VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
WS-MH-100
WS modular guardrail – top-mounted
Bolt-together top-mounted steel guardrail with top rail, knee rail and toe board – galvanized, no site welding, to OSHA, AS 1657 and EN ISO 14122-3.
詳細と表 →
Product line · WS modular handrail
Modular handrail, built like structural steel
Bolt-together steel guardrails and handrails for platforms, walkways, stairs and roofs – standard stanchions, rails and fabricated fittings, made and hot-dip galvanized in the World Steel plant. Supplied with your structural steel package or ordered on its own.
- 0
- Site welds bolt-together assembly
- 3 groups
- Systems · fittings · accessories one modular range
- US · AU · EU
- Code heights OSHA · AS 1657 · EN ISO 14122-3
- 100 %
- Made by World Steel fabricated and galvanized in our plant
A handrail system from a structural steel fabricator
Every platform, walkway, stair and roof we fabricate needs edge protection – and on most projects the handrail is where site time, hot work and galvanizing repairs pile up. WS modular handrail solves that with a standard kit: stanchions, rails and fittings that bolt together with spanners and hex keys, designed to the heights and loads of the US, Australian and European codes.
All components are fabricated in the same certified plant as our structural steel – cut, welded on jigs, galvanized as single pieces and marked by code – so the handrail arrives with the same quality records as the frame it protects. It can be detailed in the same Tekla model and shipped with your structural steel, or ordered on its own for existing plants and buildings.
Product catalogue
Systems, fittings and accessories
One range, three groups. Every product has its own page with configurations, specifications, standards by market and ordering data.
Handrail systems
Complete guardrail and handrail runs for platforms, walkways, stairs and roofs.
WS-MH-200
Side-mounted modular handrail
Fascia-mounted modular steel handrail bolted to the side of beams, channels or slab edges – keeps walkway width clear; galvanized, no site welding.
詳細と表 →
WS-MH-300
Modular stair handrail
Raking modular handrail for steel stairs and ramps with adjustable stair fittings – continuous with the landing guardrail; galvanized, bolt-together.
詳細と表 →
WS-MH-400
Free-standing roof-edge guardrail
Non-penetrating counterweighted steel guardrail for flat roofs – protects plant access without drilling the roof; modular, galvanized, AS 1657 / EN ISO 14122-3.
詳細と表 →
WS-MH-500
Tube clamp handrail system
Tube clamp handrail kits – galvanised slip-on fittings with grub screws on 33.7–48.3 mm tube, no welding. Loads checked to AS, US and EU codes.
詳細と表 →
WS-MH-600
Modular commercial balustrade
Modular steel picket balustrade panels bolted to posts for balconies, mezzanines, stairs, car parks – to NCC, IBC and EN 1991-1-1, galvanised or powder-coated.
詳細と表 →
WS-MH-700
Bikeway & pedestrian barrier
Modular steel barrier for shared paths, cycleways and footbridges – rub rail, mesh or picket infill, galvanised, to Austroads, AS 5100 and export specs.
詳細と表 →
WS-MH-800
Accessible handrail for ramps & stairs
Continuous accessible handrails for ramps and stairs – AS 1428.1, ADA and EN 17210 heights, diameters and clearances, in stainless or galvanised steel.
詳細と表 →Stanchions, connectors & fixings
The components every run is assembled from – order them with a system or as spares and extensions.
WS-MH-S
Modular stanchions
Steel stanchions for the WS modular handrail – top-mounted, side-mounted, socket and raked posts with 2 or 3 rail fittings, galvanized.
詳細と表 →
WS-MH-C
Rail connectors & joints
Fabricated steel fittings that join WS modular handrail rails – splices, 90° corners, tees, crosses and adjustable knuckles; galvanized, set-screw locked.
詳細と表 →
WS-MH-E
End fittings & wall brackets
End caps, returns, wall flanges and wall-mounted handrail brackets for the WS modular handrail – finishing every run safely; galvanized steel.
