ENEnglish
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
1 – 20 t
WS single girder overhead crane
Economical single girder cranes with underhung or low-headroom hoists.
Détails et tableaux →
Solution · WS cranes & hoists
Cranes built with the building that carries them
Single and double girder overhead cranes, gantry and semi-gantry cranes, jib cranes, monorails and electric wire rope hoists from 1 to 50 t – girders, end carriages and runway beams fabricated in our certified steel plant and delivered with the steel building.
- 1 – 50 t +
- Hoist and crane capacity
- FEM 1Am – 3m
- ISO M4 – M6 hoists heavier duty on request
- 7 – 80 m
- Hook travel
- 1 package
- Crane + runway + building
One supplier for the crane and the steel
A crane is only as good as the runway and the building that carry it. World Steel designs the crane, its wheel loads, the runway beams, brackets and the steel frame together – so deflections, clearances and fatigue are checked once, and the crane fits the building on the first lift.
Girders, end carriages, trolleys and runway beams are fabricated in our structural steel plant; hoists, drives and electrics are assembled and function-tested before shipment, then installed, load-tested and handed over with training and a maintenance plan.
WS crane range
Cranes, hoists and parts
Every product has its own page with types, tables and standards.
5 – 50 t +
WS double girder overhead crane
Box girders, top-running trolley, walkway and maximum hook height.
Détails et tableaux →
Yards · ports · hydro
WS gantry cranes
Single and double girder gantries, with cantilevers on one or both sides.
Détails et tableaux →
Leg + runway
WS semi-gantry crane
One leg on a ground rail, one end on the building runway.
Détails et tableaux →
Pillar · wall
WS jib cranes
Slewing jib cranes for workstations, machines and quays.
Détails et tableaux →
R ≥ 1.5 m
WS monorail hoist systems
Straight or curved monorails with trolley hoists.
Détails et tableaux →
WH · 1 – 50 t
WS electric wire rope hoists
Wire rope hoists with full technical table, options and type code.
Détails et tableaux →
Spare parts
WS crane accessories & spare parts
Panels, pendants, radio, motors, inverters, conductor rails, wheels.
Détails et tableaux →
to 35 t +
WS rail transfer carts
Rail transfer carts for heavy loads between bays.
Détails et tableaux →In operation
Cranes at work
Typical WS crane types in production halls, yards and plants.
double girder
Production halls
Two cranes sharing one runway in a long-span fabrication hall.
gantry
Outdoor yards
Gantry cranes over precast, pipe and steel stock yards.
single girder
Workshops
Several single girder cranes of different capacities in one workshop.
special gantries
Plants & hydropower
Intake gantries and maintenance cranes for power and process plants.
Applications
Where WS cranes lift
01
Steel & fabrication
Plate, sections and assemblies in fabrication and service centres.
02
Precast & construction materials
Moulds, piles, beams and pipes in yards and halls.
03
Manufacturing & assembly
Machines, dies and products along production lines.
04
Warehouses & logistics
Coils, bundles and heavy goods in stores.
05
Power, water & hydro
Turbine halls, pump stations and intake gates.
06
Ports & shipyards
Quay jibs, gantries and transfer carts.
Normes et conformité
Crane codes by market
Cranes are designed, tested and documented to the code of the project location. Key references:
Vietnam & Asia
- TCVN 4244:2005Lifting equipment – design, manufacture, inspection
- QCVN 07:2012/BLĐTBXHSafety regulation for lifting equipment
- FEM 9.511 · ISO 4301Duty groups of hoists and cranes
United States
- CMAA 70 / CMAA 74Top-running and single girder cranes
- ASME B30.2 · B30.17Overhead and gantry cranes
- ASME B30.16 · HST-4Hoists
- OSHA 1910.179Overhead and gantry cranes
Australia / NZ
- AS 1418.1 · AS 1418.18Cranes – general; runways and monorails
- AS 2550Cranes – safe use
- AS/NZS 5131 Certifié WSCFabrication – World Steel certified CC3
Europe
- EN 15011Bridge and gantry cranes
- EN 14492-2Power-driven hoists
- EN 13001Crane design
- EN 1090-2 Certifié WSCRunway steel – World Steel EXC3 · CE
Synthèse fournie à titre indicatif – le cahier des charges du projet, l'édition du code adoptée et l'autorité compétente prévalent.
