ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
- Standard sizes C80 to C300
- Thickness 1.2–3.0 mm
- Auto-size line: H 100–400, W 50–130, T 1.2–4.0 mm
- Pre-punched oval holes 14 × 22 mm
Light, straight and pre-punched
C sections are roll-formed from galvanized coil and used as purlins, girts, eave struts and light framing. They are cut to length and punched to the connection layout in-line, so members arrive ready to bolt. Simple spans and short projects use C sections; continuous lapped systems usually use Z purlins.
Standard sizes (mm)
| No. | Type | H | W | L | T | K (holes) |
|---|---|---|---|---|---|---|
| 1 | C80 | 80 | 40 | 16–20 | 1.2–3.0 | – |
| 2 | C100 | 100 | 50 | 16–20 | 1.2–3.0 | 40–50 |
| 3 | C125 | 125 | 50 | 16–20 | 1.2–3.0 | 40–60 |
| 4 | C150 | 150 | 50 | 16–20 | 1.2–3.0 | 40–80 |
| 5 | C180 | 180 | 50 | 16–20 | 1.5–3.0 | 40–100 |
| 6 | C200 | 180 | 50 | 16–20 | 1.5–3.0 | 40–120 |
| 7 | C150 | 150 | 65 | 16–20 | 1.5–3.0 | 40–80 |
| 8 | C180 | 180 | 65 | 16–20 | 1.5–3.0 | 40–100 |
| 9 | C200 | 200 | 65 | 16–20 | 1.5–3.0 | 40–120 |
| 10 | C250 | 250 | 65 | 16–20 | 1.5–3.0 | 40–160 |
| 11 | C300 | 300 | 65 | 16–20 | 1.5–3.0 | 40–210 |
| 12 | C200 | 200 | 75 | 16–20 | 1.5–3.0 | 40–120 |
| 13 | C250 | 250 | 75 | 16–20 | 1.5–3.0 | 40–160 |
| 14 | C300 | 300 | 75 | 16–20 | 1.5–3.0 | 40–210 |
Auto-size C line: H 100–400 mm, W 50–130 mm, L 15–25 mm, T 1.2–4.0 mm, K 40–320 mm. Standard holes: oval 14 × 22 mm.
תקנים ודרישות לפי שוק
התקנים שלפיהם World Steel מתכננת, מייצרת ומתעדת מוצר זה – ודרישות הגיאומטריה והעומס העיקריות בכל שוק.
ארצות הברית
- AISI S100Cold-formed steel structural members
- ASTM A653 / A1011Galvanized / hot-rolled sheet for purlins
- MBMA ManualMetal building systems practice
אוסטרליה / ניו זילנד
- AS/NZS 4600Cold-formed steel structures
- AS 1397G450 / G550 metallic-coated sheet
- AS/NZS 5131 הסמכת WSCFabrication and erection
אירופה
- EN 1993-1-3Cold-formed members and sheeting
- EN 10346S350GD / S450GD + Z coated steel
- EN 1090-4Cold-formed structural steel elements
סיכום להתמצאות בלבד – מפרט הפרויקט, מהדורת התקן שאומצה והרשות המוסמכת הם הקובעים.
גימורים
| גימור | תקנים / הערות |
|---|---|
| Galvanized | Z180–Z350 (G60–G90) per environment |
| Primed | On request for black-steel purlins |
שאלות נפוצות
What is the maximum C purlin depth?
Standard sizes go to C300; the auto-size line rolls any depth from 100 to 400 mm and flange widths from 50 to 130 mm.
Can holes be punched to our layout?
Yes – holes are punched in-line to the connection layout from the shop drawings.
IAS AC472
AS/NZS 5131 CC3