ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
New Zealand
Featured 
Australia
الفولاذ الإنشائي لـ Australia
Australia
AS/NZS 5131 CC3-certified structural steel for Australian projects.
- المشاريع
- 3
- المعايير المطبقة
- 16
- اعتمادات WSC
- AS/NZS 5131 · ISO 3834-2
المنشآت الفولاذية لـ Australia
World Steel fabricates structural steel and supplies pre-engineered buildings to Australia, certified to AS/NZS 5131 Construction Category CC3.
Australian steel structures are designed to AS 4100 (and AS/NZS 4600 for cold-formed members) with actions to AS/NZS 1170 and earthquake actions to AS 1170.4, under the National Construction Code. Fabrication and erection follow AS/NZS 5131, where the designer assigns a Construction Category from CC1 to CC4; welding follows AS/NZS 1554.1.
World Steel is certified to AS/NZS 5131 CC3 and to ISO 3834-2. Material is supplied to AS/NZS 3679.1, 3678 and 1163 – from ACRS-certified mills where specified – with full traceability, and corrosion protection to AS/NZS 4680 (galvanizing) or AS/NZS 2312.1 (paint).
References published on worldsteelgroup.com include the Byford Child Care centre and steelwork for the Goldfields Arts Centre. Vietnam and Australia trade under AANZFTA, CPTPP and RCEP.
متطلبات المشاريع في Australia
- Construction Category (CC1–CC4) per AS/NZS 5131 is set by the designer – WSC is certified for CC3.
- Material from ACRS-certified mills where the specification calls for it, with full traceability to the mill certificate.
- Inspection and test plan (ITP), weld inspection records and quality dossier per AS/NZS 5131.
المشاريع في Australia
3 projects
لا توجد مشاريع تطابق عوامل التصفية.
معايير المنشآت الفولاذية لـ Australia
Codes and standards World Steel works to for projects in Australia – what we are certified for, what we design and fabricate to, and the market requirements to confirm at tender.
جميع معايير Australia & New Zealand →- WSC certified World Steel holds a certificate for this standard
- Applied by WSC World Steel designs, fabricates or supplies to this standard
- Market requirement Required in this market – project-specific, confirm at tender
- National regulation Statutory framework the project must comply with
Building regulations
| NCC | National Construction Code (incl. Building Code of Australia) | National regulation |
|---|
Structural design
| AS 4100 | Steel structures | Applied by WSC |
|---|---|---|
| AS/NZS 4600 | Cold-formed steel structures | Applied by WSC |
Loads & actions
| AS/NZS 1170 | Structural design actions (general, permanent & imposed, wind, snow & ice) | Applied by WSC |
|---|---|---|
| AS 1170.4 | Structural design actions – Earthquake actions in Australia | Applied by WSC |
Fabrication & erection
| AS/NZS 5131 | Structural steelwork – Fabrication and erectionCertified to Construction Category CC3 – BSI Benchmark certificate BMP 827566 | WSC certified → |
|---|
Welding & quality
| AS/NZS 1554.1 | Structural steel welding – Welding of steel structures | Applied by WSC |
|---|---|---|
| ISO 3834-2 | Quality requirements for fusion welding of metallic materials – Comprehensive quality requirementsBureau Veritas Vietnam certificate INY-CER/23/1056 | WSC certified → |
Steel materials
| AS/NZS 3679.1 | Structural steel – Hot-rolled bars and sections | Applied by WSC |
|---|---|---|
| AS/NZS 3678 | Structural steel – Hot-rolled plates, floorplates and slabs | Applied by WSC |
| AS/NZS 1163 | Cold-formed structural steel hollow sections | Applied by WSC |
| AS 1397 | Continuous hot-dip metallic coated steel sheet and strip | Applied by WSC |
Bolting
| AS/NZS 1252 | High-strength steel fastener assemblies for structural engineering | Applied by WSC |
|---|
Corrosion protection
| AS/NZS 4680 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles | Applied by WSC |
|---|---|---|
| AS/NZS 2312.1 | Protection of structural steel against atmospheric corrosion – Paint coatings | Applied by WSC |
Certification & compliance
| ACRS | Australasian Certification Authority for Reinforcing and Structural Steels – product certificationSteel from ACRS-certified mills when the specification calls for it | Market requirement |
|---|
Standards are listed for orientation. The governing codes, editions and execution / construction categories are those of the project specification – please send us yours with the enquiry.
المواد التي نوردها لـ Australia
Steel grades, coated products and corrosion protection typically supplied to projects in Australia, with mill certificates and full traceability.
Hot-rolled sections
AS/NZS 3679.1 Grade 300 / 350
Plate & welded sections
AS/NZS 3678 Grade 250 / 350
Hollow sections
AS/NZS 1163 C350L0 / C450L0
Purlins & girts
AS 1397 G450 Z350 zinc-coated C / Z sections
Roof & wall cladding
AS 1397 G550 AZ150 aluminium-zinc coated, pre-painted options
Bolts
AS/NZS 1252 Property Class 8.8 (snug-tight or tensioned)
Corrosion protection
AS/NZS 4680 galvanizing · AS/NZS 2312.1 paint systems
ما تقدمه World Steel في Australia
Solutions
Design & EngineeringOur engineers turn architectural drawings into an optimised steel solution, then detail every member for the shop and every step for site.
Fabrication & ManufacturingFrom the largest built-up members to small fittings, every component is cut, welded, blasted, painted and coded in our own plant under certified quality systems.
Export Supply & LogisticsWe supply fabricated steel to projects in 30+ countries, with packing, documentation and trade compliance handled by our export team.
Products
Steel Frame StructuresColumns, beams and bracing for heavy industrial buildings, multi-storey and high-rise frames – fabricated to your drawings and code.
Pre-Engineered Steel Buildings (PEB)Factories, warehouses and halls supplied as a complete system: primary frames, secondary members, cladding and accessories.
Trusses & Long-Span Roof StructuresTruss, space-grid, dome and arch roofs for terminals, halls, stadiums and other large column-free spaces.
Equipment Support Structures, Racks & TowersSteel supports for process equipment, rack systems, platforms and towers for industrial and infrastructure projects.
Secondary Members – Purlins, Girts & StrutsCold-formed C, Z and U purlins and girts, struts and girder beams that carry the cladding and tie the frames together.
القطاعات التي نخدمها
الأسئلة المتكررة
Is World Steel certified to AS/NZS 5131?
Yes. World Steel is certified to AS/NZS 5131 for Construction Category CC3, which covers most building, industrial and infrastructure structures.
Can you supply ACRS-certified steel?
Yes – where the specification requires it, we procure material from ACRS-certified mills and keep full traceability to the mill certificates.
Which welding standard do you use for Australian projects?
AS/NZS 1554.1, with welding quality management certified to ISO 3834-2.
40,000 t/yearطاقة التصنيع
AS/NZS 5131 CC3معتمد
EN 1090-2 EXC3معتمد
ISO 3834-2معتمد
IAS AC472معتمد
ISO 9001معتمد