Fabriqué au Vietnam · livré dans le monde entier

Produits en acier

Caillebotis, escaliers, garde-corps, échelles, plateformes et métallerie diverse – étudiés, fabriqués, galvanisés ou peints et documentés par World Steel selon les normes américaines, australiennes et européennes.

Produits: 145
Catégories: 22
Systèmes de codes: US · AU · EU
Certifications: 3

Demander un devis Normes et certifications

Plateforme d'accès en acier avec caillebotis, garde-corps, escalier et échelle

WS steel grating & floor plate

World Steel's flagship grating range: WS bar grating 20×3 to 150×8 mm in 30, 40 and 60 mm meshes, load and span tables, heavy-duty, serrated and stainless grating, stair treads T1–T6, GT/GU trench covers, GM pit covers, clips and checkered plate – galvanised and cut to layout.

Tous →

Isometric render of hot-dip galvanized welded steel bar grating panels on a walkway frame

Steel gratingSteel bar gratingWS welded bar grating, bars 20×3 to 150×8 mm at 30, 40 or 60 mm pitch – plain or serrated, galvanised and cut to layout for platforms and floors.

Three grating panels of increasing bar depth on increasing spans

Steel gratingLoad & span tablesSafe loads, deflections, weights and recommended spans for WS grating with bars at 30, 40 and 60 mm – the tables used to select every panel.

Heavy-duty galvanized grating covering a concrete trench

Steel gratingHeavy-duty gratingWS heavy-duty grating, bars 45×5 to 150×8 mm with 8×8 mm cross bars, for 5–7.5 kPa floors, forklifts, vehicle trenches and heavy equipment.

Serrated steel grating panels on a support frame

Steel gratingSerrated gratingWS serrated grating with notched bearing bars for slip resistance in wet, oily, icy and outdoor areas – any WS size and mesh, with published load and deflection factors.

Stainless steel grating walkway beside process tanks

Steel gratingStainless gratingWS stainless grating in SUS304 and SUS316 for food, pharmaceutical, chemical, water and marine areas – pickled and passivated after welding.

Isometric 3D illustration of press-locked steel grating panels with a fine rectangular mesh on a walkway frame

Steel gratingPress-locked gratingPress-locked steel and stainless bar grating with a flush top and tight meshes for walkways, facades and sun screens – galvanised or stainless, for export.

Galvanized grating stair treads with checkered nosing on steel stringers

Steel gratingGrating stair treadsWS grating stair treads T1–T6 – welded or bolted, with no nosing, checker-plate or abrasive anti-slip nosing, in standard widths or to order.

Steel trench with cast-in frame and grating covers

Steel gratingTrench coversWS-GT covers in angle seat frames and WS-GU banded covers for U-channels – trenches 100–600 mm wide, classes T-2 to T-25, galvanised.

Galvanised grating pit covers in a concrete slab, one opened

Steel gratingDrainage pit coversWS-GM grating covers and bedframes for drainage pits 300 × 400 to 700 × 700 mm in load classes T-2, T-14, T-20 and T-25 – supplied as matched, galvanised sets.

Grating panels fixed to steel beams with saddle clips

Steel gratingClips & fastenersWS saddle clips (M and L types), hold-downs, M8 bolts and weld fixing details for installing steel grating – galvanised or stainless, supplied with every grating package.

Isometric 3D illustration of aluminium bar grating panels on a roof access walkway

Steel gratingAluminium gratingLightweight aluminium bar grating for marine, wastewater, food and roof walkways – pressure-locked or riveted, supplied with steel frames for export projects.

Isometric render of a stiffened checkered steel floor plate panel

Steel gratingFloor plateCheckered steel floor plate to ASTM A786, AS/NZS 3678 and EN 10025-2 – cut, stiffened, drilled and galvanized or painted for export projects.

Civil drainage grates & covers

Galvanised steel, stainless and heavy-duty grates, ductile iron and composite access covers, multi-part covers and custom civil products – to AS 3996, EN 124 and AASHTO load classes, fabricated and supplied with the steel package.

Tous →

Hot-dip galvanised steel drainage grate seated in an angle frame

Civil drainageSteel drainage gratesHot-dip galvanised steel drainage grates and angle frames for pits, trenches and inlets – AS 3996 classes A–D, EN 124 and AASHTO, fabricated for export.

Heavy-duty galvanised steel road grate in a deep steel frame

Civil drainageHeavy-duty road gratesHeavy-duty galvanised steel road grates and frames for ports, freight yards and haul roads – AS 3996 classes D–G, EN 124 D400–F900 and AASHTO HS-20.

Stainless steel slot channel grate set in a paved surface

Civil drainageStainless drain gratesStainless steel 304/316 slot, wedge-wire and heel-guard channel grates for plazas, pools, kitchens and food plants – welded to AS/NZS 1554.6 and AWS D1.6.

Ductile iron access cover and grate in cast frames

Civil drainageDuctile iron coversDuctile iron grates, access covers and frames for sewer, stormwater and utility pits – AS 3996, EN 124 and AASHTO classes, supplied with the steel package.

Composite access cover with lifting points in a frame

Civil drainageComposite coversComposite GRP and polymer access covers – light, non-conductive and theft-deterrent – to AS 3996 and EN 124 classes, supplied with World Steel steel frames.

