Construyendo confianza, asegurando el éxito Portal de clientes
dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success

Anchor bolts & chemical anchors

Mechanical anchors – wedge, sleeve & screw

Post-installed mechanical anchors – wedge, sleeve, undercut and concrete screw anchors – loadable immediately, approved for cracked or uncracked concrete.

EuropaEstados UnidosAustralia / NZ

Solicitar cotización Especificaciones

Wedge, sleeve and screw anchors in a concrete section
Section through mechanical anchorsExpansion clip, sleeve and cutting thread.
  • Load immediately – no cure time
  • Wedge, sleeve, undercut, screw anchors
  • Cracked concrete versions (ETA / ESR)
  • Zinc, HDG or stainless
  • Removable screw anchors
  • Through-fixing installation

When to use

Mechanical anchors suit fixings that must be loaded at once, temporary works and light to medium loads with generous edge distance. Expansion anchors push against the hole wall, so they need more edge distance and spacing than bonded anchors.

When to use a chemical anchor
Cast-in, chemical or mechanical.

Types

Mechanical anchors
TypeHow it holdsNotes
Wedge (stud) anchorTorque pulls a cone into an expansion clipCommon, through-fixing
Sleeve anchorSleeve expands along its lengthConcrete and masonry
Undercut anchorMechanical interlock with an undercutHighest mechanical loads
Concrete screwThread cuts into the concreteRemovable, close edges

Normas y requisitos por mercado

Códigos con los que World Steel diseña, fabrica y documenta este producto, y los principales requisitos geométricos y de carga en cada mercado.

Europa

  • EN 1992-4Design of fastenings
  • EAD 330232Mechanical fasteners for concrete
Todas las normas de Europe →

Estados Unidos

  • ACI 318-19 Ch. 17Anchoring to concrete
  • ACI 355.2Qualification of mechanical anchors
Todas las normas de United States →

Australia / NZ

  • AS 5216Fastenings in concrete
Todas las normas de Australia & New Zealand →

Resumen solo orientativo: prevalecen la especificación del proyecto, la edición del código adoptada y la autoridad competente.

Acabados

AcabadoNormas / notas
ZincISO 4042
StainlessA4

Contenido relacionado

Productos de acero

Chemical anchors in a concrete section with injection cartridgeAnchor bolts & anchorsChemical anchorsStarter bars bonded into an existing concrete memberAnchor bolts & anchorsPost-installed rebarLGS studs in track with hold-down, anchor and strapLight gauge steelConnections & anchors3D render of a stanchion anchored to concrete and another clamped to a steel beamModular handrailFixing kits

Conocimiento PEB

Anchor bolts with template set in a foundation below a PEB base plateWSC productsAnchor bolts & embedsConcrete footing with cast-in anchor bolts under a PEB column baseComponentsFoundations interface
SolucionesChemical anchors
IndustriasIndustrial

Proyectos de referencia

Próximo proyecto

¿Planea una estructura metálica en el extranjero?

Envíenos sus planos o su modelo IFC – nuestro equipo de presupuestos responde con el alcance de fabricación, el plazo y el precio puesto en destino.

Solicitar cotización +84 902 881 833