신뢰 구축, 성공 보장 고객 포털 dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success
Fire-rated glass doors – illustration

제품 이미지: 제조사(공식).

Fire-rated doors · glazed

Fire-rated glass doors

Glass doors that keep fire and smoke back while keeping the building open and light – the glass type decides how much heat passes through.

Steel profiles
Frame
Fire-resistant glass, E / EW / EI
Glass
Per tested doorset
Rating

견적 요청

World Steel이 철골 건축물과 함께 또는 단독으로 공급 – 하나의 주문, 하나의 선적, 하나의 파트너.

개요

Fire-rated glass doors 소개

Fire-resistant glass is classified by what it stops: E (integrity – flames and hot gases), EW (integrity plus limited radiation) or EI (integrity plus insulation – the protected face stays cool). The classification applies to the glass, frame and hardware tested together.

Glazed doors are tested to EN 1634-1 and classified under EN 13501-2; in North America fire-protective and fire-resistive glazing and doors follow UL 10C, UL 9 and ASTM E119 depending on the use.

Fire-resistant glass must also meet safety-glazing requirements for impact where people can collide with it.

주요 장점

  • Daylight and visibility in fire compartments
  • E, EW or EI classes to suit the code
  • Steel frames matched to the wall
  • Single, double and sidelight assemblies

World Steel · 건물 외피 허브

철골 건축물에서의 Fire-rated glass doors 활용 방식

World Steel coordinates glazed doorsets with the steel framing of the opening and the adjacent fire-rated walls.

Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.

  • 01구조물과 함께 사양 결정 – 두께, 밀도, 면재를 지붕, 벽 및 내화 설계에 맞춥니다.
  • 02철골, 퍼린, 외장재와 동일한 3D 모델에서 물량을 산출합니다.
  • 03철골 패키지와 함께 포장·선적 – 현장까지 하나의 납품 일정.

용도

Fire-rated glass doors의 사용처

  • Lobbies and stair enclosures
  • Office and corridor fire separations
  • Shopping-centre and public building fronts

기술 데이터

Fire-rated glass doors – 기술 특성

Typical properties and standards

특성단위값
Fire test—EN 1634-1 · UL 10C · ASTM E119 (fire-resistive glazing) · AS 1530.4
Classification—EN 13501-2 – E, EW, EI
Safety glazing—EN 12600 · ANSI Z97.1 / CPSC 16 CFR 1201 · AS 1288
Installation—Per the tested system – frame fixings and glazing seals

해당 시장용으로 제조사가 공개한 값입니다. 주문 전 항상 최신 데이터 시트와 프로젝트에 필요한 승인 사항을 확인하세요.

FAQ

자주 묻는 질문

What is the difference between E, EW and EI glass?

E stops flames and hot gases, EW also limits heat radiation, EI also insulates so the unexposed side stays cool – which one is needed depends on the code and the use of the space.

Is this product certified?

Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.

구조와 외피를 위한 하나의 파트너

도면 또는 물량 내역서를 보내주시면 철골, 단열재, 보드, 천장재를 함께 견적하여 하나의 패키지로 선적합니다.

견적 요청 +84 902 881 833