Bâtir la confiance, garantir le succès Portail client
dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success

Anchor bolts & chemical anchors

Metric anchor bolts – L, J, headed & hammer-head

Cast-in metric anchor bolts M16 – M64, class 4.6, 5.6 or 8.8 (ISO 898-1 / AS 1111) – L, J, headed, straight and hammer-head types, galvanized or plain.

Australie / NZEuropeÉtats-Unis

Demander un devis Caractéristiques

L, J, headed and straight metric anchor bolts
Bent anchor bolt hooks and headed anchorsHooks bent cold to a controlled radius.
  • M16 – M64, class 4.6 / 5.6 / 8.8
  • L, J, headed, straight with plate
  • Hammer-head for anchor channels
  • Rolled or cut threads, any projection
  • Hot-dip galvanized or plain
  • Supplied with nuts, washers and templates

Range

Metric anchor bolt sizes
SizePitchAs (mm²)4.6 ultimate8.8 ultimateTypical use
M162.015763 kN126 kNCanopies, light frames
M202.524598 kN203 kNPortal frame pinned bases
M243.0353141 kN293 kNPortal frames, mezzanines
M303.5561224 kN466 kNFixed bases, crane columns
M364.0817327 kN678 kNHeavy frames, towers
M42 – M644.5 – 6.01120 – 2680448 – 1072 kN930 – 2224 kNEquipment, silos, tall columns

Ultimate tensile loads As × fu are shown for selection only – anchor design checks steel, pull-out and concrete failure.

Types

L and J bolts rely on the bend for anchorage and suit pinned bases; headed bolts – with a hex nut and plate washer at the bottom – carry higher tension through bearing on the concrete. Straight rods with an embedded plate are used for tall piers; hammer-head bolts fit cast-in anchor channels.

Cast-in anchor bolt types
The shape at the bottom carries the tension.

Fabricated in our plant

Anchor bolts are cut, threaded, bent and galvanized with the column steel, so the bolt pattern, projection and base plate holes come from the same model. Threads are protected with tape or caps for shipping.

Normes et exigences par marché

Les codes selon lesquels World Steel conçoit, fabrique et documente ce produit – et les principales exigences géométriques et de charge sur chaque marché.

Australie / NZ

  • AS 1111.1Commercial bolts 4.6
  • AS 4100Steel structures – anchor bolts
  • AS 5216Fastenings in concrete
Toutes les normes Australia & New Zealand →

Europe

  • EN ISO 898-1Property classes
  • EN 1992-4Fastenings in concrete
  • EN 1993-1-8Anchor bolts in base joints
Toutes les normes Europe →

États-Unis

  • ASTM F1554US equivalent
Toutes les normes United States →

Synthèse fournie à titre indicatif – le cahier des charges du projet, l'édition du code adoptée et l'autorité compétente prévalent.

Finitions

FinitionNormes / remarques
Hot-dip galvanizedISO 10684 / AS 1214
Plain / blackOiled, for painted or indoor connections

Contenus associés

Produits en acier

Bundle of galvanized threaded rods with a stud bolt and nutBolts & fastenersThreaded rodsL, headed and J anchor rods with colour-coded endsAnchor bolts & anchorsF1554 anchor rodsAnchor bolt cage with top template, bottom plate and sleevesAnchor bolts & anchorsAnchor bolt cages

Connaissances PEB

Anchor bolts with template set in a foundation below a PEB base plateWSC productsAnchor bolts & embedsColumn base plate with four anchor bolts, levelling nuts and grout on a concrete footingComponentsBase plates & anchor boltsConcrete footing with cast-in anchor bolts under a PEB column baseComponentsFoundations interface
ProduitsPrimary framing
SolutionsBolts & anchor bolts
SecteursIndustrial
Normes et certificationsAustralia & New ZealandEurope

Projets de référence

Prochain projet

Un projet de structure métallique à l'étranger ?

Envoyez-nous vos plans ou votre maquette IFC – notre équipe de chiffrage vous répond avec le périmètre de fabrication, le planning et le prix rendu chantier.

Demander un devis +84 902 881 833