3D render of a large access opening closed by several cover segments on removable intermediate beams

Civil drainageMulti-part coversMulti-part access covers on removable galvanised support beams for valve chambers, pump stations and large pits – to AS 3996, EN 124 or AASHTO loads.

3D render of a kerb inlet pit with a galvanised steel grate and frame at a road kerb

Civil drainageRoad-authority gratesKerb inlet and gully grates and frames fabricated to the state road-authority standard drawing named in your specification – galvanised and fully documented.

3D render of a concrete headwall with a galvanised steel trash rack and hinged grate

Civil drainageCustom civil productsMade-to-drawing grates, frames, hinged covers, trash racks, debris screens and pit ladders – designed to the required load class, galvanised and shipped for export.

Expanded & perforated metal

Expanded metal mesh, aluminium mesh, perforated panels and framed security and decorative screens – for facades, sunscreens, walkways, guards and enclosures, cut, framed and finished to drawings.

Tous →

3D render of raised expanded metal mesh sheets with diamond openings

Expanded & perforated metalExpanded metalExpanded metal mesh in mild steel, stainless or aluminium – raised or flattened, cut to size or framed into panels for walkways, guards and screens for export.

3D render of powder-coated aluminium expanded mesh facade panels on a car park

Expanded & perforated metalAluminium meshAluminium expanded mesh panels for facades, sunscreens, ceilings and car park screens – anodised or powder-coated, framed with brackets for export projects.

3D render of powder-coated perforated metal facade panels with round holes

Expanded & perforated metalPerforated metalPerforated metal sheet and panels – round, square, slotted or image perforation in steel, stainless or aluminium, folded and powder-coated for export projects.

3D render of a framed heavy mesh enclosure with a lockable gate around plant equipment

Expanded & perforated metalSecurity meshFramed security and decorative mesh screens – plant enclosures, storage cages, partitions and window screens in galvanised or powder-coated steel, for export.

FRP grating, handrail & sections

Fibreglass reinforced plastic grating, stair treads, modular handrail and pultruded structural sections for corrosive, marine and electrical environments – supplied and coordinated with the steel package.

Tous →

3D render of yellow FRP grating panels on a galvanised steel platform frame

FRP productsFRP gratingMoulded and pultruded FRP grating for corrosive, marine and electrical areas – supplied from specialist makers and fitted to World Steel platforms for export.

3D render of a steel stair fitted with FRP grating treads and yellow nosings

FRP productsFRP stair treadsFRP grating and solid stair treads with contrasting anti-slip nosing – supplied with World Steel stairs to AS 1657, OSHA 1910.25 and EN ISO 14122-3.

3D render of yellow FRP modular handrail around a platform with kick plates

FRP productsFRP handrailNon-conductive FRP modular handrail – pultruded posts and rails with moulded connectors, supplied and installed with World Steel platforms for export.

3D render of pultruded FRP I-beams, channels, angles and tubes

FRP productsFRP sectionsPultruded FRP I-beams, channels, angles, tubes and plates to EN 13706 – supplied from specialist makers with World Steel engineering coordination for export.

Site safety – dropped-object prevention

Retrofit handrail infill panels, stair gap closures, fine-mesh grating overlays and clamp-on toe boards that stop tools and materials falling from platforms, walkways and stairs – fitted without hot work.

Tous →

Isometric 3D render of mesh infill panels clamped to an existing platform handrail

Site safetyHandrail infill panelsClamp-on mesh infill panels that close existing handrails against dropped objects – made to site survey, galvanised, for AU, US and EU plant sites.

Isometric 3D render of an existing steel stair with closure panels on risers and under the handrail

Site safetyStair gap panelsBolt-on panels that close open risers, tread-to-stringer gaps and handrail triangles on existing steel stairs – galvanised, for AU, US and EU sites.

Isometric 3D render of a fine-mesh overlay clamped on top of bar grating

Site safetyGrating overlaysClamp-on fine-mesh and perforated overlays for existing bar grating that stop small objects falling through – galvanised or stainless, for AU, US and EU plants.

Isometric 3D render of a toe board clamped to existing handrail stanchions at a platform edge

Site safetyClamp-on toe boardsRetrofit toe boards clamped to existing stanchions where toe boards are missing or too low – 100–150 mm, galvanised or yellow, to AS 1657, OSHA and EN ISO 14122.

WS modular homes

Factory-built steel modular homes on one 12.0 × 4.5 × 3.1 m module – studio, two-bedroom cabin, bedroom suite, two-storey family and courtyard homes – in Base, Fire-rated or custom variants.

Tous →

Galvanised steel frame of a WS module with joists, bathroom pod and footings

Modular homesModule systemThe WS module: a 12.0 × 4.5 × 3.1 m galvanised Q355 steel frame with floor, walls, roof, bathroom pod and services – the base of every WS home.

Single-module WS Studio 54 modular home with timber deck and pool

Modular homesStudio 54A one-module studio home – 54 m² with open living and dining, galley kitchen, bathroom pod and bedroom zone – factory-built for fast deployment.

WS 2B Cabin single-module two-bedroom modular home with deck

Modular homes2B CabinA one-module two-bedroom cabin – 54 m² with a bedroom at each end, central kitchen and shared bathroom pod – for workforce, holiday and remote housing.

