ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
- Lipped C studs, webs 75 – 150 mm
- U tracks to suit every stud
- 0.75 – 1.6 mm BMT, G550 / G450 / G300
- Z275, AZ150 or Z450 coatings
- Service holes, dimples, bolt holes punched in-line
- Every member labelled for its panel
What it is
Studs and tracks are the building blocks of light gauge steel framing. Lipped C studs carry the vertical loads in walls and form truss chords and noggings; U tracks hold the studs top and bottom. Produced on CNC roll-forming lines straight from the 3D model, each member is cut to length, punched and printed with its position.
Sizes
| Profile | Web (mm) | Flange (mm) | Lip (mm) | BMT (mm) | Use |
|---|---|---|---|---|---|
| C 75 | 75 | 35 – 41 | 8 – 10 | 0.75 – 1.0 | Partitions, light walls |
| C 89 | 89 | 41 | 11 | 0.75 – 1.15 | Houses – load-bearing walls, trusses |
| C 92 / 100 | 92 – 100 | 41 – 45 | 10 – 12 | 0.95 – 1.2 | Walls, floor framing |
| C 140 / 150 | 140 – 150 | 41 – 50 | 12 – 15 | 1.0 – 1.6 | Taller walls, mid-rise, joists |
| U track | to suit stud | 32 – 50 | – | 0.75 – 1.15 | Top and bottom plates |
Steel and coating
| Market | Steel | Coating |
|---|---|---|
| Australia / NZ | G550 / G450 / G300 (AS 1397) | Z275, AZ150, Z450 |
| United States | ASTM A1003 ST50H / ST33H | G60, G90 |
| Europe | S350GD – S550GD (EN 10346) | Z275, ZM |
High-strength G550 steel lets thin members carry high loads; heavier coatings are chosen for humid, coastal or ventilated roof spaces.
תקנים ודרישות לפי שוק
התקנים שלפיהם World Steel מתכננת, מייצרת ומתעדת מוצר זה – ודרישות הגיאומטריה והעומס העיקריות בכל שוק.
ארצות הברית
- AISI S100Cold-formed steel structural members
- AISI S240Cold-formed steel structural framing
- ASTM A1003 / C955Sheet steel and load-bearing studs
- IBC Ch. 22Steel – cold-formed framing
- Coating
- G60 (Z180) minimum for structural framing members
אוסטרליה / ניו זילנד
- AS/NZS 4600Cold-formed steel structures
- NASH StandardResidential and low-rise steel framing, Parts 1 & 2
- AS 1397Steel sheet and strip – G550, Z / AZ coatings
- NCCBuilding Code of Australia
- Corrosion
- coating class to NASH / AS 4312 exposure
אירופה
- EN 1993-1-3Cold-formed members and sheeting
- EN 1090-4Execution of cold-formed structural elements
- EN 10346Continuously hot-dip coated steel – S350GD – S550GD
- EN 1993-1-1General rules
- CE
- EN 1090-1 for structural kits
סיכום להתמצאות בלבד – מפרט הפרויקט, מהדורת התקן שאומצה והרשות המוסמכת הם הקובעים.
גימורים
| גימור | תקנים / הערות |
|---|---|
| Galvanized | Z275 (275 g/m²) |
| Zn-Al | AZ150 |
| Heavy | Z450 for exposed / coastal |
