Bâtir la confiance, garantir le succès Portail client dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success

Light gauge steel framing

LGS floor joists & cassettes

Lipped C floor joists 150 – 300 mm with rim tracks, web stiffeners and bridging – loose or as prefabricated floor cassettes with deck sheeting.

États-UnisAustralie / NZEurope

Demander un devis Caractéristiques

  • C joists 150 – 300 mm, to 2.4 mm
  • Rim tracks, web stiffeners, blocking
  • Loose members or factory cassettes
  • Service holes in line
  • Deck: particle board, plywood, cement board or steel deck
  • Floors for houses, mid-rise and mezzanines

What it is

Floor joists span between load-bearing walls or steel beams and carry the floor deck. Rim tracks close the ends, web stiffeners take concentrated loads at bearings, and bridging or strapping prevents the joists from rolling.

Joist sizes (indicative)
JoistBMTTypical span
C 1501.0 – 1.6 mmshort spans, ceilings
C 2001.15 – 2.0 mmresidential floors
C 250 – 3001.5 – 2.4 mmlonger spans, heavier loads

Spans depend on loads, deflection and vibration limits – every floor is designed for the project.

Cassettes

Prefabricated floor cassettes – joists, rim tracks and deck assembled in the factory – are lifted into place in minutes and give a working platform immediately.

Normes et exigences par marché

Les codes selon lesquels World Steel conçoit, fabrique et documente ce produit – et les principales exigences géométriques et de charge sur chaque marché.

États-Unis

  • AISI S100Cold-formed steel structural members
  • AISI S240Cold-formed steel structural framing
  • ASTM A1003 / C955Sheet steel and load-bearing studs
  • IBC Ch. 22Steel – cold-formed framing
Coating
G60 (Z180) minimum for structural framing members
Toutes les normes United States →

Australie / NZ

  • AS/NZS 4600Cold-formed steel structures
  • NASH StandardResidential and low-rise steel framing, Parts 1 & 2
  • AS 1397Steel sheet and strip – G550, Z / AZ coatings
  • NCCBuilding Code of Australia
Corrosion
coating class to NASH / AS 4312 exposure
Toutes les normes Australia & New Zealand →

Europe

  • EN 1993-1-3Cold-formed members and sheeting
  • EN 1090-4Execution of cold-formed structural elements
  • EN 10346Continuously hot-dip coated steel – S350GD – S550GD
  • EN 1993-1-1General rules
CE
EN 1090-1 for structural kits
Toutes les normes Europe →

Synthèse fournie à titre indicatif – le cahier des charges du projet, l'édition du code adoptée et l'autorité compétente prévalent.

Finitions

FinitionNormes / remarques
FrameZ275 / AZ150

Prochain projet

Un projet de structure métallique à l'étranger ?

Envoyez-nous vos plans ou votre maquette IFC – notre équipe de chiffrage vous répond avec le périmètre de fabrication, le planning et le prix rendu chantier.