Solvent-based intumescent coating – illustration

Immagini dei prodotti: il produttore (ufficiali).

Thin-film · cellulosic

Solvent-based intumescent coating

A fast-drying, humidity-tolerant thin-film coating – the usual choice for shop-applied fire protection on export projects.

Cellulosic (building)
Fire type: R30 – R120
Typical rating: Interior / sheltered
Exposure

Richiedi un preventivo

Fornito da World Steel con il vostro edificio in acciaio o separatamente – un ordine, una spedizione, un partner.

Panoramica

Informazioni su Solvent-based intumescent coating

Dries faster than water-based coatings and tolerates higher humidity during application.

Suited to off-site application in the fabrication shop, followed by careful packing.

Topcoated for semi-exposed and humid interior areas.

Vantaggi principali

Fast drying – practical for shop application and tight schedules
Better tolerance of humid climates during application
Robust finish for transport and erection
Thin film keeps steel slim and visible

World Steel · hub per l'involucro edilizio

Come utilizziamo Solvent-based intumescent coating negli edifici in acciaio

World Steel can apply the primer and intumescent coating in our blasting and painting shop, so members arrive at site already fire-protected – thickness per member from the fire engineer's schedule, recorded in the coating report.

01Specificato insieme alla struttura – spessore, densità e rivestimento adeguati al progetto di copertura, pareti e antincendio.
02Quantità ricavate dallo stesso modello 3D di acciaio, arcarecci e rivestimenti.
03Imballato e spedito con il pacchetto acciaio – un unico programma di consegna in cantiere.

Applicazioni

Dove si usa Solvent-based intumescent coating

Shop-applied protection of beams and columns
Warehouses, factories and logistics buildings with fire-rated steel
Semi-exposed steel with approved topcoat

Dati tecnici

Solvent-based intumescent coating – proprietà tecniche

Typical properties

Proprietà	Unità	Valore
Fire curve	—	Standard (cellulosic)
Typical rating range	min	30 – 120
Typical dry film thickness	mm	≈ 0.3 – 3 (member-specific)
Environment	—	Interior and sheltered C2 – C3 with topcoat

Valori pubblicati dal produttore per questo mercato. Prima dell'ordine verificate sempre la scheda tecnica aggiornata e le approvazioni richieste per il vostro progetto.

Building fires (cellulosic)

Prodotti correlati

Water-based intumescent coating – illustration

Thin-film · cellulosicWater-based intumescent coatingVedi prodotto →

Exterior-grade intumescent systems – illustration

Intumescent · exterior exposureExterior-grade intumescent systemsVedi prodotto →

← Intumescent coatings for cellulosic fires Intumescent Fire Protection Coatings →

FAQ

Domande frequenti

What thickness of solvent-based intumescent coating do I need?

It depends on the member size (section factor), the critical temperature and the required fire rating – the fire engineer or the manufacturer's tested data gives a thickness for each member.

Does World Steel supply branded products?

Yes – we supply the brand and listed system your specification or authority requires. This page describes the product type.

Un unico partner per struttura e involucro

Inviateci i disegni o il computo metrico – quotiamo insieme acciaio, isolamento, lastre e controsoffitti e li spediamo in un unico pacchetto.

Richiedi un preventivo +84 902 881 833