제품 이미지: 제조사(공식).

Boards · encasement systems

Steel encasement systems

Box encasement turns a steel member into a clean, square, fire-protected element – the details are as important as the board.

Board + fixings + joints
System: Columns, beams, bracing
Members: Per tested system
Rating

견적 요청

World Steel이 철골 건축물과 함께 또는 단독으로 공급 – 하나의 주문, 하나의 선적, 하나의 파트너.

개요

Steel encasement systems 소개

A box encasement is built from fire boards fixed to noggins, steel angles or directly to each other around the section; the tested system defines board thickness, fixing spacing and joint treatment.

Boxed protection is sized using the boxed section factor (heated perimeter of the box) under EN 13381-4, BS 476-21 or ASTM E119 data.

Penetrations and connections to walls and slabs need tested details or firestop products.

주요 장점

Clean, square architectural finish
Dry, low-mess installation
Long ratings achievable
Inspectable thickness

World Steel · 건물 외피 허브

철골 건축물에서의 Steel encasement systems 활용 방식

World Steel provides member schedules with boxed section factors and coordinates encasement details with the structure.

Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.

01구조물과 함께 사양 결정 – 두께, 밀도, 면재를 지붕, 벽 및 내화 설계에 맞춥니다.
02철골, 퍼린, 외장재와 동일한 3D 모델에서 물량을 산출합니다.
03철골 패키지와 함께 포장·선적 – 현장까지 하나의 납품 일정.

용도

Steel encasement systems의 사용처

Columns in offices and public buildings
Beams below fire-rated ceilings
Steel in escape routes

기술 데이터

Steel encasement systems – 기술 특성

Typical properties and standards

특성	단위	값
Fire test	—	EN 13381-4 · BS 476-21 · UL 263 / ASTM E119 · AS 1530.4
Design basis	—	Boxed section factor (Hp/A or W/D)
Components	—	Boards, noggins, angles, screws, staples, joint compound

해당 시장용으로 제조사가 공개한 값입니다. 주문 전 항상 최신 데이터 시트와 프로젝트에 필요한 승인 사항을 확인하세요.

Steel encasement boards

자주 묻는 질문

Why does the section factor change with boards?

Board encasement heats the steel through the box perimeter, so the boxed section factor is used – usually lower than the profile value, needing less protection.

Is this product certified?

Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.

구조와 외피를 위한 하나의 파트너

도면 또는 물량 내역서를 보내주시면 철골, 단열재, 보드, 천장재를 함께 견적하여 하나의 패키지로 선적합니다.

견적 요청 +84 902 881 833