WS 2B Suite single-module bedroom wing with deck

Modular homes2B SuiteA one-module bedroom wing – two bedrooms with a shared bathroom core and no kitchen – to combine with a living module for family and courtyard homes.

Two-storey WS Family Living modular home with balcony and glass balustrade

Modular homesFamily LivingA two-storey family home from two stacked modules – about 108 m² with living, kitchen and dining below and two bedrooms, bathroom and balcony above.

WS Family Courtyard home of three modules around a central deck

Modular homesFamily CourtyardA courtyard home from three modules – about 162 m² with a living module and two bedroom wings around a private court with deck or pool.

WS overhead cranes, gantries & hoists

Single and double girder overhead cranes, gantry and semi-gantry cranes, jib cranes, monorails, electric wire rope hoists 1–50 t, transfer carts and crane accessories – girders and runways built in our steel plant.

Tous →

Single girder overhead crane with end carriages and wire rope hoist

Cranes & hoistsSingle girder craneWS single girder overhead cranes with box or I girders and an underhung wire rope hoist – economical lifting for workshops and warehouses to 20 t.

Double girder overhead crane with top-running trolley hoist

Cranes & hoistsDouble girder craneWS double girder overhead cranes with box girders, top-running trolley hoist and maintenance walkway – for heavy loads, long spans and maximum hook height.

Double girder gantry crane lifting a container

Cranes & hoistsGantry cranesWS single and double girder gantry cranes, with cantilevers on one or both sides – for stock yards, precast plants, steel yards and hydropower.

Semi-gantry crane along a factory building

Cranes & hoistsSemi-gantry craneWS semi-gantry cranes run on a ground rail on one side and a runway beam on the building or wall on the other – ideal along building walls and loading bays.

Pillar jib crane on a quay with counterweight

Cranes & hoistsJib cranesWS pillar and wall-mounted jib cranes with electric hoists – slewing lifting for workstations, machines and quays, from light loads to heavy outdoor jibs.

Monorail hoist on an overhead beam in a building

Cranes & hoistsMonorail systemsWS monorail systems with electric wire rope or chain hoists on straight or curved beams (radius from 1.5 m) – for process lines, stores and machine loading.

Crane hoist trolley with rope drum, gearbox and motor

Cranes & hoistsWire rope hoistsWS electric wire rope hoists from 1 to 50 t in FEM 1Am–3m, with single-rail, double-rail, low-headroom and foot-mounted versions and a full option list.

Cranes & hoistsCrane accessoriesCrane components and spares: control panels, pendants, radio remotes, geared motors, inverters, conductor rails, collectors, wheels and cable reels.

Rail transfer cart carrying a paper roll

Cranes & hoistsTransfer cartsWS rail-mounted transfer carts for heavy loads between bays and process stations – capacities to 35 t and above, battery, cable-reel or conductor powered.

WS steel doors, frames & roll-up doors

Galvannealed hollow metal doors and frames in 20, 18 and 16 gauge, fire-rated to 3 hours – plus walk doors for metal buildings, modular and container doors, roll-up doors, windows and canopies, supplied as complete openings.

Tous →

Insulated hollow metal walk doors in a red steel-clad industrial building

Steel doors & framesHollow metal doorsCommercial hollow metal doors and frames in 20, 18 and 16 gauge galvannealed steel – insulated cores, fire-rated to 3 hours, prepared for any hardware.

Prime painted 18 gauge stock hollow metal door

Steel doors & framesFast-pack doorsStock 3070 hollow metal doors and 5¾ in masonry frames, prime painted and pallet-packed – the quick, economical choice for standard openings and volume projects.

White prefinished steel door frame with casing

Steel doors & framesSteel door frames16 and 14 gauge galvannealed frames for drywall, masonry and existing openings, plus prefinished slip-on frames – fire-rated and anchored to the wall.

Pre-assembled walk door in a metal building wall

Steel doors & framesMetal building doors – PAFactory-assembled door, frame, sub-frame and hardware that bolts into the girts of a steel building – installed in about 30 minutes, wind- or fire-rated.

Knock-down walk door with red canopy in a metal building

Steel doors & framesMetal building doors – KDBoxed door-and-frame kits for steel buildings – 20 or 18 gauge galvannealed door, 16 gauge knock-down frame and hardware, assembled into the girt opening on site.

Modular site office with steel entrance doors

Steel doors & framesModular building doorsPre-hung 20 gauge doors in 16 gauge frames with an exterior surface flange – screwed over the module wall, ADA threshold, lockset and deadbolt ready.

Red weld-in steel door in a converted shipping container

Steel doors & framesContainer doorsAll-in-one pre-hung 20 gauge door and 16 gauge frame with a weld cap – placed in the cut container wall and welded in two steps. 3068, with or without vision lite.

Steel doors & framesRoll-up doorsRolling steel doors for self-storage, warehouses and RV bays – 26 gauge Grade 80 curtains, maintenance-free springs and wind-rated windlock versions.

Oak, birch and walnut finish flush doors

Steel doors & framesWood composite doorsPrefinished flush interior doors with embossed oak, walnut or birch finishes – hollow core, or 20-minute solid core – machined to hang in WS steel frames.

Steel doors & framesWindowsThermal-break and economical aluminium windows for metal buildings – sliders, single hung and fixed, with sub-frames for girt or framed openings.

Steel doors & framesDoor canopiesGalvalume steel canopies over walk doors – 3, 4 and 5 ft projections, designed for 140 mph wind and heavy snow, with integral gutter and matching colours.

