Mining conveyor system with stockpile, inclined conveyor galleries, transfer tower and process plant building

Solution · Mining & mineral processing

Structural steel for mines and processing plants

Conveyor galleries and trestles, transfer towers, screen and crusher structures, process plant buildings, pipe racks, platforms and stairs – engineered for heavy, dynamic loads, fabricated to AS/NZS 5131 CC3 and EN 1090 EXC3 and delivered as modules to remote sites.

Discuss your mining project استكشف الحل

Pit to port
Galleries, towers, plant, port: CC3 · EXC3
Certified fabrication: SP
AS/NZS 1554 structural-purpose welds: Modules
Sized for road, rail and sea

Steel transfer tower and conveyor gallery

Built for loads that never stop moving

Mining structures work harder than buildings. Conveyor galleries carry moving belts, spillage and drive tensions; screen and crusher structures see millions of load cycles; transfer towers take impact and surge; everything sits in dust, water and corrosive air, often in seismic regions and far from the nearest workshop. Fabrication quality – weld category, fit-up, coating and dimensional accuracy – directly decides how long the plant runs without trouble.

World Steel fabricates structural steel for mines, concentrators, bulk-handling terminals and processing plants to the owner's engineering standards. We work with EPCM engineers or deliver design-and-fabricate packages, trial-assemble galleries and towers in our factory, and ship numbered, kitted modules with a full quality dossier to site.

Structures

Structures for the whole process chain

From the run-of-mine pad to the load-out – the same certified fabrication for every structure.

truss spans 20–40 m

Conveyor galleries & trestles

Box-truss galleries with walkways, covers, idler stringers and trestle bents, designed for belt, spillage, wind and alignment.

multi-level

Transfer towers & screen structures

Braced towers with grating floors, chute supports and stiff frames for vibrating screens and feeders – fatigue checked.

with crane runways

Process plant buildings

Concentrator, crusher and workshop buildings with heavy crane runways, mill supports and clad enclosures.

pit to port

Integrated plant systems

Stockpile feeds, galleries, towers and plant buildings delivered as one coordinated package.

التطبيقات

Where our steel works

Iron ore & coal

Galleries, transfer stations and load-out structures.

Copper & gold

Concentrators, crushers and leach plant steel.

Bauxite & nickel

Processing plants and bulk-handling terminals.

Lithium & rare earths

New processing plants and refinery structures.

Ports & terminals

Shiploader approaches, stacker-reclaimer yards, sheds.

Cement & quarries

Crushing, screening and storage structures.

المعايير والامتثال

Mining codes by market

Owners' engineering standards usually add requirements to the national codes – we work to both. Key references:

Australia

AS 4100 / AS/NZS 1170Steel structures and structural actions
AS 4324.1Mobile equipment for continuous handling of bulk materials
AS 1657Fixed platforms, walkways, stairways and ladders
AS/NZS 5131 معتمد لدى WSCFabrication and erection – World Steel certified CC3
AS/NZS 1554.1Welding – SP (structural purpose) category for critical welds

Coatings: AS/NZS 2312 paint systems or AS/NZS 4680 hot-dip galvanizing

جميع معايير Australia & New Zealand →

United States / Canada

AISC 360 / AISC 341Steel design and seismic provisions where required
CEMABelt conveyors for bulk materials – industry practice
30 CFR 56 / 57MSHA safety standards for surface and underground mines
OSHA 1910 Subpart DWalking-working surfaces
AWS D1.1Structural welding code – steel

جميع معايير United States →

Europe

EN 1993-1-9Fatigue of steel structures
EN 620Continuous handling equipment – belt conveyor safety
EN ISO 14122Permanent means of access to machinery
EN 1090-2 معتمد لدى WSCExecution – EXC3 · World Steel CE marking
EN ISO 12944Corrosion protection – C4, C5 and CX environments

جميع معايير Europe →

Latin America

NCh 2369Chile – earthquake-resistant design of industrial structures
NCh 433Chile – earthquake-resistant design of buildings
E.030 / E.090Peru – seismic design and steel structures

Practice: Owner specifications typically reference AISC / ASTM materials and AWS welding

ملخص للاسترشاد فقط – تسري مواصفات المشروع وإصدار المعيار المعتمد والجهة المختصة.

