POSCO Vietnam

POSCO Vietnam Co., Ltd. is a subsidiary of South Korea's POSCO group, established in 2006. Its cold-rolling mill in the Phu My II Industrial Zone started trial operation in April 2009 with an annual capacity of about 1.2 million tonnes of cold-rolled steel, of which a substantial share was intended for construction materials and the remainder for automotive and motorcycle manufacturing, serving Vietnam and neighbouring countries.

Cold-rolled coil is an intermediate product in the PEB supply chain. Coil coaters and roll formers hot-dip coat cold-rolled strip with zinc or aluminium-zinc alloy and, where required, apply a paint system before roll forming it into roof and wall sheeting, flashings, trims and standing seam panels. Cold-rolled and coated strip is also the starting material for cold-formed Z and C purlins, girts and eave struts. Cold rolling gives closer thickness tolerances and a better surface than hot-rolled strip, which matters for thin-gauge members whose design under AISI S100, AS/NZS 4600 or EN 1993-1-3 depends on the base metal thickness. Fabricators specify the final coated product by its own standard and grade rather than by the cold-rolled feedstock.

PEB 및 철골 구조에 사용되는 제품

• Cold-rolled coil – substrate for metallic-coated and pre-painted roofing and wall sheet
• Cold-rolled strip – feedstock for coated strip used in cold-formed purlins and girts
• Cold-rolled steel for construction materials and general manufacturing

베트남 내

Established in November 2006; cold-rolling mill in Phu My II Industrial Zone, Ba Ria – Vung Tau province, opened in 2009 with a capacity of about 1.2 million tonnes per year.

브랜드명과 상표는 각 소유자에게 귀속됩니다. 브랜드를 게재한 것이 World Steel과의 제휴나 World Steel의 보증을 의미하지 않으며, 자재는 프로젝트별 시방서와 승인된 제출 자료에 따라 선정됩니다.