Door hardware & access control

Grade 1 – 3 lever locks, knobsets and deadbolts, exit devices, door closers, hinges, trim, thresholds and keypad locks – prepared, keyed and supplied with the doors as one hardware set.

Tous →

Grade 1 heavy-duty cylindrical lever lock

Door hardwareLever locksetsGrade 1, 2 and 3 lever locks for every opening – heavy-duty cylindrical and mortise, interconnected locks with deadbolt, and tubular levers – keyed to your system.

Door hardwareKnobsets & deadboltsGrade 2 cylindrical and tubular knobsets and Grade 1 – 3 deadbolts, including indicator deadbolts – for offices, apartments, modular and site buildings.

Door hardwareExit devicesGrade 1 rim, surface vertical rod and mortise exit devices for single doors and pairs – heavy and maximum duty, fire-rated, with lever or pull trims.

Door closer installed on a commercial door

Door hardwareDoor closersSurface-applied hydraulic closers from standard to maximum duty – cast aluminium or cast steel, non-handed tri-pack mounting, adjustable spring power and backcheck.

Door hardwareDoor hingesFull-mortise butt hinges in 3½, 4 and 4½ in – plain bearing, standard and heavy ball bearing, spring hinges, pivots and continuous hinges, with non-removable pins.

Door hardwareDoor trim & sealsEverything to finish the opening – push, pull and kick plates, stops, flush bolts, door guards, ADA thresholds, sweeps, weatherstrip and drip caps.

Door hardwareAccess control locksGrade 2 keyed electronic levers and knobs, heavy-duty electronic and mechanical keypad levers, and keypad kits for exit devices – keyless entry without wiring.

Structural bolts & fasteners

High-strength structural bolts to ASTM F3125 (A325 / A490), AS/NZS 1252.1 8.8 and EN 14399 HV / HR, tension control bolts, ISO metric bolts 4.6 – 10.9, purlin bolts, nuts, washers, DTIs, threaded rods and cladding screws.

Tous →

Galvanized and black heavy hex structural bolts with nuts and hardened washers

Bolts & fastenersASTM F3125 boltsHeavy hex structural bolts to ASTM F3125 Grade A325 (120 ksi) and A490 (150 ksi), ½ – 1½ in, with A563 nuts and F436 washers – plain or galvanized.

Bolted splice with galvanized high-strength bolts through primed plates

Bolts & fastenersAS/NZS 1252 boltsAS/NZS 1252.1 high-strength structural bolting assemblies, property class 8.8, M16 – M36, hot-dip galvanized for 8.8/S, 8.8/TB and 8.8/TF joints to AS 4100.

HV and HR preloadable bolting assemblies with two washers

Bolts & fastenersEN 14399 HV / HREN 14399 preloadable structural bolting assemblies – HR 8.8 / 10.9 and HV 10.9, M12 – M36, k-class K1 or K2, CE marked, for EN 1090 execution classes.

Round head tension control bolt with spline and nut

Bolts & fastenersTC boltsTwist-off tension control bolts – ASTM F3125 Grade F1852 / F2280, EN 14399-10 HRC and JSS II 09 S10T – installed by shear wrench from one side.

Bolts & fastenersMetric hex boltsMetric hexagon bolts and set screws ISO 4014 / 4017 (DIN 931 / 933) in classes 4.6, 5.6, 8.8 and 10.9, M6 – M64, with ISO 4032 nuts – plain, zinc or galvanized.

Lapped Z purlins bolted to a rafter cleat

Bolts & fastenersPurlin boltsGalvanized M12 and M16 purlin bolts with nuts and washers, class 4.6 or 8.8 – for purlin laps, girt cleats, bracing and flange braces in steel buildings.

Heavy hex nuts, hardened washers, square plate washers and DTI washers

Bolts & fastenersNuts, washers, DTIsHeavy hex nuts (A563, A194 2H, ISO 4032, EN 14399), hardened and plate washers, bevel washers and direct tension indicators F959 / EN 14399-9.

Bundle of galvanized threaded rods with a stud bolt and nut

Bolts & fastenersThreaded rodsFully threaded rods and stud bolts – ASTM A193 B7, A307, F1554, ISO 898-1 4.6 – 10.9, DIN 976 and A2 / A4 stainless – cut to length, galvanized or plain.

Self-drilling screws with EPDM washers fixing roof sheets

Bolts & fastenersCladding screwsSelf-drilling hex-washer-head screws with EPDM washers for roof and wall sheeting to purlins and girts – corrosion class 3 / 4, stitching screws and rivets.

Anchor bolts & chemical anchors

Cast-in anchor rods ASTM F1554 and metric anchor bolts M16 – M64, anchor bolt cages with templates, chemical (bonded) anchors, capsules, post-installed rebar and mechanical anchors.

Tous →

L, headed and J anchor rods with colour-coded ends

Anchor bolts & anchorsF1554 anchor rodsCast-in anchor rods to ASTM F1554 Grade 36, 55 and 105 – L, J and headed, ½ – 4 in, colour-coded ends, heavy hex nuts and plate washers, plain or galvanized.

L, J, headed and straight metric anchor bolts

Anchor bolts & anchorsMetric anchor boltsCast-in metric anchor bolts M16 – M64, class 4.6, 5.6 or 8.8 (ISO 898-1 / AS 1111) – L, J, headed, straight and hammer-head types, galvanized or plain.

