ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
面向the Netherlands的钢结构
Netherlands
EN 1090 EXC3 structural steel for Dutch projects and the port of Rotterdam.
- 适用标准
- 18
- WSC 认证
- EN 1090-1 · EN 1090-2 · ISO 3834-2
面向the Netherlands的钢结构
World Steel fabricates structural steel for the Netherlands to EN 1090-2 (certified up to EXC3), designed to Eurocodes with the Dutch National Annex.
Dutch steel structures are designed to the Eurocodes (NEN-EN 1990, 1991, 1993) with the Dutch National Annex and must meet the building regulations of the Besluit bouwwerken leefomgeving (Bbl). Fabricated structural components are CE-marked under EN 1090-1 and executed to EN 1090-2 in the execution class set by the designer.
World Steel is certified to EN 1090-2 up to EXC3 and to EN ISO 3834-2, with welders and procedures qualified to EN ISO 9606-1 and EN ISO 15614-1, materials supplied with EN 10204 3.1 certificates and corrosion protection to EN ISO 12944 or EN ISO 1461.
Vietnam and the EU trade under the EVFTA; Rotterdam, Europe's largest port, is the natural gateway for steel packages to the Netherlands and the wider European market.
the Netherlands项目的要求
- CE marking of structural components under EN 1090-1 – confirm execution class and CE route at tender.
- Corrosivity category per EN ISO 12944 (often C3–C5 near the coast and ports).
the Netherlands的项目
No references for the Netherlands are published in this portfolio yet. World Steel supplies the Netherlands from Vietnam – ask us for recent work, references and a quotation for your project.
Ask about the Netherlandsthe Netherlands的钢结构标准
Codes and standards World Steel works to for projects in the Netherlands – what we are certified for, what we design and fabricate to, and the market requirements to confirm at tender.
全部Europe标准 →- WSC certified World Steel holds a certificate for this standard
- Applied by WSC World Steel designs, fabricates or supplies to this standard
- National regulation Statutory framework the project must comply with
Building regulations
| Bbl | Besluit bouwwerken leefomgeving – Dutch building regulations under the Environment and Planning Act | National regulation |
|---|---|---|
| EU CPR | EU Construction Products Regulation – CE marking of construction products | National regulation |
Structural design
| EN 1990 | Eurocode – Basis of structural design | Applied by WSC |
|---|---|---|
| EN 1993 | Eurocode 3 – Design of steel structures (incl. EN 1993-1-3 cold-formed members) | Applied by WSC |
Loads & actions
| EN 1991 | Eurocode 1 – Actions on structures | Applied by WSC |
|---|
Fabrication & erection
| EN 1090-2 | Execution of steel structures – Technical requirements for steel structuresCertified up to EXC3 – BSI Notified Body 2797, FPC certificate 2797 CPR 827443 | WSC certified → |
|---|
Welding & quality
| ISO 3834-2 | Quality requirements for fusion welding of metallic materials – Comprehensive quality requirementsBureau Veritas Vietnam certificate INY-CER/23/1056 | WSC certified → |
|---|---|---|
| ISO 9606-1 | Qualification testing of welders – Fusion welding – Steels | Applied by WSC |
| ISO 15614-1 | Specification and qualification of welding procedures – Arc welding of steels | Applied by WSC |
| ISO 5817 | Fusion-welded joints in steel – Quality levels for imperfections | Applied by WSC |
Steel materials
| EN 10025-2 | Hot rolled structural steels – Non-alloy structural steels (S235, S275, S355) | Applied by WSC |
|---|---|---|
| EN 10219 | Cold formed welded structural hollow sections | Applied by WSC |
| EN 10346 | Continuously hot-dip coated steel flat products for cold forming | Applied by WSC |
| EN 10204 | Metallic products – Types of inspection documentsType 3.1 mill certificates supplied with the material | Applied by WSC |
Bolting
| EN 14399 | High-strength structural bolting assemblies for preloading | Applied by WSC |
|---|
Corrosion protection
| ISO 12944 | Corrosion protection of steel structures by protective paint systems (C1–CX) | Applied by WSC |
|---|---|---|
| ISO 1461 | Hot dip galvanized coatings on fabricated iron and steel articles | Applied by WSC |
Certification & compliance
| EN 1090-1 | Execution of steel structures – Conformity assessment of structural componentsCE marking – FPC certificate 2797 CPR 827443 (BSI, Notified Body 2797), up to EXC3 | WSC certified → |
|---|
Standards are listed for orientation. The governing codes, editions and execution / construction categories are those of the project specification – please send us yours with the enquiry.
我们为the Netherlands供应的材料
Steel grades, coated products and corrosion protection typically supplied to projects in the Netherlands, with mill certificates and full traceability.
Hot-rolled sections & plates
EN 10025-2 S235 / S275 / S355 J0 / J2
Hollow sections
EN 10219 / EN 10210 S355J2H
Cold-formed members & panels
EN 10346 S350GD / S450GD + Z275
Bolting
EN 14399 HV 10.9 · EN 15048
Inspection documents
EN 10204 3.1
Corrosion protection
EN ISO 12944 paint systems · EN ISO 1461 galvanizing