ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
New Zealand
Featured 
Australia
Australia向け鋼構造
Australia
AS/NZS 5131 CC3-certified structural steel for Australian projects.
- プロジェクト
- 3
- 適用規格
- 16
- WSC 認証
- AS/NZS 5131 · ISO 3834-2
Australia向け鋼構造
World Steel fabricates structural steel and supplies pre-engineered buildings to Australia, certified to AS/NZS 5131 Construction Category CC3.
Australian steel structures are designed to AS 4100 (and AS/NZS 4600 for cold-formed members) with actions to AS/NZS 1170 and earthquake actions to AS 1170.4, under the National Construction Code. Fabrication and erection follow AS/NZS 5131, where the designer assigns a Construction Category from CC1 to CC4; welding follows AS/NZS 1554.1.
World Steel is certified to AS/NZS 5131 CC3 and to ISO 3834-2. Material is supplied to AS/NZS 3679.1, 3678 and 1163 – from ACRS-certified mills where specified – with full traceability, and corrosion protection to AS/NZS 4680 (galvanizing) or AS/NZS 2312.1 (paint).
References published on worldsteelgroup.com include the Byford Child Care centre and steelwork for the Goldfields Arts Centre. Vietnam and Australia trade under AANZFTA, CPTPP and RCEP.
Australiaのプロジェクトに求められる要件
- Construction Category (CC1–CC4) per AS/NZS 5131 is set by the designer – WSC is certified for CC3.
- Material from ACRS-certified mills where the specification calls for it, with full traceability to the mill certificate.
- Inspection and test plan (ITP), weld inspection records and quality dossier per AS/NZS 5131.
Australiaのプロジェクト
3 projects
条件に一致するプロジェクトはありません。
Australiaの鋼構造規格
Codes and standards World Steel works to for projects in Australia – what we are certified for, what we design and fabricate to, and the market requirements to confirm at tender.
Australia & New Zealandの規格一覧 →- WSC certified World Steel holds a certificate for this standard
- Applied by WSC World Steel designs, fabricates or supplies to this standard
- Market requirement Required in this market – project-specific, confirm at tender
- National regulation Statutory framework the project must comply with
Building regulations
| NCC | National Construction Code (incl. Building Code of Australia) | National regulation |
|---|
Structural design
| AS 4100 | Steel structures | Applied by WSC |
|---|---|---|
| AS/NZS 4600 | Cold-formed steel structures | Applied by WSC |
Loads & actions
| AS/NZS 1170 | Structural design actions (general, permanent & imposed, wind, snow & ice) | Applied by WSC |
|---|---|---|
| AS 1170.4 | Structural design actions – Earthquake actions in Australia | Applied by WSC |
Fabrication & erection
| AS/NZS 5131 | Structural steelwork – Fabrication and erectionCertified to Construction Category CC3 – BSI Benchmark certificate BMP 827566 | WSC certified → |
|---|
Welding & quality
| AS/NZS 1554.1 | Structural steel welding – Welding of steel structures | Applied by WSC |
|---|---|---|
| ISO 3834-2 | Quality requirements for fusion welding of metallic materials – Comprehensive quality requirementsBureau Veritas Vietnam certificate INY-CER/23/1056 | WSC certified → |
Steel materials
| AS/NZS 3679.1 | Structural steel – Hot-rolled bars and sections | Applied by WSC |
|---|---|---|
| AS/NZS 3678 | Structural steel – Hot-rolled plates, floorplates and slabs | Applied by WSC |
| AS/NZS 1163 | Cold-formed structural steel hollow sections | Applied by WSC |
| AS 1397 | Continuous hot-dip metallic coated steel sheet and strip | Applied by WSC |
Bolting
| AS/NZS 1252 | High-strength steel fastener assemblies for structural engineering | Applied by WSC |
|---|
Corrosion protection
| AS/NZS 4680 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles | Applied by WSC |
|---|---|---|
| AS/NZS 2312.1 | Protection of structural steel against atmospheric corrosion – Paint coatings | Applied by WSC |
Certification & compliance
| ACRS | Australasian Certification Authority for Reinforcing and Structural Steels – product certificationSteel from ACRS-certified mills when the specification calls for it | Market requirement |
|---|
Standards are listed for orientation. The governing codes, editions and execution / construction categories are those of the project specification – please send us yours with the enquiry.
Australia向けに供給する資材
Steel grades, coated products and corrosion protection typically supplied to projects in Australia, with mill certificates and full traceability.
Hot-rolled sections
AS/NZS 3679.1 Grade 300 / 350
Plate & welded sections
AS/NZS 3678 Grade 250 / 350
Hollow sections
AS/NZS 1163 C350L0 / C450L0
Purlins & girts
AS 1397 G450 Z350 zinc-coated C / Z sections
Roof & wall cladding
AS 1397 G550 AZ150 aluminium-zinc coated, pre-painted options
Bolts
AS/NZS 1252 Property Class 8.8 (snug-tight or tensioned)
Corrosion protection
AS/NZS 4680 galvanizing · AS/NZS 2312.1 paint systems
World Steel がAustraliaで提供するもの
Solutions
Design & EngineeringOur engineers turn architectural drawings into an optimised steel solution, then detail every member for the shop and every step for site.
Fabrication & ManufacturingFrom the largest built-up members to small fittings, every component is cut, welded, blasted, painted and coded in our own plant under certified quality systems.
Export Supply & LogisticsWe supply fabricated steel to projects in 30+ countries, with packing, documentation and trade compliance handled by our export team.
Products
Steel Frame StructuresColumns, beams and bracing for heavy industrial buildings, multi-storey and high-rise frames – fabricated to your drawings and code.
Pre-Engineered Steel Buildings (PEB)Factories, warehouses and halls supplied as a complete system: primary frames, secondary members, cladding and accessories.
Trusses & Long-Span Roof StructuresTruss, space-grid, dome and arch roofs for terminals, halls, stadiums and other large column-free spaces.
Equipment Support Structures, Racks & TowersSteel supports for process equipment, rack systems, platforms and towers for industrial and infrastructure projects.
Secondary Members – Purlins, Girts & StrutsCold-formed C, Z and U purlins and girts, struts and girder beams that carry the cladding and tie the frames together.
対応業界
よくある質問
Is World Steel certified to AS/NZS 5131?
Yes. World Steel is certified to AS/NZS 5131 for Construction Category CC3, which covers most building, industrial and infrastructure structures.
Can you supply ACRS-certified steel?
Yes – where the specification requires it, we procure material from ACRS-certified mills and keep full traceability to the mill certificates.
Which welding standard do you use for Australian projects?
AS/NZS 1554.1, with welding quality management certified to ISO 3834-2.
40,000 t/year製作能力
AS/NZS 5131 CC3認証取得
EN 1090-2 EXC3認証取得
ISO 3834-2認証取得
IAS AC472認証取得
ISO 9001認証取得