Anchor bolt cage with top template, bottom plate and sleeves

Anchor bolts & anchorsAnchor bolt cagesPre-assembled anchor bolt cages with top templates, bottom rings, sleeves and levelling nuts – set as one unit before the pour so every column fits.

Chemical anchors in a concrete section with injection cartridge

Anchor bolts & anchorsChemical anchorsInjection chemical anchors in epoxy, vinylester, hybrid and polyester mortars with rods M8 – M30+ – ETA / ICC-ES approved, cracked or uncracked concrete.

Capsule anchor set in concrete with a glass capsule beside

Anchor bolts & anchorsCapsule anchorsGlass and foil capsule chemical anchors – pre-measured resin, set by spinning or hammering the anchor rod – for repetitive, high-load fixings in concrete.

Anchor rods and internally threaded sleeves

Anchor bolts & anchorsAnchor rods & sleevesThreaded anchor rods with chisel end in 5.8, 8.8 and A4 stainless, and internally threaded sleeves – matched to the approved chemical mortar.

Starter bars bonded into an existing concrete member

Anchor bolts & anchorsPost-installed rebarRebar bonded into existing concrete with approved mortars – starter bars, slab and wall extensions, lap splices – to EN 1992-1-1 / EAD 330087 or ACI 318.

Wedge, sleeve and screw anchors in a concrete section

Anchor bolts & anchorsMechanical anchorsPost-installed mechanical anchors – wedge, sleeve, undercut and concrete screw anchors – loadable immediately, approved for cracked or uncracked concrete.

Light gauge steel framing

Cold-formed C studs, tracks, joists, roof trusses, battens and connectors in G550 / G300 Z275 – AZ150 steel, supplied as members, prefabricated panels, cassettes, modules or complete building kits.

Tous →

Light gauge steelC studs & tracksCold roll-formed lipped C studs and U tracks, webs 75 – 150 mm, 0.75 – 1.6 mm G550 / G300 steel, Z275 or AZ150 – punched, dimpled and labelled for each panel.

LGS wall panel with window opening, lintel and strap bracing

Light gauge steelWall panelsPrefabricated load-bearing LGS wall panels – studs at 400 / 600 mm, tracks, noggings, lintels and strap or sheet bracing – for houses and mid-rise buildings.

LGS floor cassette with joists and part deck

Light gauge steelFloor joistsLipped C floor joists 150 – 300 mm with rim tracks, web stiffeners and bridging – loose or as prefabricated floor cassettes with deck sheeting.

Row of LGS roof trusses with top-hat battens

Light gauge steelRoof trussesScrew-fastened light gauge steel roof trusses – gable, hip and mono, spans to about 15 m – for houses, schools and roofs over concrete frames.

Stacks of top-hat roof battens and furring channels

Light gauge steelBattens & furringTop-hat roof battens and ceiling furring channels in 0.42 – 1.2 mm high-tensile steel – for metal roofing, tiles, plasterboard ceilings and wall linings.

Light gauge steelInfill walls & partitionsNon-load-bearing LGS infill walls for steel and concrete frames, facade backing and drywall partitions – deflection heads, fire and acoustic systems.

LGS studs in track with hold-down, anchor and strap

Light gauge steelConnections & anchorsSelf-drilling screws, hold-downs, tension straps, clips and anchors that turn LGS members into a structure – fixed to slabs with chemical or mechanical anchors.

Volumetric LGS module frame with floor and openings

Light gauge steelPanels & modulesFactory-built LGS wall, floor and roof panels and volumetric modules – fitted out off-site for site offices, housing, hotels and camps.

Light gauge steelLGS houses & buildingsComplete light gauge steel building kits – walls, floors, trusses, battens, connectors and drawings – for houses, schools, clinics and low-rise buildings.

Steel stairs

Straight, switchback and spiral steel stairs – stringers, treads, landings and rails fabricated to OSHA / IBC, AS 1657 / NCC and EN ISO 14122 geometry.

Tous →

Isometric render of a straight steel stair with channel stringers, grating treads and handrails

StairsStraight stairsStraight steel stairs with stringers, treads, landings and handrails, fabricated to OSHA/IBC, AS 1657/NCC and EN ISO 14122 geometry for export.

Isometric render of a two-flight switchback steel stair with intermediate landing

StairsSwitchback stairsSwitchback and multi-storey egress stairs in steel – flights, landings, rails and towers fabricated to IBC/OSHA, NCC/AS 1657 and EN rules for export.

Isometric render of a spiral steel stair with centre column, wedge treads and helical handrail

StairsSpiral stairsSpiral steel stairs with centre column, wedge treads and continuous handrail – fabricated to OSHA/IBC, NCC and EN rules for compact access worldwide.

WS modular handrail systems

Bolt-together steel handrail and guardrail systems – top-mounted, side-mounted, stair and free-standing roof-edge rails, with stanchions, connectors, gates, toe boards and infill panels from one modular range, fabricated and hot-dip galvanized in our plant.

Tous →

3D render of a WS modular guardrail on a steel platform with grating deck

Modular handrailWS-MH-100Top-mounted guardrailBolt-together top-mounted steel guardrail with top rail, knee rail and toe board – galvanized, no site welding, to OSHA, AS 1657 and EN ISO 14122-3.

