ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
- EPS core 50–100 mm, density 16–20 kg/m³
- Steel skins both sides, tongue-and-groove joints
- Walls, partitions, ceilings, cold rooms
- PU and rock-wool cores available
Insulated walls in one product
A sandwich panel combines two steel skins and an insulating core into a rigid, self-supporting element. WS EPS panels give fast, clean installation for factory walls, partitions, ceilings, clean rooms and cold rooms; panels interlock along their long edges and are screwed to girts or frames.
Where fire performance or higher insulation is needed, PU / PIR or rock-wool cores are specified – see insulated sandwich panels and cold storage.
Technical data
| Property | Value |
|---|---|
| Density | 16–20 kg/m³ |
| Thermal conductivity | λ = 0.035 kcal/m·h·°C (≈ 0.041 W/m·K) |
| Compressive strength | 3.5 kg/cm² |
| Bending strength | 6.68 kg/cm² |
| Water-vapour absorption coefficient | μ = 710 mg/m²·s (reference value) |
| Service temperature | −40 °C to +80 °C |
| Panel thickness | 50–100 mm |
| Panel width | 1150 mm module (1138 mm core) |
EPS is combustible. Check the fire requirements of the building code and the insurer before specifying EPS – rock-wool or fire-tested PIR cores may be required.
시장별 표준 및 요구사항
World Steel이 본 제품의 설계, 제작, 문서화에 적용하는 기준 – 그리고 각 시장의 주요 형상 및 하중 요구사항.
미국
- ASTM C578Rigid cellular polystyrene thermal insulation
- IBC Chapter 26Foam plastic insulation – fire requirements
- FM 4880Fire tests of insulated wall / ceiling panels (insurer)
호주 / 뉴질랜드
- AS 1366.3Rigid cellular polystyrene
- NCCFire hazard properties of wall and ceiling linings
- AS/NZS 1530Fire tests
유럽
- EN 14509Self-supporting double-skin metal-faced insulating panels
- EN 13163Factory-made EPS products
- EN 13501-1Reaction-to-fire classification
참고용 요약입니다 – 프로젝트 시방서, 채택된 기준 판본 및 관할 기관의 요구가 우선합니다.
표면 처리
| 표면 처리 | 표준 / 비고 |
|---|---|
| Skins | Pre-painted AZ / Z steel |
| Joints | Tongue and groove, screw-fixed or hidden fixing |
자주 묻는 질문
Can EPS panels be used in cold rooms?
Yes for chill rooms within the service temperature range; freezers usually use thicker PU / PIR panels for better insulation and fire performance.
IAS AC472