ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
أستراليا / نيوزيلندا
- Load immediately – no cure time
- Wedge, sleeve, undercut, screw anchors
- Cracked concrete versions (ETA / ESR)
- Zinc, HDG or stainless
- Removable screw anchors
- Through-fixing installation
When to use
Mechanical anchors suit fixings that must be loaded at once, temporary works and light to medium loads with generous edge distance. Expansion anchors push against the hole wall, so they need more edge distance and spacing than bonded anchors.
Types
| Type | How it holds | Notes |
|---|---|---|
| Wedge (stud) anchor | Torque pulls a cone into an expansion clip | Common, through-fixing |
| Sleeve anchor | Sleeve expands along its length | Concrete and masonry |
| Undercut anchor | Mechanical interlock with an undercut | Highest mechanical loads |
| Concrete screw | Thread cuts into the concrete | Removable, close edges |
المعايير والمتطلبات حسب السوق
المعايير التي تصمم World Steel هذا المنتج وتصنّعه وتوثّقه وفقها – والمتطلبات الهندسية الرئيسية ومتطلبات الأحمال في كل سوق.
أوروبا
- EN 1992-4Design of fastenings
- EAD 330232Mechanical fasteners for concrete
الولايات المتحدة
- ACI 318-19 Ch. 17Anchoring to concrete
- ACI 355.2Qualification of mechanical anchors
ملخص للاسترشاد فقط – تسري مواصفات المشروع وإصدار المعيار المعتمد والجهة المختصة.
التشطيبات
| التشطيب | المعايير / ملاحظات |
|---|---|
| Zinc | ISO 4042 |
| Stainless | A4 |
