ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
Europa
- M12 and M16, class 4.6 or 8.8
- Hot-dip galvanized, matching nuts and washers
- Lengths for single, lapped and sleeved purlins
- Packed per building, per bay
- Flange-brace and bridging bolts included
- Matched to C / Z purlin hole patterns
What it is
Purlins and girts are connected to rafter and column cleats with small bolts – usually M12 for light sections and M16 for heavier purlins and laps. Every steel building uses thousands of them, so getting the count, length and finish right saves days on site.
World Steel calculates the bolt list from the 3D model and packs purlin bolts by building and by bay, together with the C and Z purlins.
Typical bolts
| Use | Bolt | Notes |
|---|---|---|
| Purlin / girt to cleat | M12 × 30 – 35, class 4.6 | one or two plies |
| Lapped Z purlins | M12 / M16 × 40 – 45 | three plies at the lap |
| Heavy purlins, eave struts | M16 × 40 – 50, class 8.8 | per design |
| Flange braces, sag rods | M12 × 30 | bracing to purlin flange |
| Bridging | M12 × 30 – 40 | bridging bracket to web |
Finish
Hot-dip galvanized bolts, nuts and washers match the Z275 – Z450 galvanizing of the purlins, so the connection does not become the first point of corrosion.
Normas e requisitos por mercado
Normas segundo as quais a World Steel projeta, fabrica e documenta este produto – e os principais requisitos geométricos e de carga em cada mercado.
Austrália / NZ
- AS 1111.1Commercial bolts 4.6
- AS 4600Cold-formed steel structures
Estados Unidos
- ASTM A307Carbon steel bolts
- AISI S100Cold-formed steel design
Resumo apenas para orientação – prevalecem a especificação do projeto, a edição da norma adotada e a autoridade competente.
Acabamentos
| Acabamento | Normas / observações |
|---|---|
| Hot-dip galvanized | ISO 10684 / AS 1214 |
