Construyendo confianza, asegurando el éxito Portal de clientes
dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success
Fire-rated access panels – illustration

Imágenes de productos: el fabricante (oficiales).

Fire-rated doors · access panels

Fire-rated access panels

Small doors for big risks: every access opening in a fire-rated wall, ceiling or shaft needs its own tested closure.

Steel frame and door
Body
Walls, ceilings, shafts
Use
Per tested panel
Rating

Solicitar cotización

Suministrado por World Steel con su edificio de acero o por separado – un pedido, un envío, un socio.

Resumen

Acerca de Fire-rated access panels

Access panels give maintenance access to valves, dampers, cables and plumbing behind fire-rated linings and inside shafts.

They are tested in the wall or ceiling type they will be installed in (for example EN 1634-1 or EN 1364-2, UL 10B / ASTM E119 assemblies, AS 1530.4) and must be latched and closed in normal use.

Sizes, lining type and orientation (wall or ceiling) are part of the tested scope.

Ventajas principales

  • Maintains the fire separation
  • Tested for wall or ceiling use
  • Lockable and self-latching versions
  • Matches board, panel and masonry walls

World Steel · centro de envolvente del edificio

Cómo utilizamos Fire-rated access panels en edificios de acero

World Steel supplies access panels with the fire-rated linings, panels and boards of the same package.

Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.

  • 01Especificado junto con la estructura – espesor, densidad y revestimiento adaptados al diseño de cubierta, fachada y protección contra incendios.
  • 02Cantidades obtenidas del mismo modelo 3D que el acero, las correas y el cerramiento.
  • 03Embalado y enviado con el paquete de acero – un solo programa de entrega a obra.

Aplicaciones

Dónde se utiliza Fire-rated access panels

  • Service shafts and risers
  • Fire-rated ceilings
  • Plant and electrical rooms

Datos técnicos

Fire-rated access panels – propiedades técnicas

Typical properties and standards

PropiedadUnidadValor
Fire test—EN 1634-1 / EN 1364-2 · UL 10B / ASTM E119 · AS 1530.4
Classification—EN 13501-2 – EI
Mounting—Wall or ceiling, per tested lining type

Valores publicados por el fabricante para este mercado. Consulte siempre la ficha técnica vigente y las homologaciones requeridas para su proyecto antes de hacer el pedido.

Fire doors & glazing

Productos relacionados

Fire-rated steel doorsets – illustrationFire-rated doors · steelFire-rated steel doorsetsVer producto →Fire-rated glass doors – illustrationFire-rated doors · glazedFire-rated glass doorsVer producto →Fire-rated glazed partitions – illustrationFire-rated glazing · partitionsFire-rated glazed partitionsVer producto →

← Fire-rated doors and glazingFire-Rated Building Systems – Panels, Doors, Glazing, Shutters and Curtains →

FAQ

Preguntas frecuentes

Can a standard access panel be used in a fire-rated wall?

No – it must be a fire-rated panel tested in that wall or ceiling type.

Is this product certified?

Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.

Un solo socio para estructura y envolvente

Envíenos sus planos o su listado de cantidades – cotizamos juntos el acero, el aislamiento, las placas y los cielorrasos y los enviamos en un solo paquete.

Solicitar cotización +84 902 881 833