Ingénierie
Every part has a job
Runway beams and rails, end carriages with buffers, the main girders, the hoist and trolley, conductor rails for long and cross travel, the control panel and pendant or radio – each part is selected for the capacity, span and duty of your crane.
On double girder cranes a walkway with handrail gives safe access for maintenance of the trolley, conductors and drives.
Ingénierie
Duty first, then capacity
A crane lifting 10 t twice a day and one lifting 10 t every few minutes are different machines. We select hoist, wheels, drives and girders for the duty group – FEM 1Am to 3m, ISO M4 to M6 for standard hoists, heavier groups on request – or the CMAA and AS 1418 classes of your project.
Ingénierie
Hoists you can specify line by line
WS wire rope hoists cover 1 to 50 t with 2/1 and 4/1 reeving, two speeds or inverter control, hook travel up to 80 m and versions for normal headroom, low headroom, double-rail trolleys and fixed mounting. One code describes capacity, frame, hook travel, speed, reeving, mounting, electrics, trolley speed and climate.
See the full table on the wire rope hoists page.
Ingénierie
From girder to load test
Built-up box girders are welded and inspected in the same plant as our structural steel – see built-up members – then fitted with end carriages, trolley, hoist and electrics and function-tested before shipping.
On site we check the runway, erect and align the crane and carry out static and dynamic load tests with the inspection authority before handover.
Spécifications
Specification & options
- Crane type
- Single / double girder overhead, gantry, semi-gantry, jib, monorail, transfer cart
- Hoist
- Wire rope hoist 1–50 t, chain hoist, open-winch trolley for heavy duty
- Speeds & control
- Two-speed or inverter; pendant, radio remote or cabin
- Safety
- Load limiter, limit switches, anti-collision sensors, emergency stop, warning lights
- Power supply
- Enclosed conductor rail, festoon or cable reel
- Environment
- Outdoor IP65, cold, high-temperature, tropical or chemical execution
- Runway & building
- Runway beams, rails, brackets and the steel building from World Steel
Processus
How we deliver a crane
- 1
Requirements
Capacity, span, lift, duty and building.
- 2
Engineering
Crane, wheel loads and runway together.
- 3
Fabrication
Girders, end carriages and trolleys in our plant.
- 4
Assembly & test
Hoist, drives, electrics, function test.
- 5
Installation
Runway check, erection and alignment.
- 6
Load test & care
Load test, training, maintenance plan.
Certification indépendante
Certified steel fabrication
AS/NZS 5131 CC3
EN 1090 EXC3 · CEFAQ
Questions fréquentes
Single or double girder – which do I need?
Single girder cranes are economical up to about 20 t and moderate spans. Double girder cranes suit heavier loads, longer spans, higher duty and maximum hook height, and give a walkway for maintenance.
Can you supply the crane together with the building?
Yes – that is our strength. World Steel designs the crane, runway beams and steel building together, so wheel loads, deflections and clearances are coordinated from the start.
Which standards do you design to?
TCVN 4244 and QCVN 07 in Vietnam, CMAA and ASME B30 in the US, AS 1418 in Australia and EN 15011 / EN 14492-2 in Europe, with the duty group of FEM 9.511 or ISO 4301.
Are the cranes load-tested?
Every crane is function-tested in the factory and load-tested on site – static and dynamic tests to the applicable code – with the inspection authority where required.
Do you provide maintenance and spare parts?
Yes – inspection, maintenance, repair, upgrades such as inverters or radio control, and spare parts including panels, pendants, motors, conductor rails and wheels.
Livraison · Incoterms® 2020
Livré selon vos conditions
World Steel cote départ usine, franco à bord ou rendu à votre port ou chantier. L'emballage export, les documents et l'expédition depuis Hô Chi Minh-Ville font partie du service.
Comparer les Incoterms® 2020 →FCAFree CarrierFOBFree On BoardCFRCost and FreightCIFCost, Insurance and FreightCPTCarriage Paid ToCIPCarriage and Insurance Paid To
Aussi selon le projet ou sur demande : EXW · FAS · DAP · DPU · DDP
Cambodia
Philippines
Lifting something heavy?
Send capacity, span, lift and your building – we return the crane selection, runway loads and a delivered, installed price.