Solvent-based intumescent coating – illustration

Imagens dos produtos: o fabricante (oficiais).

Thin-film · cellulosic

Solvent-based intumescent coating

A fast-drying, humidity-tolerant thin-film coating – the usual choice for shop-applied fire protection on export projects.

Cellulosic (building)
Fire type: R30 – R120
Typical rating: Interior / sheltered
Exposure

Solicitar cotação

Fornecido pela World Steel com seu edifício metálico ou separadamente – um pedido, um embarque, um parceiro.

Visão geral

Sobre Solvent-based intumescent coating

Dries faster than water-based coatings and tolerates higher humidity during application.

Suited to off-site application in the fabrication shop, followed by careful packing.

Topcoated for semi-exposed and humid interior areas.

Principais benefícios

Fast drying – practical for shop application and tight schedules
Better tolerance of humid climates during application
Robust finish for transport and erection
Thin film keeps steel slim and visible

World Steel · central de envoltória da edificação

Como usamos Solvent-based intumescent coating em edifícios metálicos

World Steel can apply the primer and intumescent coating in our blasting and painting shop, so members arrive at site already fire-protected – thickness per member from the fire engineer's schedule, recorded in the coating report.

01Especificado junto com a estrutura – espessura, densidade e revestimento compatíveis com o projeto da cobertura, das paredes e de proteção contra incêndio.
02Quantitativos extraídos do mesmo modelo 3D que o aço, as terças e o fechamento.
03Embalado e enviado com o pacote de aço – um único cronograma de entrega na obra.

Aplicações

Onde Solvent-based intumescent coating é utilizado

Shop-applied protection of beams and columns
Warehouses, factories and logistics buildings with fire-rated steel
Semi-exposed steel with approved topcoat

Dados técnicos

Solvent-based intumescent coating – propriedades técnicas

Typical properties

Propriedade	Unidade	Valor
Fire curve	—	Standard (cellulosic)
Typical rating range	min	30 – 120
Typical dry film thickness	mm	≈ 0.3 – 3 (member-specific)
Environment	—	Interior and sheltered C2 – C3 with topcoat

Valores conforme publicados pelo fabricante para este mercado. Sempre verifique a ficha técnica atual e as aprovações exigidas para seu projeto antes de fazer o pedido.

Building fires (cellulosic)

Produtos relacionados

Water-based intumescent coating – illustration

Thin-film · cellulosicWater-based intumescent coatingVer produto →

Exterior-grade intumescent systems – illustration

Intumescent · exterior exposureExterior-grade intumescent systemsVer produto →

← Intumescent coatings for cellulosic fires Intumescent Fire Protection Coatings →

FAQ

Perguntas frequentes

What thickness of solvent-based intumescent coating do I need?

It depends on the member size (section factor), the critical temperature and the required fire rating – the fire engineer or the manufacturer's tested data gives a thickness for each member.

Does World Steel supply branded products?

Yes – we supply the brand and listed system your specification or authority requires. This page describes the product type.

Um único parceiro para estrutura e envoltória

Envie-nos seus desenhos ou planilha de quantitativos – cotamos o aço, o isolamento, as placas e os forros em conjunto e os enviamos como um único pacote.

Solicitar cotação +84 902 881 833