ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
제품 이미지: 제조사(공식).
Thin-film · cellulosic
Solvent-based intumescent coating
A fast-drying, humidity-tolerant thin-film coating – the usual choice for shop-applied fire protection on export projects.
- Cellulosic (building)
- Fire type
- R30 – R120
- Typical rating
- Interior / sheltered
- Exposure
World Steel이 철골 건축물과 함께 또는 단독으로 공급 – 하나의 주문, 하나의 선적, 하나의 파트너.
개요
Solvent-based intumescent coating 소개
Dries faster than water-based coatings and tolerates higher humidity during application.
Suited to off-site application in the fabrication shop, followed by careful packing.
Topcoated for semi-exposed and humid interior areas.
주요 장점
- Fast drying – practical for shop application and tight schedules
- Better tolerance of humid climates during application
- Robust finish for transport and erection
- Thin film keeps steel slim and visible
World Steel · 건물 외피 허브
철골 건축물에서의 Solvent-based intumescent coating 활용 방식
World Steel can apply the primer and intumescent coating in our blasting and painting shop, so members arrive at site already fire-protected – thickness per member from the fire engineer's schedule, recorded in the coating report.
- 01구조물과 함께 사양 결정 – 두께, 밀도, 면재를 지붕, 벽 및 내화 설계에 맞춥니다.
- 02철골, 퍼린, 외장재와 동일한 3D 모델에서 물량을 산출합니다.
- 03철골 패키지와 함께 포장·선적 – 현장까지 하나의 납품 일정.
용도
Solvent-based intumescent coating의 사용처
- Shop-applied protection of beams and columns
- Warehouses, factories and logistics buildings with fire-rated steel
- Semi-exposed steel with approved topcoat
기술 데이터
Solvent-based intumescent coating – 기술 특성
Typical properties
| 특성 | 단위 | 값 |
|---|---|---|
| Fire curve | — | Standard (cellulosic) |
| Typical rating range | min | 30 – 120 |
| Typical dry film thickness | mm | ≈ 0.3 – 3 (member-specific) |
| Environment | — | Interior and sheltered C2 – C3 with topcoat |
해당 시장용으로 제조사가 공개한 값입니다. 주문 전 항상 최신 데이터 시트와 프로젝트에 필요한 승인 사항을 확인하세요.
FAQ
자주 묻는 질문
What thickness of solvent-based intumescent coating do I need?
It depends on the member size (section factor), the critical temperature and the required fire rating – the fire engineer or the manufacturer's tested data gives a thickness for each member.
Does World Steel supply branded products?
Yes – we supply the brand and listed system your specification or authority requires. This page describes the product type.
구조와 외피를 위한 하나의 파트너
도면 또는 물량 내역서를 보내주시면 철골, 단열재, 보드, 천장재를 함께 견적하여 하나의 패키지로 선적합니다.