信頼を築き、成功を確かなものに クライアントポータル
dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success
Fire-rated steel doorsets – illustration

製品画像：メーカー（公式）。

Fire-rated doors · steel

Fire-rated steel doorsets

A fire door is a tested assembly: leaf, frame, hinges, lock, closer, seals and glazing all count. World Steel supplies complete doorsets, not loose parts.

Steel, insulated core
Leaf
Compartments, exits, plant rooms
Use
Per tested doorset
Rating

見積もりを依頼

World Steel が鉄骨建築と一括で、または単体で供給 – 一つの注文、一つの出荷、一つのパートナー。

概要

Fire-rated steel doorsetsについて

Fire doors are tested to EN 1634-1 (classified EI under EN 13501-2), UL 10C / NFPA 252 in North America or AS 1530.4 with AS 1905.1 in Australia; the rating applies only to the tested combination of leaf, frame and hardware.

Self-closing devices, latching, intumescent and smoke seals and vision panels are part of the classification; installation follows NFPA 80 or the manufacturer’s tested details.

World Steel’s steel door range covers hollow metal doors and frames; fire-rated versions are supplied as complete, labelled doorsets.

主なメリット

  • Tested as a complete assembly
  • Hardware, seals and closers matched
  • Labelled for inspection where required
  • Single and double leaves, vision panels

World Steel · 外装材ハブ

鉄骨建築におけるFire-rated steel doorsetsの活用

World Steel supplies fire doorsets with the building package – frames detailed for the wall type and the steel framing around the opening.

Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.

  • 01構造と一体で仕様決定 – 厚さ、密度、表面材を屋根・外壁・耐火設計に合わせます。
  • 02数量は鉄骨、母屋、外装材と同じ 3D モデルから算出。
  • 03鉄骨パッケージとともに梱包・出荷 – 現場への納入スケジュールは一つです。

用途

Fire-rated steel doorsetsの用途

  • Fire compartment walls
  • Escape stairs and corridors
  • Electrical and plant rooms

技術データ

Fire-rated steel doorsets – 技術特性

Typical properties and standards

特性単位値
Fire test—EN 1634-1 · UL 10C / NFPA 252 · AS 1530.4
Classification—EN 13501-2 (E, EI1, EI2, S200 / Sa smoke) · labels per listing
Installation—NFPA 80 · AS 1905.1 · manufacturer’s tested details
Hardware—Closers EN 1154, hinges EN 1935, locks and exit devices tested with the door

この市場向けにメーカーが公表している値です。ご注文前に必ず最新のデータシートと、プロジェクトに必要な認定をご確認ください。

Fire doors & glazing

関連製品

Fire-rated glass doors – illustrationFire-rated doors · glazedFire-rated glass doors製品を見る →Fire-rated glazed partitions – illustrationFire-rated glazing · partitionsFire-rated glazed partitions製品を見る →Fire-rated access panels – illustrationFire-rated doors · access panelsFire-rated access panels製品を見る →

← Fire-rated doors and glazingFire-Rated Building Systems – Panels, Doors, Glazing, Shutters and Curtains →

FAQ

よくある質問

Can we change the hardware on a fire door?

Only with hardware covered by the door’s test evidence or listing – otherwise the rating is lost.

Is this product certified?

Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.

構造と外装を一つのパートナーで

図面または数量明細書をお送りください – 鉄骨、断熱材、ボード、天井材をまとめて見積り、一つのパッケージで出荷します。

見積もりを依頼 +84 902 881 833