3D render of a side-mounted modular handrail fixed to the edge channels of a platform

Modular handrailWS-MH-200Side-mounted handrailFascia-mounted modular steel handrail bolted to the side of beams, channels or slab edges – keeps walkway width clear; galvanized, no site welding.

3D render of a steel stair with raking modular handrails joining the landing guardrail

Modular handrailWS-MH-300Stair handrailRaking modular handrail for steel stairs and ramps with adjustable stair fittings – continuous with the landing guardrail; galvanized, bolt-together.

3D render of a free-standing counterweighted guardrail along a flat roof edge

Modular handrailWS-MH-400Roof-edge guardrailNon-penetrating counterweighted steel guardrail for flat roofs – protects plant access without drilling the roof; modular, galvanized, AS 1657 / EN ISO 14122-3.

3D render of five types of modular handrail stanchions on a plinth

Modular handrailWS-MH-SStanchionsSteel stanchions for the WS modular handrail – top-mounted, side-mounted, socket and raked posts with 2 or 3 rail fittings, galvanized.

3D render of a galvanised tube clamp handrail along a roof access walkway

Modular handrailWS-MH-500Tube clamp handrailTube clamp handrail kits – galvanised slip-on fittings with grub screws on 33.7–48.3 mm tube, no welding. Loads checked to AS, US and EU codes.

3D render of a powder-coated steel picket balustrade along a mezzanine edge

Modular handrailWS-MH-600Commercial balustradeModular steel picket balustrade panels bolted to posts for balconies, mezzanines, stairs, car parks – to NCC, IBC and EN 1991-1-1, galvanised or powder-coated.

3D render of a modular guardrail showing corner, tee and splice connectors

Modular handrailWS-MH-CRail connectorsFabricated steel fittings that join WS modular handrail rails – splices, 90° corners, tees, crosses and adjustable knuckles; galvanized, set-screw locked.

3D render of a galvanised bikeway barrier with rub rail and mesh infill along a shared path

Modular handrailWS-MH-700Bikeway barrierModular steel barrier for shared paths, cycleways and footbridges – rub rail, mesh or picket infill, galvanised, to Austroads, AS 5100 and export specs.

3D render of a wall-mounted handrail on brackets with a return at the end

Modular handrailWS-MH-EEnd fittings & bracketsEnd caps, returns, wall flanges and wall-mounted handrail brackets for the WS modular handrail – finishing every run safely; galvanized steel.

3D render of continuous accessible handrails on both sides of a concrete ramp with landings

Modular handrailWS-MH-800Accessible handrailContinuous accessible handrails for ramps and stairs – AS 1428.1, ADA and EN 17210 heights, diameters and clearances, in stainless or galvanised steel.

3D render of a stanchion anchored to concrete and another clamped to a steel beam

Modular handrailWS-MH-FFixing kitsAnchor kits, bolt sets and no-drill beam clamps for fixing WS modular handrail stanchions to concrete, steel beams and grating – galvanized.

Handrails, guardrails & balustrades

Industrial pipe and tube guardrails, ball-stanchion handrails and architectural balustrades with glass or picket infill.

Tous →

Isometric 3D render of an industrial steel guardrail with posts, top rail, mid rail and toe board

Handrails & balustradesIndustrial handrailsSteel pipe and tube guardrails, handrails and toe boards for platforms and stairs – fabricated to OSHA, AS 1657 and EN ISO 14122-3 for export projects.

Isometric 3D render of a ball-stanchion handrail with two tube rails

Handrails & balustradesBall stanchionsBall-stanchion tube handrails in galvanised steel, aluminium or stainless – fixed or removable, detailed to OSHA, AS 1657 and EN ISO 14122-3.

Isometric 3D render of an architectural steel balustrade with glass infill panels and top rail

Handrails & balustradesBalustradesSteel and stainless balustrades with glass, picket or mesh infill for stairs, mezzanines and atriums – detailed to IBC, NCC/AS 1288 and EN codes for export.

Isometric 3D illustration of a curved steel handrail following a radiused platform and raked stair

Handrails & balustradesCustom handrailsProject-specific steel, stainless and aluminium handrails – curved, raked and odd-geometry runs, Tekla-modelled and fabricated to AS/NZS 5131 and EN 1090-2.

Fixed ladders & ship ladders

Fixed rung ladders with cages or ladder safety systems, and ship ladders for steep access to roofs, tanks and equipment.

Tous →

Isometric 3D render of a steel fixed ladder with safety cage hoops and vertical straps

LaddersFixed laddersSteel fixed rung ladders with cages, rest platforms or ladder safety system brackets – fabricated to OSHA 1910.23, AS 1657 and EN ISO 14122-4 for export.

Isometric 3D render of a steel ship ladder with grating treads and handrails on both sides

LaddersShip laddersSteep steel ship ladders (ship stairs) with treads and handrails for roofs, mezzanines and equipment – to OSHA 1910.25(e), AS 1657 and EN ISO 14122-3.

Platforms & support structures

Access platforms, walkways, mezzanines, crossovers, equipment supports and pipe racks – complete with grating, rails and access.

Tous →

Isometric 3D render of a steel access platform with grating deck, guardrails, stair and ladder

Platforms & supportsAccess platformsSteel access platforms and walkways with grating, guardrails, stairs and ladders – designed and fabricated to OSHA, AS 1657 and EN ISO 14122-2 for export.

