ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
미국
유럽
- M12 and M16, class 4.6 or 8.8
- Hot-dip galvanized, matching nuts and washers
- Lengths for single, lapped and sleeved purlins
- Packed per building, per bay
- Flange-brace and bridging bolts included
- Matched to C / Z purlin hole patterns
What it is
Purlins and girts are connected to rafter and column cleats with small bolts – usually M12 for light sections and M16 for heavier purlins and laps. Every steel building uses thousands of them, so getting the count, length and finish right saves days on site.
World Steel calculates the bolt list from the 3D model and packs purlin bolts by building and by bay, together with the C and Z purlins.
Typical bolts
| Use | Bolt | Notes |
|---|---|---|
| Purlin / girt to cleat | M12 × 30 – 35, class 4.6 | one or two plies |
| Lapped Z purlins | M12 / M16 × 40 – 45 | three plies at the lap |
| Heavy purlins, eave struts | M16 × 40 – 50, class 8.8 | per design |
| Flange braces, sag rods | M12 × 30 | bracing to purlin flange |
| Bridging | M12 × 30 – 40 | bridging bracket to web |
Finish
Hot-dip galvanized bolts, nuts and washers match the Z275 – Z450 galvanizing of the purlins, so the connection does not become the first point of corrosion.
시장별 표준 및 요구사항
World Steel이 본 제품의 설계, 제작, 문서화에 적용하는 기준 – 그리고 각 시장의 주요 형상 및 하중 요구사항.
호주 / 뉴질랜드
- AS 1111.1Commercial bolts 4.6
- AS 4600Cold-formed steel structures
참고용 요약입니다 – 프로젝트 시방서, 채택된 기준 판본 및 관할 기관의 요구가 우선합니다.
표면 처리
| 표면 처리 | 표준 / 비고 |
|---|---|
| Hot-dip galvanized | ISO 10684 / AS 1214 |
