منتجات الفولاذ

Anchor bolts & chemical anchors

Cast-in anchor rods ASTM F1554 and metric anchor bolts M16 – M64, anchor bolt cages with templates, chemical (bonded) anchors, capsules, post-installed rebar and mechanical anchors.

8 منتجات

L, headed and J anchor rods with colour-coded ends

Anchor bolts & anchorsF1554 anchor rodsCast-in anchor rods to ASTM F1554 Grade 36, 55 and 105 – L, J and headed, ½ – 4 in, colour-coded ends, heavy hex nuts and plate washers, plain or galvanized.

L, J, headed and straight metric anchor bolts

Anchor bolts & anchorsMetric anchor boltsCast-in metric anchor bolts M16 – M64, class 4.6, 5.6 or 8.8 (ISO 898-1 / AS 1111) – L, J, headed, straight and hammer-head types, galvanized or plain.

Anchor bolt cage with top template, bottom plate and sleeves

Anchor bolts & anchorsAnchor bolt cagesPre-assembled anchor bolt cages with top templates, bottom rings, sleeves and levelling nuts – set as one unit before the pour so every column fits.

Chemical anchors in a concrete section with injection cartridge

Anchor bolts & anchorsChemical anchorsInjection chemical anchors in epoxy, vinylester, hybrid and polyester mortars with rods M8 – M30+ – ETA / ICC-ES approved, cracked or uncracked concrete.

Capsule anchor set in concrete with a glass capsule beside

Anchor bolts & anchorsCapsule anchorsGlass and foil capsule chemical anchors – pre-measured resin, set by spinning or hammering the anchor rod – for repetitive, high-load fixings in concrete.

Anchor rods and internally threaded sleeves

Anchor bolts & anchorsAnchor rods & sleevesThreaded anchor rods with chisel end in 5.8, 8.8 and A4 stainless, and internally threaded sleeves – matched to the approved chemical mortar.

Starter bars bonded into an existing concrete member

Anchor bolts & anchorsPost-installed rebarRebar bonded into existing concrete with approved mortars – starter bars, slab and wall extensions, lap splices – to EN 1992-1-1 / EAD 330087 or ACI 318.

Wedge, sleeve and screw anchors in a concrete section

Anchor bolts & anchorsMechanical anchorsPost-installed mechanical anchors – wedge, sleeve, undercut and concrete screw anchors – loadable immediately, approved for cracked or uncracked concrete.

Cast-in anchor types – see also the chemical anchors page for post-installed fixings.

مصنوع وفق معايير سوقكم

المعايير والشهادات →

United StatesHow US codes govern structural steel, metal buildings and steel products – IBC, ASCE 7, AISC, AWS, OSHA – and how World Steel complies via IAS AC472.58 معايير →

Australia & New ZealandHow the NCC, NZBC, AS/NZS 5131 and AS 4100 govern steelwork in Australia and NZ, and how World Steel delivers to CC3 with ISO 3834-2 welding.51 معايير →

EuropeCE marking under EN 1090-1, EN 1090-2 execution classes and the Eurocodes explained – and how World Steel supplies EXC3 steelwork with a DoP.56 معايير →

Anchor bolts & chemical anchors

مصنوع وفق معايير سوقكم

هل تخططون لمنشأة فولاذية في الخارج؟