Water-based intumescent coating – illustration

Immagini dei prodotti: il produttore (ufficiali).

Thin-film · cellulosic

Water-based intumescent coating

A low-odour, water-borne thin-film coating for steel in dry interiors – offices, schools, shopping centres and car parks with a protective topcoat.

Cellulosic (building)
Fire type: R30 – R120
Typical rating: Interior, dry
Exposure

Richiedi un preventivo

Fornito da World Steel con il vostro edificio in acciaio o separatamente – un ordine, una spedizione, un partner.

Panoramica

Informazioni su Water-based intumescent coating

Applied like paint by airless spray, brush or roller over a compatible primer.

In a fire the coating expands into a thick insulating char that slows heating of the steel.

Thickness is set per member from the section factor, the critical temperature and the required rating.

Vantaggi principali

Slim, architectural finish – the shape of the steel stays visible
Low VOC and low odour for occupied buildings
Can be applied in the shop, so steel arrives protected
Decorative topcoat in any colour

World Steel · hub per l'involucro edilizio

Come utilizziamo Water-based intumescent coating negli edifici in acciaio

World Steel can apply the primer and intumescent coating in our blasting and painting shop, so members arrive at site already fire-protected – thickness per member from the fire engineer's schedule, recorded in the coating report.

01Specificato insieme alla struttura – spessore, densità e rivestimento adeguati al progetto di copertura, pareti e antincendio.
02Quantità ricavate dallo stesso modello 3D di acciaio, arcarecci e rivestimenti.
03Imballato e spedito con il pacchetto acciaio – un unico programma di consegna in cantiere.

Applicazioni

Dove si usa Water-based intumescent coating

Exposed steel in atriums, lobbies and façades behind glass
Office, retail and education buildings
Car parks with suitable topcoat

Dati tecnici

Water-based intumescent coating – proprietà tecniche

Typical properties

Proprietà	Unità	Valore
Fire curve	—	Standard (cellulosic) – ISO 834 / ASTM E119 / AS 1530.4
Typical rating range	min	30 – 120
Typical dry film thickness	mm	≈ 0.3 – 3 (member-specific)
Environment	—	Interior C1 – C2; C3 with approved topcoat

Valori pubblicati dal produttore per questo mercato. Prima dell'ordine verificate sempre la scheda tecnica aggiornata e le approvazioni richieste per il vostro progetto.

Building fires (cellulosic)

Prodotti correlati

Solvent-based intumescent coating – illustration

Thin-film · cellulosicSolvent-based intumescent coatingVedi prodotto →

Exterior-grade intumescent systems – illustration

Intumescent · exterior exposureExterior-grade intumescent systemsVedi prodotto →

← Intumescent coatings for cellulosic fires Intumescent Fire Protection Coatings →

FAQ

Domande frequenti

What thickness of water-based intumescent coating do I need?

It depends on the member size (section factor), the critical temperature and the required fire rating – the fire engineer or the manufacturer's tested data gives a thickness for each member.

Does World Steel supply branded products?

Yes – we supply the brand and listed system your specification or authority requires. This page describes the product type.

Un unico partner per struttura e involucro

Inviateci i disegni o il computo metrico – quotiamo insieme acciaio, isolamento, lastre e controsoffitti e li spediamo in un unico pacchetto.

Richiedi un preventivo +84 902 881 833