ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
Imágenes de productos: el fabricante (oficiales).
Fire-rated doors · steel
Fire-rated steel doorsets
A fire door is a tested assembly: leaf, frame, hinges, lock, closer, seals and glazing all count. World Steel supplies complete doorsets, not loose parts.
- Steel, insulated core
- Leaf
- Compartments, exits, plant rooms
- Use
- Per tested doorset
- Rating
Suministrado por World Steel con su edificio de acero o por separado – un pedido, un envío, un socio.
Resumen
Acerca de Fire-rated steel doorsets
Fire doors are tested to EN 1634-1 (classified EI under EN 13501-2), UL 10C / NFPA 252 in North America or AS 1530.4 with AS 1905.1 in Australia; the rating applies only to the tested combination of leaf, frame and hardware.
Self-closing devices, latching, intumescent and smoke seals and vision panels are part of the classification; installation follows NFPA 80 or the manufacturer’s tested details.
World Steel’s steel door range covers hollow metal doors and frames; fire-rated versions are supplied as complete, labelled doorsets.
Ventajas principales
- Tested as a complete assembly
- Hardware, seals and closers matched
- Labelled for inspection where required
- Single and double leaves, vision panels
World Steel · centro de envolvente del edificio
Cómo utilizamos Fire-rated steel doorsets en edificios de acero
World Steel supplies fire doorsets with the building package – frames detailed for the wall type and the steel framing around the opening.
Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.
- 01Especificado junto con la estructura – espesor, densidad y revestimiento adaptados al diseño de cubierta, fachada y protección contra incendios.
- 02Cantidades obtenidas del mismo modelo 3D que el acero, las correas y el cerramiento.
- 03Embalado y enviado con el paquete de acero – un solo programa de entrega a obra.
Aplicaciones
Dónde se utiliza Fire-rated steel doorsets
- Fire compartment walls
- Escape stairs and corridors
- Electrical and plant rooms
Datos técnicos
Fire-rated steel doorsets – propiedades técnicas
Typical properties and standards
| Propiedad | Unidad | Valor |
|---|---|---|
| Fire test | — | EN 1634-1 · UL 10C / NFPA 252 · AS 1530.4 |
| Classification | — | EN 13501-2 (E, EI1, EI2, S200 / Sa smoke) · labels per listing |
| Installation | — | NFPA 80 · AS 1905.1 · manufacturer’s tested details |
| Hardware | — | Closers EN 1154, hinges EN 1935, locks and exit devices tested with the door |
Valores publicados por el fabricante para este mercado. Consulte siempre la ficha técnica vigente y las homologaciones requeridas para su proyecto antes de hacer el pedido.
Fire doors & glazing
Productos relacionados
Fire-rated doors · glazedFire-rated glass doorsVer producto →
Fire-rated glazing · partitionsFire-rated glazed partitionsVer producto →
Fire-rated doors · access panelsFire-rated access panelsVer producto →← Fire-rated doors and glazingFire-Rated Building Systems – Panels, Doors, Glazing, Shutters and Curtains →
FAQ
Preguntas frecuentes
Can we change the hardware on a fire door?
Only with hardware covered by the door’s test evidence or listing – otherwise the rating is lost.
Is this product certified?
Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.
Un solo socio para estructura y envolvente
Envíenos sus planos o su listado de cantidades – cotizamos juntos el acero, el aislamiento, las placas y los cielorrasos y los enviamos en un solo paquete.