Saltar al contenido

Conocimiento PEB

Frame systems

Clear-span, multi-span, single-slope, lean-to, multi-gable, crane and mezzanine buildings.

10 artículos

Fundamentals Frame systems Components Design Materials Fabrication Erection Standards Applications WSC products WSC solutions

Clear-span PEB with tapered rigid frames spanning the full building width without interior columns

Frame systemsClear spanClear-span PEB frames explained: typical spans of 12–60 m, roof slopes, eave heights, design limits and when a column-free rigid frame is the right choice.

Wide multi-span PEB with a continuous rafter supported on slender interior columns

Frame systemsMulti-spanMulti-span PEB frames use interior columns to cover very wide buildings economically. Learn typical modules, slopes, column types, limits and applications.

Single-slope PEB with a mono-pitch roof rising from a low sidewall to a high sidewall

Frame systemsSingle slopeSingle-slope PEB frames have a mono-pitch roof draining to one side. Typical spans, slopes, high and low eave heights, uses and design limits explained.

PEB main building with a lower single-slope lean-to attached along one sidewall

Frame systemsLean-toLean-to PEB extensions attach to a main building's sidewall or endwall. Typical widths, slopes, connection types, design checks and common uses explained.

PEB with three gable roofs side by side and valley gutters between them

Frame systemsMulti-gableMulti-gable PEBs place several gable roofs side by side with valley gutters. Learn when to use them, typical spans, drainage design and key limitations.

PEB interior with a top-running overhead bridge crane on runway beams supported by column brackets

Frame systemsCrane buildingsCrane buildings in PEB: overhead crane types, capacities, runway support options, crane loads, deflection limits and when conventional crane columns are needed.

PEB interior with a steel mezzanine floor on columns and beams along one side, with stair and handrail

Frame systemsMezzanine buildingsPEBs with mezzanine floors: layouts, typical live loads, floor deck options, interaction with the main frame, vibration, fire and access requirements.

Compact clear-span steel building with straight columns, a very shallow gable roof and flush-mounted wall girts

Frame systemsSpace saverSpace-saver PEB frames explained: straight columns, low roof slope and flush girts for compact clear-span buildings with minimal volume and simple detailing.

Three-storey steel-framed office building with constant-depth columns and beams, composite floors and a parapet roof

Frame systemsLow-rise buildingsLow-rise multi-storey steel buildings: framing, floors, bracing, fire and vibration checks for 2–4 storey offices and mixed-use blocks built the PEB way.

Steel rafters, purlins and roof sheeting supported on reinforced concrete columns and masonry walls

Frame systemsRoof systemsSteel roof systems on concrete or masonry: rafters, purlins and sheeting on substructures by others – bearings, thrust, anchor bolts and interface tolerances.

Modelo 3D de referencia PEB

IFC · 3DExplore cada componente en 3D Gire, seccione y haga clic en un edificio preingenierizado completo – cada componente enlaza con su artículo.Abrir el modelo 3D →

Próximo proyecto

¿Planea una estructura metálica en el extranjero?

Envíenos sus planos o su modelo IFC – nuestro equipo de presupuestos responde con el alcance de fabricación, el plazo y el precio puesto en destino.

Solicitar cotización +84 902 881 833