Isometric 3D render of a steel mezzanine floor with columns, beams, deck, stair and guardrail

Platforms & supportsMezzaninesSteel mezzanine floors for warehouses, factories and offices – frame, deck, stairs and guardrails designed to IBC/ASCE 7, AS/NZS 1170 and Eurocodes for export.

Isometric 3D render of a steel crossover stair spanning a pipe run

Platforms & supportsCrossoversSteel crossover platforms and stair bridges over pipes, conveyors and ducts, fabricated to OSHA, AS 1657 and EN ISO 14122 for export projects.

Isometric 3D render of a braced steel equipment support frame with service platform

Platforms & supportsEquipment supportsSteel equipment support frames, skids and service platforms for tanks, chillers, fans and process plant, fabricated to US, AU and EU codes for export.

Isometric 3D render of a multi-bent steel pipe rack carrying pipes

Platforms & supportsPipe racksSteel pipe racks, pipe bridges and pipe supports for process plants and utilities, fabricated in Vietnam to US, AU and EU codes for export.

Miscellaneous metals

Cast-in embed plates and anchors, steel lintels, canopies and bollards – the steel items every building package needs.

Tous →

Isometric 3D render of a steel embed plate with welded headed studs

Misc. metalsEmbed platesSteel embed plates with headed studs, anchor bolt assemblies and cast-in angles, fabricated to AWS D1.1, AS/NZS 1554.2 and EN ISO 14555 for export.

Isometric 3D render of galvanized steel lintels and a shelf angle

Misc. metalsLintelsGalvanized steel lintels, loose angle lintels and shelf angles for masonry openings, fabricated to TMS 402, AS/NZS 2699.3 and EN 845-2 for export.

Isometric 3D render of a cantilever steel entrance canopy with tie rods

Misc. metalsCanopiesCantilever, tie-rod and post-supported steel canopies and awnings for entrances and loading docks, fabricated to US, AU and EU standards for export.

Isometric 3D render of steel pipe bollards and a rail barrier

Misc. metalsBollards & barriersSteel pipe bollards, column guards and rail barriers for buildings, docks and car parks, fabricated for export to US, AU and EU project specifications.

Roof & wall sheeting

WS standing seam, clip-lock, trapezoidal, insulated and curved roof and wall sheets – with coated coil, trims, gutters and accessories – roll-formed for industrial and PEB buildings.

Tous →

Standing seam roof sheets fixed with concealed clips on Z purlins

Roof & wall sheetsStanding seam roofWS Seamlock standing seam roof sheets – concealed clips, mechanically seamed ribs, 470–1040 mm cover and 60–82 mm ribs for long, low-slope industrial roofs.

Concealed-fix clip-lock roof sheets on purlins

Roof & wall sheetsClip-lock roofWS Cliplock concealed-fix roof sheets – 945–1000 mm cover, 39–41 mm ribs in G550 high-tensile steel, snapped onto clips with no exposed fasteners.

Trapezoidal roof sheets in four colours fixed on purlins

Roof & wall sheetsTrapezoidal sheetsWS trapezoidal and corrugated sheets with 5 to 13 ribs – roof, wall, ceiling and liner profiles from 0.25 to 0.60 mm, through-fastened on purlins and girts.

Insulated roof sheets with PU foam underside on purlins

Roof & wall sheetsInsulated sheetsWS insulated roof and wall sheets – 5- and 9-rib profiles with bonded PU foam 16–22 mm or PE/OPP foam 3–4 mm for heat, noise and condensation control.

Arched barrel roof of curved steel sheets

Roof & wall sheetsCurved sheetsWS curved roof sheets for barrel and arched roofs, and crimp-curved sheets for curved eaves and ridges – roll-curved from standard trapezoidal profiles.

Exploded view of the coating layers of pre-painted steel sheet

Roof & wall sheetsCoated steel sheetThe coil behind every WS sheet: galvanized (Z), zinc-aluminium (AZ) and pre-painted steel – coating layers, grades G300 to G550 and how to choose for each environment.

Roof corner with ridge capping, eave gutter, downspout and gable trim

Roof & wall sheetsTrims & accessoriesFlashings, gutters, downspouts, ridge capping, curved pieces, screws, sealants, foam closers and louvers – folded and supplied to match every WS sheet profile and colour.

Sandwich panels & floor decking

WS EPS sandwich panels for walls, partitions and ceilings, and composite floor decking 50 and 75 mm deep for steel-framed floors and mezzanines.

Tous →

EPS sandwich panels with white steel skins on purlins

Panels & deckingEPS sandwich panelsWS EPS sandwich panels 50–100 mm – steel skins bonded to an expanded-polystyrene core for walls, partitions, ceilings and clean rooms; PU and rock-wool cores on request.

Composite floor deck on steel beams with shear studs and concrete topping

Panels & deckingFloor deckingWS composite floor decking 50 and 75 mm deep, 0.58–1.60 mm thick – permanent formwork and tension reinforcement for composite slabs on steel beams and mezzanines.

Purlins & girts

WS cold-formed C and Z purlins and girts, galvanized and pre-punched – standard sizes C80–C300 and Z125–Z300 plus auto-size lines from 100 to 400 mm deep.

