신뢰 구축, 성공 보장 고객 포털 dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success

Light gauge steel framing

LGS floor joists & cassettes

Lipped C floor joists 150 – 300 mm with rim tracks, web stiffeners and bridging – loose or as prefabricated floor cassettes with deck sheeting.

미국호주 / 뉴질랜드유럽

견적 요청 사양

  • C joists 150 – 300 mm, to 2.4 mm
  • Rim tracks, web stiffeners, blocking
  • Loose members or factory cassettes
  • Service holes in line
  • Deck: particle board, plywood, cement board or steel deck
  • Floors for houses, mid-rise and mezzanines

What it is

Floor joists span between load-bearing walls or steel beams and carry the floor deck. Rim tracks close the ends, web stiffeners take concentrated loads at bearings, and bridging or strapping prevents the joists from rolling.

Joist sizes (indicative)
JoistBMTTypical span
C 1501.0 – 1.6 mmshort spans, ceilings
C 2001.15 – 2.0 mmresidential floors
C 250 – 3001.5 – 2.4 mmlonger spans, heavier loads

Spans depend on loads, deflection and vibration limits – every floor is designed for the project.

Cassettes

Prefabricated floor cassettes – joists, rim tracks and deck assembled in the factory – are lifted into place in minutes and give a working platform immediately.

시장별 표준 및 요구사항

World Steel이 본 제품의 설계, 제작, 문서화에 적용하는 기준 – 그리고 각 시장의 주요 형상 및 하중 요구사항.

미국

  • AISI S100Cold-formed steel structural members
  • AISI S240Cold-formed steel structural framing
  • ASTM A1003 / C955Sheet steel and load-bearing studs
  • IBC Ch. 22Steel – cold-formed framing
Coating
G60 (Z180) minimum for structural framing members
United States 표준 전체 →

호주 / 뉴질랜드

  • AS/NZS 4600Cold-formed steel structures
  • NASH StandardResidential and low-rise steel framing, Parts 1 & 2
  • AS 1397Steel sheet and strip – G550, Z / AZ coatings
  • NCCBuilding Code of Australia
Corrosion
coating class to NASH / AS 4312 exposure
Australia & New Zealand 표준 전체 →

유럽

  • EN 1993-1-3Cold-formed members and sheeting
  • EN 1090-4Execution of cold-formed structural elements
  • EN 10346Continuously hot-dip coated steel – S350GD – S550GD
  • EN 1993-1-1General rules
CE
EN 1090-1 for structural kits
Europe 표준 전체 →

참고용 요약입니다 – 프로젝트 시방서, 채택된 기준 판본 및 관할 기관의 요구가 우선합니다.

표면 처리

표면 처리표준 / 비고
FrameZ275 / AZ150

다음 프로젝트

해외 철골 구조물을 계획 중이십니까?

도면 또는 IFC 모델을 보내주십시오. 견적팀이 제작 범위, 일정 및 인도 가격을 회신해 드립니다.