ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
제품 이미지: 제조사(공식).
Thin-film · cellulosic
Water-based intumescent coating
A low-odour, water-borne thin-film coating for steel in dry interiors – offices, schools, shopping centres and car parks with a protective topcoat.
- Cellulosic (building)
- Fire type
- R30 – R120
- Typical rating
- Interior, dry
- Exposure
World Steel이 철골 건축물과 함께 또는 단독으로 공급 – 하나의 주문, 하나의 선적, 하나의 파트너.
개요
Water-based intumescent coating 소개
Applied like paint by airless spray, brush or roller over a compatible primer.
In a fire the coating expands into a thick insulating char that slows heating of the steel.
Thickness is set per member from the section factor, the critical temperature and the required rating.
주요 장점
- Slim, architectural finish – the shape of the steel stays visible
- Low VOC and low odour for occupied buildings
- Can be applied in the shop, so steel arrives protected
- Decorative topcoat in any colour
World Steel · 건물 외피 허브
철골 건축물에서의 Water-based intumescent coating 활용 방식
World Steel can apply the primer and intumescent coating in our blasting and painting shop, so members arrive at site already fire-protected – thickness per member from the fire engineer's schedule, recorded in the coating report.
- 01구조물과 함께 사양 결정 – 두께, 밀도, 면재를 지붕, 벽 및 내화 설계에 맞춥니다.
- 02철골, 퍼린, 외장재와 동일한 3D 모델에서 물량을 산출합니다.
- 03철골 패키지와 함께 포장·선적 – 현장까지 하나의 납품 일정.
용도
Water-based intumescent coating의 사용처
- Exposed steel in atriums, lobbies and façades behind glass
- Office, retail and education buildings
- Car parks with suitable topcoat
기술 데이터
Water-based intumescent coating – 기술 특성
Typical properties
| 특성 | 단위 | 값 |
|---|---|---|
| Fire curve | — | Standard (cellulosic) – ISO 834 / ASTM E119 / AS 1530.4 |
| Typical rating range | min | 30 – 120 |
| Typical dry film thickness | mm | ≈ 0.3 – 3 (member-specific) |
| Environment | — | Interior C1 – C2; C3 with approved topcoat |
해당 시장용으로 제조사가 공개한 값입니다. 주문 전 항상 최신 데이터 시트와 프로젝트에 필요한 승인 사항을 확인하세요.
FAQ
자주 묻는 질문
What thickness of water-based intumescent coating do I need?
It depends on the member size (section factor), the critical temperature and the required fire rating – the fire engineer or the manufacturer's tested data gives a thickness for each member.
Does World Steel supply branded products?
Yes – we supply the brand and listed system your specification or authority requires. This page describes the product type.
구조와 외피를 위한 하나의 파트너
도면 또는 물량 내역서를 보내주시면 철골, 단열재, 보드, 천장재를 함께 견적하여 하나의 패키지로 선적합니다.