詳細と表 →
WS-MH-F
Fixing kits & clamps
Anchor kits, bolt sets and no-drill beam clamps for fixing WS modular handrail stanchions to concrete, steel beams and grating – galvanized.
詳細と表 →Gates, toe boards & accessories
Openings, edge protection and infill that complete a compliant guardrail.
WS-MH-G
Self-closing safety gates
Spring-hinged self-closing gates for ladder and hatch openings in WS modular guardrails – swing inward, close automatically; galvanized or safety yellow.
詳細と表 →
WS-MH-T
Toe boards & brackets
Galvanized steel toe boards 100 and 150 mm with clamp-on brackets for WS modular guardrails – stop tools and parts falling from platforms.
詳細と表 →
WS-MH-R
Removable handrail sections
Lift-out WS modular handrail sections in sockets with locking pins – for loading edges, equipment removal and maintenance access; galvanized.
詳細と表 →
WS-MH-P
Mesh infill panels
Welded mesh infill panels clamped into WS modular guardrails – keep tools, parts and people from passing through; galvanized or powder-coated.
詳細と表 →Inside the system
Four parts, every edge covered
Each run is assembled from the same standard components – that is what makes the system fast, adjustable and easy to extend.
WS-MH-S
Stanchions
Top-mounted, side-mounted, socket, raked and free-standing posts with fittings factory-set at the code heights.
WS-MH-C
Rails & connectors
Galvanized 42.4 mm rails joined by splices, corners, tees and adjustable knuckles – locked with set screws.
WS-MH-G · T
Gates & toe boards
Self-closing gates at ladders and hatches, toe boards and brackets along every deck edge.
WS-MH-F
Fixings
Anchor kits for concrete, bolt sets for steel and beam clamps that need no drilling of existing members.
Advantages
Why modular
01
No site welding
Bolt-together assembly – no hot-work permits, no fire watch, no galvanizing repair on site.
02
Fast to install
Pre-cut rails and factory-set fittings: a crew installs a run with hand tools.
03
Adjustable
Fittings take up corners, slopes and site tolerances that welded rails cannot.
04
Fully galvanized
Every part is galvanized as a single piece – inside and out, with no welded joints left bare.
05
Easy to extend
Add bays, gates or removable sections later with the same standard parts.
06
Code-ready
Heights, rails and toe boards set for OSHA, AS 1657 or EN ISO 14122-3.
規格とコンプライアンス
Codes by market
Fitting heights, rails and toe boards are set for the code of the destination. Key requirements:
United States
- OSHA 29 CFR 1910.29Guardrails, stair rails and handrails
- ASCE 7 · IBCGuard loads in buildings
- ASTM A123Hot-dip galvanizing
- Top rail
- 42 in ± 3 in, 200 lbf
- Toe board
- ≥ 3.5 in where required
Australia & New Zealand
- AS 1657-2018Platforms, walkways, stairways and ladders
- AS/NZS 1170.1Barrier loads
- AS/NZS 5131 WSC認証取得Fabrication – World Steel certified CC3
- Guardrail
- 900–1100 mm
- Toe board
- ≥ 100 mm where required
Europe
- EN ISO 14122-3Stairs, stepladders and guard-rails
- EN 1991-1-1Imposed loads on barriers
- EN 1090-2 WSC認証取得Execution – World Steel certified EXC3
- Guard-rail
- ≥ 1100 mm, gaps ≤ 500 mm
- Toe-plate
- ≥ 100 mm
United Kingdom
- BS EN ISO 14122-3Guard-rails on plant and machinery
- BS 6180Barriers in and about buildings
- Approved Document KProtection from falling – guarding
- Guarding (non-dwellings)
- 900 mm on flights, 1100 mm elsewhere
- Toe-plate
- ≥ 100 mm on plant (BS EN ISO 14122-3)
参考用の概要です――プロジェクト仕様書、採用される基準の版、所轄官庁の判断が優先されます。
Quality documents
Delivered with every handrail package
The same records as the structural steel it protects.
