בונים אמון, מבטיחים הצלחה פורטל לקוחות dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success

Light gauge steel framing

LGS floor joists & cassettes

Lipped C floor joists 150 – 300 mm with rim tracks, web stiffeners and bridging – loose or as prefabricated floor cassettes with deck sheeting.

ארצות הבריתאוסטרליה / ניו זילנדאירופה

בקשת הצעת מחיר מפרטים

  • C joists 150 – 300 mm, to 2.4 mm
  • Rim tracks, web stiffeners, blocking
  • Loose members or factory cassettes
  • Service holes in line
  • Deck: particle board, plywood, cement board or steel deck
  • Floors for houses, mid-rise and mezzanines

What it is

Floor joists span between load-bearing walls or steel beams and carry the floor deck. Rim tracks close the ends, web stiffeners take concentrated loads at bearings, and bridging or strapping prevents the joists from rolling.

Joist sizes (indicative)
JoistBMTTypical span
C 1501.0 – 1.6 mmshort spans, ceilings
C 2001.15 – 2.0 mmresidential floors
C 250 – 3001.5 – 2.4 mmlonger spans, heavier loads

Spans depend on loads, deflection and vibration limits – every floor is designed for the project.

Cassettes

Prefabricated floor cassettes – joists, rim tracks and deck assembled in the factory – are lifted into place in minutes and give a working platform immediately.

תקנים ודרישות לפי שוק

התקנים שלפיהם World Steel מתכננת, מייצרת ומתעדת מוצר זה – ודרישות הגיאומטריה והעומס העיקריות בכל שוק.

ארצות הברית

  • AISI S100Cold-formed steel structural members
  • AISI S240Cold-formed steel structural framing
  • ASTM A1003 / C955Sheet steel and load-bearing studs
  • IBC Ch. 22Steel – cold-formed framing
Coating
G60 (Z180) minimum for structural framing members
כל תקני United States →

אוסטרליה / ניו זילנד

  • AS/NZS 4600Cold-formed steel structures
  • NASH StandardResidential and low-rise steel framing, Parts 1 & 2
  • AS 1397Steel sheet and strip – G550, Z / AZ coatings
  • NCCBuilding Code of Australia
Corrosion
coating class to NASH / AS 4312 exposure
כל תקני Australia & New Zealand →

אירופה

  • EN 1993-1-3Cold-formed members and sheeting
  • EN 1090-4Execution of cold-formed structural elements
  • EN 10346Continuously hot-dip coated steel – S350GD – S550GD
  • EN 1993-1-1General rules
CE
EN 1090-1 for structural kits
כל תקני Europe →

סיכום להתמצאות בלבד – מפרט הפרויקט, מהדורת התקן שאומצה והרשות המוסמכת הם הקובעים.

גימורים

גימורתקנים / הערות
FrameZ275 / AZ150

הפרויקט הבא

מתכננים מבנה פלדה בחו"ל?

שלחו לנו את השרטוטים או את מודל ה-IFC – צוות התמחור שלנו יחזור אליכם עם היקף הייצור, לוח זמנים ומחיר כולל אספקה.