ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
产品图片：制造商（官方）。
Boards · encasement systems
Steel encasement systems
Box encasement turns a steel member into a clean, square, fire-protected element – the details are as important as the board.
- Board + fixings + joints
- System
- Columns, beams, bracing
- Members
- Per tested system
- Rating
由 World Steel 随您的钢结构建筑一并供应或单独供应 – 一份订单、一次发运、一个合作伙伴。
概览
关于Steel encasement systems
A box encasement is built from fire boards fixed to noggins, steel angles or directly to each other around the section; the tested system defines board thickness, fixing spacing and joint treatment.
Boxed protection is sized using the boxed section factor (heated perimeter of the box) under EN 13381-4, BS 476-21 or ASTM E119 data.
Penetrations and connections to walls and slabs need tested details or firestop products.
主要优势
- Clean, square architectural finish
- Dry, low-mess installation
- Long ratings achievable
- Inspectable thickness
World Steel · 建筑围护材料中心
我们如何在钢结构建筑中使用Steel encasement systems
World Steel provides member schedules with boxed section factors and coordinates encasement details with the structure.
Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.
- 01与结构一同选型 – 厚度、密度和饰面与屋面、墙面及防火设计相匹配。
- 02工程量取自与钢构件、檩条和围护板相同的 3D 模型。
- 03与钢结构包一同包装发运 – 一份到场交货计划。
应用
Steel encasement systems的应用场合
- Columns in offices and public buildings
- Beams below fire-rated ceilings
- Steel in escape routes
技术数据
Steel encasement systems – 技术性能
Typical properties and standards
| 性能 | 单位 | 数值 |
|---|---|---|
| Fire test | — | EN 13381-4 · BS 476-21 · UL 263 / ASTM E119 · AS 1530.4 |
| Design basis | — | Boxed section factor (Hp/A or W/D) |
| Components | — | Boards, noggins, angles, screws, staples, joint compound |
数值为制造商针对该市场公布的数据。订货前请务必核对最新数据表及项目所需的认证。
FAQ
常见问题
Why does the section factor change with boards?
Board encasement heats the steel through the box perimeter, so the boxed section factor is used – usually lower than the profile value, needing less protection.
Is this product certified?
Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.