الهندسة

Fatigue and dynamics, fabricated right

Vibrating screens, crushers and conveyor drives load their supports millions of times. Fatigue performance depends on detail category and weld quality, so we fabricate critical welds to the specified category – AS/NZS 1554.1 SP, EN 1090-2 EXC3 with EN ISO 5817 level B, or AWS D1.1 – with full-penetration welds, ground profiles and the NDT the designer specifies.

Galleries are checked for deflection and camber so belts track true, and towers are dimensionally controlled so chutes and equipment fit first time.

Transfer tower with grating floors, bracing and vibrating screen

الهندسة

Modular delivery for remote sites

Site hours in remote mining regions are the most expensive hours of the project. We maximise factory work: galleries are fabricated in transportable modules, trial-assembled and match-marked, protected with galvanizing or C5 paint systems and kitted with all bolts and parts per module.

Modules are sized for containers, flat racks or break-bulk shipping and for the road limits to site – with packing lists and barcodes that make site logistics simple.

المواصفات

What we supply

Conveyors: Galleries, trestles, stringers, head and tail frames, drive and take-up structures, covers and walkways
Towers: Transfer towers, surge-bin and chute supports, screen and crusher support structures
Buildings: Plant buildings, workshops and warehouses with crane runways and cladding
Access: Heavy-duty grating, platforms, stairs, ladders and handrails to AS 1657 / EN ISO 14122 / OSHA
Piping: Pipe racks, tailings and water-pipe supports, cable ladders support steel
Protection: Hot-dip galvanizing, duplex or C5 / CX paint systems for abrasive and corrosive environments

العملية

How we deliver

1
Specification review
Owner standards, codes, weld categories, NDT and coating.
2
Shop detailing
3D model, modularisation and material take-offs.
3
Certified fabrication
CC3 / EXC3 fabrication, SP welds, NDT and dimensional control.
4
Trial assembly
Galleries and towers trial-assembled and match-marked.
5
Protection & kitting
Galvanizing or painting, kitted bolts, barcoded parts.
6
Logistics & site
Export packing, shipping and erection supervision.

ضمان مستقل

Certified for heavy industry

AS/NZS 5131 CC3BSI Group Australia & New Zealand (Benchmark Product Certification)BMP 827566

EN 1090 EXC3 · CEBSI Group The Netherlands B.V. – Notified Body 27972797 CPR 827443

FAQ

الأسئلة المتكررة

Which mining structures does World Steel fabricate?

Conveyor galleries and trestles, transfer towers, screen and crusher structures, process plant buildings with crane runways, pipe racks, platforms, stairs, ladders and handrails – from the mine to the port.

Can you fabricate to the owner's engineering standards?

Yes. Mining owners and EPCM contractors usually add their own specifications on top of national codes – weld categories, NDT, coating systems, marking and documentation. We review and work to these requirements.

Which weld category do you use for mining structures?

Whatever the design requires: AS/NZS 1554.1 SP for critical welds in Australian projects, EN 1090-2 EXC3 with EN ISO 5817 quality levels in Europe, or AWS D1.1 for AISC-based projects – with the specified NDT.

How do you ship to remote sites?

Structures are modularised to the road, rail and shipping limits, trial-assembled, protected, kitted with bolts and parts per module and shipped in containers, on flat racks or as break-bulk – with packing lists and barcodes.

Do you design for seismic regions such as Chile and Peru?

Yes – structures are fabricated to the owner's specification and the applicable seismic codes, such as NCh 2369 for industrial structures in Chile and E.030 in Peru.

Planning a mine or processing plant?

Send us the structural drawings or the scope and specification – we return a fabrication review, modularisation concept and a delivered price.

Discuss your mining project +84 902 881 833

شروط التسليم · Incoterms® 2020

تسليم بالشروط التي تحتاجونها

تقدّم World Steel الأسعار تسليم المصنع، أو تسليم ظهر السفينة، أو تسليم مينائكم أو موقعكم. التعبئة للتصدير والمستندات والشحن من مدينة هو تشي منه جزء من خدمتنا.

قارن جميع قواعد Incoterms® 2020 →

FCAFree Carrier FOBFree On Board CFRCost and Freight CIFCost, Insurance and Freight CPTCarriage Paid To CIPCarriage and Insurance Paid To

متاح أيضاً حسب المشروع أو عند الطلب: EXW · FAS · DAP · DPU · DDP

Structural steel for mines and processing plants

Built for loads that never stop moving