ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
Imágenes de productos: el fabricante (oficiales).
Boards · encasement systems
Steel encasement systems
Box encasement turns a steel member into a clean, square, fire-protected element – the details are as important as the board.
- Board + fixings + joints
- System
- Columns, beams, bracing
- Members
- Per tested system
- Rating
Suministrado por World Steel con su edificio de acero o por separado – un pedido, un envío, un socio.
Resumen
Acerca de Steel encasement systems
A box encasement is built from fire boards fixed to noggins, steel angles or directly to each other around the section; the tested system defines board thickness, fixing spacing and joint treatment.
Boxed protection is sized using the boxed section factor (heated perimeter of the box) under EN 13381-4, BS 476-21 or ASTM E119 data.
Penetrations and connections to walls and slabs need tested details or firestop products.
Ventajas principales
- Clean, square architectural finish
- Dry, low-mess installation
- Long ratings achievable
- Inspectable thickness
World Steel · centro de envolvente del edificio
Cómo utilizamos Steel encasement systems en edificios de acero
World Steel provides member schedules with boxed section factors and coordinates encasement details with the structure.
Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.
- 01Especificado junto con la estructura – espesor, densidad y revestimiento adaptados al diseño de cubierta, fachada y protección contra incendios.
- 02Cantidades obtenidas del mismo modelo 3D que el acero, las correas y el cerramiento.
- 03Embalado y enviado con el paquete de acero – un solo programa de entrega a obra.
Aplicaciones
Dónde se utiliza Steel encasement systems
- Columns in offices and public buildings
- Beams below fire-rated ceilings
- Steel in escape routes
Datos técnicos
Steel encasement systems – propiedades técnicas
Typical properties and standards
| Propiedad | Unidad | Valor |
|---|---|---|
| Fire test | — | EN 13381-4 · BS 476-21 · UL 263 / ASTM E119 · AS 1530.4 |
| Design basis | — | Boxed section factor (Hp/A or W/D) |
| Components | — | Boards, noggins, angles, screws, staples, joint compound |
Valores publicados por el fabricante para este mercado. Consulte siempre la ficha técnica vigente y las homologaciones requeridas para su proyecto antes de hacer el pedido.
Steel encasement boards
Productos relacionados
Board encasementCalcium silicate fire protection boardVer producto →Board encasementVermiculite fire protection boardVer producto →Boards · cement-basedCement-based fire protection boardsVer producto →← Boards for encasing structural steelFire Protection Boards →
FAQ
Preguntas frecuentes
Why does the section factor change with boards?
Board encasement heats the steel through the box perimeter, so the boxed section factor is used – usually lower than the profile value, needing less protection.
Is this product certified?
Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.
Un solo socio para estructura y envolvente
Envíenos sus planos o su listado de cantidades – cotizamos juntos el acero, el aislamiento, las placas y los cielorrasos y los enviamos en un solo paquete.