ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
Europe
- M12 and M16, class 4.6 or 8.8
- Hot-dip galvanized, matching nuts and washers
- Lengths for single, lapped and sleeved purlins
- Packed per building, per bay
- Flange-brace and bridging bolts included
- Matched to C / Z purlin hole patterns
What it is
Purlins and girts are connected to rafter and column cleats with small bolts – usually M12 for light sections and M16 for heavier purlins and laps. Every steel building uses thousands of them, so getting the count, length and finish right saves days on site.
World Steel calculates the bolt list from the 3D model and packs purlin bolts by building and by bay, together with the C and Z purlins.
Typical bolts
| Use | Bolt | Notes |
|---|---|---|
| Purlin / girt to cleat | M12 × 30 – 35, class 4.6 | one or two plies |
| Lapped Z purlins | M12 / M16 × 40 – 45 | three plies at the lap |
| Heavy purlins, eave struts | M16 × 40 – 50, class 8.8 | per design |
| Flange braces, sag rods | M12 × 30 | bracing to purlin flange |
| Bridging | M12 × 30 – 40 | bridging bracket to web |
Finish
Hot-dip galvanized bolts, nuts and washers match the Z275 – Z450 galvanizing of the purlins, so the connection does not become the first point of corrosion.
Normes et exigences par marché
Les codes selon lesquels World Steel conçoit, fabrique et documente ce produit – et les principales exigences géométriques et de charge sur chaque marché.
Australie / NZ
- AS 1111.1Commercial bolts 4.6
- AS 4600Cold-formed steel structures
États-Unis
- ASTM A307Carbon steel bolts
- AISI S100Cold-formed steel design
Synthèse fournie à titre indicatif – le cahier des charges du projet, l'édition du code adoptée et l'autorité compétente prévalent.
Finitions
| Finition | Normes / remarques |
|---|---|
| Hot-dip galvanized | ISO 10684 / AS 1214 |
