Fire-rated steel doorsets – illustration

제품 이미지: 제조사(공식).

Fire-rated doors · steel

Fire-rated steel doorsets

A fire door is a tested assembly: leaf, frame, hinges, lock, closer, seals and glazing all count. World Steel supplies complete doorsets, not loose parts.

Steel, insulated core
Leaf: Compartments, exits, plant rooms
Use: Per tested doorset
Rating

견적 요청

World Steel이 철골 건축물과 함께 또는 단독으로 공급 – 하나의 주문, 하나의 선적, 하나의 파트너.

개요

Fire-rated steel doorsets 소개

Fire doors are tested to EN 1634-1 (classified EI under EN 13501-2), UL 10C / NFPA 252 in North America or AS 1530.4 with AS 1905.1 in Australia; the rating applies only to the tested combination of leaf, frame and hardware.

Self-closing devices, latching, intumescent and smoke seals and vision panels are part of the classification; installation follows NFPA 80 or the manufacturer’s tested details.

World Steel’s steel door range covers hollow metal doors and frames; fire-rated versions are supplied as complete, labelled doorsets.

주요 장점

Tested as a complete assembly
Hardware, seals and closers matched
Labelled for inspection where required
Single and double leaves, vision panels

World Steel · 건물 외피 허브

철골 건축물에서의 Fire-rated steel doorsets 활용 방식

World Steel supplies fire doorsets with the building package – frames detailed for the wall type and the steel framing around the opening.

Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.

01구조물과 함께 사양 결정 – 두께, 밀도, 면재를 지붕, 벽 및 내화 설계에 맞춥니다.
02철골, 퍼린, 외장재와 동일한 3D 모델에서 물량을 산출합니다.
03철골 패키지와 함께 포장·선적 – 현장까지 하나의 납품 일정.

용도

Fire-rated steel doorsets의 사용처

Fire compartment walls
Escape stairs and corridors
Electrical and plant rooms

기술 데이터

Fire-rated steel doorsets – 기술 특성

Typical properties and standards

특성	단위	값
Fire test	—	EN 1634-1 · UL 10C / NFPA 252 · AS 1530.4
Classification	—	EN 13501-2 (E, EI1, EI2, S200 / Sa smoke) · labels per listing
Installation	—	NFPA 80 · AS 1905.1 · manufacturer’s tested details
Hardware	—	Closers EN 1154, hinges EN 1935, locks and exit devices tested with the door

해당 시장용으로 제조사가 공개한 값입니다. 주문 전 항상 최신 데이터 시트와 프로젝트에 필요한 승인 사항을 확인하세요.

Fire doors & glazing

자주 묻는 질문

Can we change the hardware on a fire door?

Only with hardware covered by the door’s test evidence or listing – otherwise the rating is lost.

Is this product certified?

Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.

구조와 외피를 위한 하나의 파트너

도면 또는 물량 내역서를 보내주시면 철골, 단열재, 보드, 천장재를 함께 견적하여 하나의 패키지로 선적합니다.

견적 요청 +84 902 881 833