信頼を築き、成功を確かなものに クライアントポータル dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success
Fire-rated glass doors – illustration

製品画像:メーカー(公式)。

Fire-rated doors · glazed

Fire-rated glass doors

Glass doors that keep fire and smoke back while keeping the building open and light – the glass type decides how much heat passes through.

Steel profiles
Frame
Fire-resistant glass, E / EW / EI
Glass
Per tested doorset
Rating

見積もりを依頼

World Steel が鉄骨建築と一括で、または単体で供給 – 一つの注文、一つの出荷、一つのパートナー。

概要

Fire-rated glass doorsについて

Fire-resistant glass is classified by what it stops: E (integrity – flames and hot gases), EW (integrity plus limited radiation) or EI (integrity plus insulation – the protected face stays cool). The classification applies to the glass, frame and hardware tested together.

Glazed doors are tested to EN 1634-1 and classified under EN 13501-2; in North America fire-protective and fire-resistive glazing and doors follow UL 10C, UL 9 and ASTM E119 depending on the use.

Fire-resistant glass must also meet safety-glazing requirements for impact where people can collide with it.

主なメリット

  • Daylight and visibility in fire compartments
  • E, EW or EI classes to suit the code
  • Steel frames matched to the wall
  • Single, double and sidelight assemblies

World Steel · 外装材ハブ

鉄骨建築におけるFire-rated glass doorsの活用

World Steel coordinates glazed doorsets with the steel framing of the opening and the adjacent fire-rated walls.

Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.

  • 01構造と一体で仕様決定 – 厚さ、密度、表面材を屋根・外壁・耐火設計に合わせます。
  • 02数量は鉄骨、母屋、外装材と同じ 3D モデルから算出。
  • 03鉄骨パッケージとともに梱包・出荷 – 現場への納入スケジュールは一つです。

用途

Fire-rated glass doorsの用途

  • Lobbies and stair enclosures
  • Office and corridor fire separations
  • Shopping-centre and public building fronts

技術データ

Fire-rated glass doors – 技術特性

Typical properties and standards

特性単位値
Fire test—EN 1634-1 · UL 10C · ASTM E119 (fire-resistive glazing) · AS 1530.4
Classification—EN 13501-2 – E, EW, EI
Safety glazing—EN 12600 · ANSI Z97.1 / CPSC 16 CFR 1201 · AS 1288
Installation—Per the tested system – frame fixings and glazing seals

この市場向けにメーカーが公表している値です。ご注文前に必ず最新のデータシートと、プロジェクトに必要な認定をご確認ください。

FAQ

よくある質問

What is the difference between E, EW and EI glass?

E stops flames and hot gases, EW also limits heat radiation, EI also insulates so the unexposed side stays cool – which one is needed depends on the code and the use of the space.

Is this product certified?

Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.

構造と外装を一つのパートナーで

図面または数量明細書をお送りください – 鉄骨、断熱材、ボード、天井材をまとめて見積り、一つのパッケージで出荷します。

見積もりを依頼 +84 902 881 833