Immagini dei prodotti: il produttore (ufficiali).

Fire-rated doors · glazed

Fire-rated glass doors

Glass doors that keep fire and smoke back while keeping the building open and light – the glass type decides how much heat passes through.

Steel profiles
Frame: Fire-resistant glass, E / EW / EI
Glass: Per tested doorset
Rating

Richiedi un preventivo

Fornito da World Steel con il vostro edificio in acciaio o separatamente – un ordine, una spedizione, un partner.

Panoramica

Informazioni su Fire-rated glass doors

Fire-resistant glass is classified by what it stops: E (integrity – flames and hot gases), EW (integrity plus limited radiation) or EI (integrity plus insulation – the protected face stays cool). The classification applies to the glass, frame and hardware tested together.

Glazed doors are tested to EN 1634-1 and classified under EN 13501-2; in North America fire-protective and fire-resistive glazing and doors follow UL 10C, UL 9 and ASTM E119 depending on the use.

Fire-resistant glass must also meet safety-glazing requirements for impact where people can collide with it.

Vantaggi principali

Daylight and visibility in fire compartments
E, EW or EI classes to suit the code
Steel frames matched to the wall
Single, double and sidelight assemblies

World Steel · hub per l'involucro edilizio

Come utilizziamo Fire-rated glass doors negli edifici in acciaio

World Steel coordinates glazed doorsets with the steel framing of the opening and the adjacent fire-rated walls.

Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.

01Specificato insieme alla struttura – spessore, densità e rivestimento adeguati al progetto di copertura, pareti e antincendio.
02Quantità ricavate dallo stesso modello 3D di acciaio, arcarecci e rivestimenti.
03Imballato e spedito con il pacchetto acciaio – un unico programma di consegna in cantiere.

Applicazioni

Dove si usa Fire-rated glass doors

Lobbies and stair enclosures
Office and corridor fire separations
Shopping-centre and public building fronts

Dati tecnici

Fire-rated glass doors – proprietà tecniche

Typical properties and standards

Proprietà	Unità	Valore
Fire test	—	EN 1634-1 · UL 10C · ASTM E119 (fire-resistive glazing) · AS 1530.4
Classification	—	EN 13501-2 – E, EW, EI
Safety glazing	—	EN 12600 · ANSI Z97.1 / CPSC 16 CFR 1201 · AS 1288
Installation	—	Per the tested system – frame fixings and glazing seals

Valori pubblicati dal produttore per questo mercato. Prima dell'ordine verificate sempre la scheda tecnica aggiornata e le approvazioni richieste per il vostro progetto.

Fire doors & glazing

Prodotti correlati

Fire-rated steel doorsets – illustration

Fire-rated doors · steelFire-rated steel doorsetsVedi prodotto →

Fire-rated glazed partitions – illustration

Fire-rated glazing · partitionsFire-rated glazed partitionsVedi prodotto →

Fire-rated doors · access panelsFire-rated access panelsVedi prodotto →

← Fire-rated doors and glazing Fire-Rated Building Systems – Panels, Doors, Glazing, Shutters and Curtains →

FAQ

Domande frequenti

What is the difference between E, EW and EI glass?

E stops flames and hot gases, EW also limits heat radiation, EI also insulates so the unexposed side stays cool – which one is needed depends on the code and the use of the space.

Is this product certified?

Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.

Un unico partner per struttura e involucro

Inviateci i disegni o il computo metrico – quotiamo insieme acciaio, isolamento, lastre e controsoffitti e li spediamo in un unico pacchetto.

Richiedi un preventivo +84 902 881 833