Construindo confiança, garantindo o sucesso Portal do cliente dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success

Structural bolts & fasteners

Nuts, washers & direct tension indicators

Heavy hex nuts (A563, A194 2H, ISO 4032, EN 14399), hardened and plate washers, bevel washers and direct tension indicators F959 / EN 14399-9.

Estados UnidosEuropaAustrália / NZ

Solicitar cotação Especificações

  • Heavy hex nuts A563 DH, A194 2H, ISO 4032, EN 14399
  • Hardened washers F436, EN 14399-6
  • Square plate washers for anchor bolts
  • Bevel washers for tapered flanges
  • DTIs ASTM F959, EN 14399-9
  • Matched lots, galvanized or plain

The rest of the assembly

A bolt is only as good as its nut and washer. Structural nuts must be strong enough to develop the bolt, washers must be hardened where they sit under the turned element, and galvanized nuts must be tapped oversize and lubricated so the assembly can reach its tension.

Range

Nuts and washers
ItemStandardUse
Heavy hex nutASTM A563 DH / C, A194 2HF3125 bolts, F1554 anchors
Hex nut class 8 / 10ISO 4032, EN 14399-3 / -4Metric structural bolts
Hardened washerASTM F436, EN 14399-5 / -6Under the turned element
Plate washerAISC Design Guide 1 sizesAnchor bolts in oversize base plate holes
Bevel washerASTM F436 bevelled, ISO 7091Tapered channel and beam flanges
DTIASTM F959, EN 14399-9Verifying pretension

Direct tension indicators

A DTI is a hardened washer with raised protrusions. As the bolt is tensioned the protrusions flatten; when a feeler gauge is refused in the specified number of gaps, the bolt has reached its minimum pretension. Squirter DTIs show coloured silicone when compressed.

Normas e requisitos por mercado

Normas segundo as quais a World Steel projeta, fabrica e documenta este produto – e os principais requisitos geométricos e de carga em cada mercado.

Estados Unidos

  • ASTM A563 / A194Nuts
  • ASTM F436Hardened washers
  • ASTM F959Direct tension indicators
Todas as normas United States →

Europa

  • EN 14399-5 / -6Washers
  • EN 14399-9DTIs for preloaded bolts
Todas as normas Europe →

Austrália / NZ

  • AS/NZS 1252.1Nuts and washers in the assembly
Todas as normas Australia & New Zealand →

Resumo apenas para orientação – prevalecem a especificação do projeto, a edição da norma adotada e a autoridade competente.

Acabamentos

AcabamentoNormas / observações
Hot-dip galvanizedASTM F2329 · ISO 10684 · AS/NZS 1214 – nuts tapped oversize and lubricated
Plain / blackOiled, for painted or indoor connections

Próximo projeto

Planejando uma estrutura metálica no exterior?

Envie seus desenhos ou modelo IFC – nossa equipe de orçamentos responde com o escopo de fabricação, o cronograma e o preço entregue.