC World Steel designs, fabricates or supplies to this standard
- Market requirement Required in this market – project-specific, confirm at tender
Structural design
| AS 4100 | Steel structures | Applied by WSC |
|---|---|---|
| NZS 3404 | Steel structures standard | Applied by WSC |
| AS/NZS 4600 | Cold-formed steel structures | Applied by WSC |
Loads & actions
| AS/NZS 1170 | Structural design actions (general, permanent & imposed, wind, snow & ice) | Applied by WSC |
|---|
Fabrication & erection
| AS/NZS 5131 | Structural steelwork – Fabrication and erectionCertified to Construction Category CC3 – BSI Benchmark certificate BMP 827566 | WSC certified → |
|---|
Welding & quality
| AS/NZS 1554.1 | Structural steel welding – Welding of steel structures | Applied by WSC |
|---|---|---|
| ISO 3834-2 | Quality requirements for fusion welding of metallic materials – Comprehensive quality requirementsBureau Veritas Vietnam certificate INY-CER/23/1056 | WSC certified → |
Steel materials
| AS/NZS 3679.1 | Structural steel – Hot-rolled bars and sections | Applied by WSC |
|---|---|---|
| AS/NZS 3678 | Structural steel – Hot-rolled plates, floorplates and slabs | Applied by WSC |
| AS/NZS 1163 | Cold-formed structural steel hollow sections | Applied by WSC |
Corrosion protection
| AS/NZS 4680 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles | Applied by WSC |
|---|---|---|
| AS/NZS 2312.1 | Protection of structural steel against atmospheric corrosion – Paint coatings | Applied by WSC |
Certification & compliance
| ACRS | Australasian Certification Authority for Reinforcing and Structural Steels – product certificationSteel from ACRS-certified mills when the specification calls for it | Market requirement |
|---|
Standards are listed for orientation. The governing codes, editions and execution / construction categories are those of the project specification – please send us yours with the enquiry.
Matériaux que nous fournissons pour Oceania
Steel grades, coated products and corrosion protection typically supplied to projects in Oceania, with mill certificates and full traceability.
Hot-rolled sections
AS/NZS 3679.1 Grade 300 / 350
Plate & welded sections
AS/NZS 3678 Grade 250 / 350
Hollow sections
AS/NZS 1163 C350L0 / C450L0
Purlins, girts & sheeting
AS 1397 G450 / G550 zinc and aluminium-zinc coated strip
Bolts
AS/NZS 1252 Property Class 8.8
Corrosion protection
Hot-dip galvanizing to AS/NZS 4680 · paint systems to AS/NZS 2312.1
L'offre World Steel pour Oceania
Solutions
Design & EngineeringOur engineers turn architectural drawings into an optimised steel solution, then detail every member for the shop and every step for site.
Fabrication & ManufacturingFrom the largest built-up members to small fittings, every component is cut, welded, blasted, painted and coded in our own plant under certified quality systems.
Export Supply & LogisticsWe supply fabricated steel to projects in 30+ countries, with packing, documentation and trade compliance handled by our export team.
Products
Steel Frame StructuresColumns, beams and bracing for heavy industrial buildings, multi-storey and high-rise frames – fabricated to your drawings and code.
Pre-Engineered Steel Buildings (PEB)Factories, warehouses and halls supplied as a complete system: primary frames, secondary members, cladding and accessories.
Trusses & Long-Span Roof StructuresTruss, space-grid, dome and arch roofs for terminals, halls, stadiums and other large column-free spaces.
Equipment Support Structures, Racks & TowersSteel supports for process equipment, rack systems, platforms and towers for industrial and infrastructure projects.
Secondary Members – Purlins, Girts & StrutsCold-formed C, Z and U purlins and girts, struts and girder beams that carry the cladding and tie the frames together.
Secteurs desservis
40,000 t/yearcapacité de fabrication
AS/NZS 5131 CC3certifié
EN 1090-2 EXC3certifié
ISO 3834-2certifié
IAS AC472certifié
ISO 9001certifié