ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
Prodotti in acciaio
WS steel grating & floor plate
World Steel's flagship grating range: WS bar grating 20×3 to 150×8 mm in 30, 40 and 60 mm meshes, load and span tables, heavy-duty, serrated and stainless grating, stair treads T1–T6, GT/GU trench covers, GM pit covers, clips and checkered plate – galvanised and cut to layout.
14 prodotti
Steel bar grating
Welded and press-locked steel grating, heavy-duty and serrated grating with load and span tables.
Steel gratingSteel bar gratingWS welded bar grating, bars 20×3 to 150×8 mm at 30, 40 or 60 mm pitch – plain or serrated, galvanised and cut to layout for platforms and floors.
Steel gratingLoad & span tablesSafe loads, deflections, weights and recommended spans for WS grating with bars at 30, 40 and 60 mm – the tables used to select every panel.
Steel gratingHeavy-duty gratingWS heavy-duty grating, bars 45×5 to 150×8 mm with 8×8 mm cross bars, for 5–7.5 kPa floors, forklifts, vehicle trenches and heavy equipment.
Steel gratingSerrated gratingWS serrated grating with notched bearing bars for slip resistance in wet, oily, icy and outdoor areas – any WS size and mesh, with published load and deflection factors.
Steel gratingPress-locked gratingPress-locked steel and stainless bar grating with a flush top and tight meshes for walkways, facades and sun screens – galvanised or stainless, for export.Stainless & aluminium grating
Corrosion-resistant grating for food, marine, chemical and architectural use – FRP grating is in the FRP products range.
Steel gratingStainless gratingWS stainless grating in SUS304 and SUS316 for food, pharmaceutical, chemical, water and marine areas – pickled and passivated after welding.
Steel gratingAluminium gratingLightweight aluminium bar grating for marine, wastewater, food and roof walkways – pressure-locked or riveted, supplied with steel frames for export projects.Stair treads & floor plate
Grating stair treads, mesh flooring, checkered and anti-slip composite floor plate.
Steel gratingGrating stair treadsWS grating stair treads T1–T6 – welded or bolted, with no nosing, checker-plate or abrasive anti-slip nosing, in standard widths or to order.
Steel gratingFloor plateCheckered steel floor plate to ASTM A786, AS/NZS 3678 and EN 10025-2 – cut, stiffened, drilled and galvanized or painted for export projects.
Steel gratingMesh flooringGalvanised expanded and welded mesh floor panels in steel edge frames for mezzanines, catwalks and rack walkways – to AS 1657, OSHA and EN ISO 14122-2.
Steel gratingComposite floor plateSteel or aluminium floor plate with a bonded anti-slip grit or FRP surface for solid platforms and walkways – fabricated to layout for AU, US and EU projects.Trench & pit covers
Grating trench covers and pit covers – more grates and access covers in the civil drainage range.
Steel gratingTrench coversWS-GT covers in angle seat frames and WS-GU banded covers for U-channels – trenches 100–600 mm wide, classes T-2 to T-25, galvanised.
Steel gratingDrainage pit coversWS-GM grating covers and bedframes for drainage pits 300 × 400 to 700 × 700 mm in load classes T-2, T-14, T-20 and T-25 – supplied as matched, galvanised sets.Clips & fasteners
Fixing clips, saddle clamps and fasteners for every grating panel.
Realizzati secondo le norme del vostro mercato
Norme e certificazioni →
United StatesHow US codes govern structural steel, metal buildings and steel products – IBC, ASCE 7, AISC, AWS, OSHA – and how World Steel complies via IAS AC472.58 norme →
Australia & New ZealandHow the NCC, NZBC, AS/NZS 5131 and AS 4100 govern steelwork in Australia and NZ, and how World Steel delivers to CC3 with ISO 3834-2 welding.51 norme →
EuropeCE marking under EN 1090-1, EN 1090-2 execution classes and the Eurocodes explained – and how World Steel supplies EXC3 steelwork with a DoP.56 norme →