ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
Immagini dei prodotti: il produttore (ufficiali).
Intumescent · exterior exposure
Exterior-grade intumescent systems
Steel outside the building envelope needs an intumescent system proven to keep its fire performance after weathering.
- Exterior / semi-exposed
- Exposure
- EAD 350402 type X or Y
- Durability
- Primer + intumescent + topcoat
- System
Fornito da World Steel con il vostro edificio in acciaio o separatamente – un ordine, una spedizione, un partner.
Panoramica
Informazioni su Exterior-grade intumescent systems
The European assessment document EAD 350402 classifies reactive coatings for durability: type X for all conditions including exterior, type Y for internal and semi-exposed, Z1 and Z2 for internal conditions; EN 16623 sets durability requirements as well.
Exterior systems are usually solvent-based or epoxy intumescents with a compatible sealer or topcoat; the whole system – primer, basecoat and topcoat – is what was tested.
Corrosion protection of the steel underneath follows ISO 12944 for the environment.
Vantaggi principali
- Proven fire performance after weathering
- Protects exposed steel and canopies
- Works with ISO 12944 corrosion systems
- Shop or site application
World Steel · hub per l'involucro edilizio
Come utilizziamo Exterior-grade intumescent systems negli edifici in acciaio
World Steel specifies the full coating system from blast cleaning to topcoat and applies it in the shop where practical.
Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.
- 01Specificato insieme alla struttura – spessore, densità e rivestimento adeguati al progetto di copertura, pareti e antincendio.
- 02Quantità ricavate dallo stesso modello 3D di acciaio, arcarecci e rivestimenti.
- 03Imballato e spedito con il pacchetto acciaio – un unico programma di consegna in cantiere.
Applicazioni
Dove si usa Exterior-grade intumescent systems
- External steel frames and canopies
- Open car parks and walkways
- Semi-exposed industrial structures
Dati tecnici
Exterior-grade intumescent systems – proprietà tecniche
Typical properties and standards
| Proprietà | Unità | Valore |
|---|---|---|
| Durability | — | EAD 350402 types X / Y / Z1 / Z2 · EN 16623 |
| Fire test | — | EN 13381-8 · UL 263 · BS 476-20/21 · AS 1530.4 |
| Corrosion | — | ISO 12944 primer and topcoat compatible with the intumescent |
Valori pubblicati dal produttore per questo mercato. Prima dell'ordine verificate sempre la scheda tecnica aggiornata e le approvazioni richieste per il vostro progetto.
FAQ
Domande frequenti
Can an interior intumescent be used outside with a topcoat?
Only if that complete system has been tested for exterior durability – otherwise choose an exterior-qualified system.
Is this product certified?
Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.
Un unico partner per struttura e involucro
Inviateci i disegni o il computo metrico – quotiamo insieme acciaio, isolamento, lastre e controsoffitti e li spediamo in un unico pacchetto.