Tous →

Galvanized cold-formed C purlins of several sizes

Purlins & girtsC purlinsWS cold-formed C purlins and girts C80–C300, 1.2–3.0 mm, galvanized, pre-punched with oval holes – plus auto-size lines for any depth from 100 to 400 mm.

Galvanized cold-formed Z purlins of several sizes

Purlins & girtsZ purlinsWS cold-formed Z purlins Z125–Z300 with unequal flanges for lapping and continuity, 1.2–3.0 mm galvanized – auto-size line from 100 to 400 mm deep.

Corrosion & fire protection

Hot-dip galvanizing, epoxy, alkyd and duplex paint systems and intumescent fire protection – specified to ISO 12944, ASTM, AS/NZS and EN standards.

Tous →

Isometric render of steel beams coated with different protective systems for different corrosivity categories

Coatings & fireCorrosion protectionHow World Steel selects, applies and inspects corrosion protection for export steel – galvanizing, epoxy, alkyd and duplex to ISO 12944, AS/NZS and ASTM.

Isometric render of hot-dip galvanized steel beams, grating and handrail ready for dispatch

Coatings & fireHot-dip galvanizingHot-dip galvanized steel for export – process, coating thickness to ASTM A123, AS/NZS 4680 and EN ISO 1461, design for galvanizing, inspection and repair.

Isometric render of steel beams and columns painted with an epoxy and polyurethane system in the topcoat colour

Coatings & fireEpoxy systemsZinc-rich epoxy, epoxy MIO and polyurethane paint systems for structural steel in C3–C5 environments, applied and inspected to ISO 12944 and SSPC.

Isometric render of alkyd-primed steel frames and purlins for an interior building

Coatings & fireAlkyd systemsAlkyd primer and finish systems for PEB frames and interior steel in C1–C3 environments – where they fit, their limits and how they are specified to ISO 12944.

Isometric render of duplex-coated canopy beams in an architectural colour

Coatings & fireDuplex systemsDuplex coating – hot-dip galvanizing plus paint or powder – for coastal, architectural and canopy steel to ASTM D6386, AS/NZS 2312 and EN 15773.

Isometric render of steel beams and columns finished with intumescent coating and topcoat

Coatings & fireFire protectionIntumescent fire protection for structural steel – how it works, US, AU and EU fire ratings, thickness by section factor, application and inspection.

Isometric render of steel members coated with different protective paint systems

Coatings & firePaint brandsJotun, Hempel, International Paint, Carboline and regional coating systems applied at World Steel to ISO 12944 and project specifications.

Conformes aux normes de votre marché

Chaque produit est conçu, fabriqué et documenté selon les codes de sa destination – OSHA / IBC et NAAMM aux États-Unis, AS 1657, NCC et AS/NZS 5131 en Australie, EN ISO 14122 et EN 1090 en Europe.

Normes et certifications →

United StatesHow US codes govern structural steel, metal buildings and steel products – IBC, ASCE 7, AISC, AWS, OSHA – and how World Steel complies via IAS AC472.58 normes →

Australia & New ZealandHow the NCC, NZBC, AS/NZS 5131 and AS 4100 govern steelwork in Australia and NZ, and how World Steel delivers to CC3 with ISO 3834-2 welding.51 normes →

EuropeCE marking under EN 1090-1, EN 1090-2 execution classes and the Eurocodes explained – and how World Steel supplies EXC3 steelwork with a DoP.56 normes →

IAS AC472N° de certificat MB-268International Accreditation Service (IAS)Valable jusqu'au 1 Aug 2027

AS/NZS 5131 CC3N° de certificat BMP 827566BSI Group Australia & New Zealand (Benchmark Product Certification)Valable jusqu'au 31 Jul 2030

EN 1090 EXC3 · CEN° de certificat 2797 CPR 827443BSI Group The Netherlands B.V. – Notified Body 2797

Une seule chaîne qualité, du plan à l'expédition

Les produits en acier sont modélisés en 3D (Tekla / IFC), découpés et percés sur lignes CNC, soudés par des soudeurs qualifiés sous ISO 3834-2, contrôlés, galvanisés ou peints, pré-assemblés si spécifié et emballés pour l'export avec un dossier qualité complet.

Plans d'atelier et maquettes IFC pour approbation
Certificats matière et traçabilité complète
Soudage selon AWS D1.1, AS/NZS 1554.1 ou EN ISO 3834-2
Galvanisation à chaud selon ASTM A123, AS/NZS 4680 ou EN ISO 1461
Rapports d'inspection, déclaration des performances CE si requise

Produits en acier

WS steel grating & floor plate

Civil drainage grates & covers

Expanded & perforated metal

FRP grating, handrail & sections

Site safety – dropped-object prevention

WS modular homes

WS overhead cranes, gantries & hoists

WS steel doors, frames & roll-up doors

Door hardware & access control

Structural bolts & fasteners

Anchor bolts & chemical anchors

Light gauge steel framing

Steel stairs

WS modular handrail systems

Handrails, guardrails & balustrades

Fixed ladders & ship ladders

Platforms & support structures

Miscellaneous metals

Roof & wall sheeting

Sandwich panels & floor decking

Purlins & girts

Corrosion & fire protection

Conformes aux normes de votre marché

Une seule chaîne qualité, du plan à l'expédition

Un projet de structure métallique à l'étranger ?