본문 바로가기

Purlins & girts

WS Z purlins and girts

WS cold-formed Z purlins Z125–Z300 with unequal flanges for lapping and continuity, 1.2–3.0 mm galvanized – auto-size line from 100 to 400 mm deep.

미국 호주 / 뉴질랜드 유럽

견적 요청 사양

Galvanized cold-formed Z purlins of several sizes

Z purlins – detail

Z purlins – view

Z purlins

Standard sizes Z125 to Z300
Unequal flanges E / F nest for laps
Lip angle 95–115°
Auto-size line: H 100–400, T 1.2–4.0 mm
Oval holes 14 × 22 or 16 × 24 mm

Built for continuous roofs

Z sections have one wider and one narrower flange so two sections nest into each other at laps over the rafters. Lapped Z purlins act as continuous beams – lighter purlins for the same span, the standard secondary system for pre-engineered buildings.

C and Z purlin section dimensions — Section parameters H, E, F, L, lip angle and hole centres K.

Standard sizes (mm)

WS Z purlins – standard sizes
No.	Type	H	E	F	L	T	Lip angle	K (holes)
1	Z125	125	52	58	16–20	1.2–3.0	95–115	50–55
2	Z150	150	52	58	16–20	1.2–3.0	95–115	50–80
3	Z175	175	52	58	16–20	1.5–3.0	95–115	50–90
4	Z200	200	52	58	16–20	1.5–3.0	95–115	50–120
5	Z175	175	62	68	16–20	1.5–3.0	95–115	50–90
6	Z200	200	62	68	16–20	1.5–3.0	95–115	50–120
7	Z250	250	62	68	16–20	1.5–3.0	95–115	50–160
8	Z200	200	72	78	16–20	1.5–3.0	95–115	50–120
9	Z250	250	72	78	16–20	1.5–3.0	95–115	50–160
10	Z300	300	72	78	16–20	1.5–3.0	95–115	50–210

Auto-size Z line: H 100–400 mm, E / F 50–130 mm, L 15–25 mm, T 1.2–4.0 mm, lip 95–115°, K 40–320 mm. Holes: oval 14 × 22 mm or 16 × 24 mm.

시장별 표준 및 요구사항

World Steel이 본 제품의 설계, 제작, 문서화에 적용하는 기준 – 그리고 각 시장의 주요 형상 및 하중 요구사항.

미국

AISI S100Cold-formed steel structural members
ASTM A653 / A1011Galvanized / hot-rolled sheet for purlins
MBMA ManualMetal building systems practice

United States 표준 전체 →

호주 / 뉴질랜드

AS/NZS 4600Cold-formed steel structures
AS 1397G450 / G550 metallic-coated sheet
AS/NZS 5131 WSC 인증 보유Fabrication and erection

Australia & New Zealand 표준 전체 →

유럽

EN 1993-1-3Cold-formed members and sheeting
EN 10346S350GD / S450GD + Z coated steel
EN 1090-4Cold-formed structural steel elements

Europe 표준 전체 →

참고용 요약입니다 – 프로젝트 시방서, 채택된 기준 판본 및 관할 기관의 요구가 우선합니다.

표면 처리

표면 처리	표준 / 비고
Galvanized	Z180–Z350 (G60–G90) per environment

자주 묻는 질문

Why use Z instead of C purlins?

Z purlins can be lapped over rafters to act as continuous beams, which usually saves weight on multi-bay roofs.

사양

Sizes: Z125–Z300 standard; H 100–400 auto-size
Thickness: 1.2–3.0 mm (auto-size to 4.0 mm)
Flanges: E 52–72 / F 58–78 mm
Lip: 16–20 mm at 95–115°
Holes: Oval 14 × 22 or 16 × 24 mm

인증된 제작

IAS AC472인증서 번호 MB-268International Accreditation Service (IAS)유효기간 1 Aug 2027

AS/NZS 5131 CC3인증서 번호 BMP 827566BSI Group Australia & New Zealand (Benchmark Product Certification)유효기간 31 Jul 2030

제공 문서

Coil mill certificates
Cutting and punching list
Packing list with member marks

견적 요청 시 다음 자료를 보내주십시오

Purlin layout with lap lengths
Section size, thickness, length and hole positions
Coating requirement

인도 조건

FCAFree Carrier FOBFree On Board CFRCost and Freight CIFCost, Insurance and Freight CPTCarriage Paid To CIPCarriage and Insurance Paid To

호찌민시 기준 Incoterms® 2020으로 견적 – 기타 조건은 프로젝트별.

Incoterms® 2020 전체 11가지 규칙 →

Purlins & girts

다음 프로젝트

해외 철골 구조물을 계획 중이십니까?

도면 또는 IFC 모델을 보내주십시오. 견적팀이 제작 범위, 일정 및 인도 가격을 회신해 드립니다.

견적 요청 +84 902 881 833