Layout & shop drawings
for approval
Runs, levels, openings and the component schedule by code.
Mill certificates
EN 10204 3.1
Tube, bar and plate traced to the components.
Galvanizing report
coating thickness
Certificate and measured zinc thickness.
Packing list
by area and code
Every bag and bundle marked for site.
Supply options
With your structural steel – or on its own
In the structural steel package. Handrail runs are modelled with the platforms, stairs and mezzanines they protect; stanchion holes and sockets are made in the shop, components are packed with the steel of the same area and arrive in the same containers – one supplier, one programme, one quality dossier.
Ordered separately. For existing plants, roofs and buildings, or to complete steel supplied by others, WS modular handrail is quoted from a layout drawing or site measurements and shipped as a complete kit – or as individual stanchions, fittings and accessories for extensions and spares.
Either way, every component is made by World Steel – nothing is bought in and relabelled.
Quality & durability
Made to last as long as the steel
Components are fabricated under the same ISO 3834-2, AS/NZS 5131 CC3 and EN 1090 EXC3 quality systems as our structural steel: traceable material, qualified welding procedures, jig-built stanchions with repeatable fitting heights, and dimensional inspection before galvanizing.
Hot-dip galvanizing to ASTM A123, AS/NZS 4680 or EN ISO 1461 coats every part inside and out; because the system is bolted, no zinc is burnt off by site welding. For coastal and chemical environments a duplex safety-yellow topcoat extends life and visibility; the coating system is chosen for the corrosivity category of the site.
Fittings are sized so that the joint is never the weak point under the barrier loads of OSHA, AS/NZS 1170.1 or EN 1991-1-1, and stanchion spacing is checked for each project.
プロセス
From layout to installed handrail
- 1
Layout
Drawings, model or site measurements with runs and openings.
- 2
Code & loads
Market code, rail heights and stanchion spacing.
- 3
Detailing
Layout and component schedule for approval.
- 4
Fabrication
Cut, jig-welded and inspected in our plant.
- 5
Galvanizing
Single components, coating checked.
- 6
Packed by area
With the steel package or as a kit.
AS/NZS 5131 CC3
EN 1090 EXC3 · CE
IAS AC472引渡条件 · Incoterms® 2020
ご希望の条件でお届けします
World Steelは工場渡し、本船渡し、または貴社の港・現場渡しで見積ります。輸出梱包、書類、ホーチミン市からの出荷もサービスに含まれます。
Incoterms® 2020を比較 →FAQ
よくある質問
What is a modular handrail?
A handrail or guardrail assembled from standard stanchions, rails and fittings that bolt together, instead of being welded on site. WS modular handrail is fabricated and galvanized as single components and assembled with hand tools.
Can it be supplied with our structural steel?
Yes – most WS modular handrail ships in the same package as the platforms, stairs and mezzanines it protects, detailed in the same model. It can also be ordered on its own for existing structures.
Which codes does it meet?
Fitting heights, rails and toe boards are set for OSHA 1910.29 in the US, AS 1657 in Australia and EN ISO 14122-3 in Europe; stanchion spacing is checked for the barrier loads of the project.
Is anything bought in from other handrail brands?
No. Stanchions, rails, fittings, gates, toe boards and brackets are fabricated in the World Steel plant; anchors are supplied to suit the fixing surface.
Can we order spare parts or extensions later?
Yes. Every component has a WS code, so extensions, gates, removable bays and spares can be ordered individually.
What finish do you recommend?
Hot-dip galvanizing as standard; a duplex safety-yellow topcoat for coastal, chemical or high-visibility areas; powder coat over galvanizing for architectural areas.
関連コンテンツ
鋼製品
Need handrails for your project?
Send the layout or model with the code and finish – we return a component schedule and a delivered price, with your structural steel or as a separate kit.