ENEnglish
VITiếng Việt
ZH中文
KO한국어
JA日本語
FRFrançais
ITItaliano
PTPortuguês
ESEspañol
HEעברית
ARالعربية
Imágenes de productos: el fabricante (oficiales).
Fire-rated panels · walls
Stone wool sandwich wall panels
Two coated steel skins bonded to a stone wool core, fixed to the girts of the steel frame – the external wall and its fire performance arrive as one product.
- Stone (mineral) wool, non-combustible
- Core
- External walls, fire walls
- Use
- Per tested system and thickness
- Rating
Suministrado por World Steel con su edificio de acero o por separado – un pedido, un envío, un socio.
Resumen
Acerca de Stone wool sandwich wall panels
Stone wool cores do not add fuel to a fire; the reaction-to-fire class of the whole panel (for example A2-s1,d0 under EN 13501-1) depends on the facings, adhesive and coating.
Fire resistance (EI) is a property of the tested wall system – panel thickness, core density, joints, fixings and supporting steel – classified under EN 13501-2 from EN 1364-1 tests, or AS 1530.4 / ASTM E119 elsewhere.
Insurer approvals such as FM 4880/4881 or LPS 1181 are panel-specific and are checked when the insurer requires them.
Ventajas principales
- Non-combustible core
- Fire resistance and insulation in one layer
- Fast, dry installation on steel girts
- Good acoustic performance
World Steel · centro de envolvente del edificio
Cómo utilizamos Stone wool sandwich wall panels en edificios de acero
World Steel supplies wall panels with the steel frame: girt spacing, panel spans, flashings and fixings are detailed in the same model so the tested system is reproduced on site.
Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.
- 01Especificado junto con la estructura – espesor, densidad y revestimiento adaptados al diseño de cubierta, fachada y protección contra incendios.
- 02Cantidades obtenidas del mismo modelo 3D que el acero, las correas y el cerramiento.
- 03Embalado y enviado con el paquete de acero – un solo programa de entrega a obra.
Aplicaciones
Dónde se utiliza Stone wool sandwich wall panels
- Industrial and manufacturing buildings
- Logistics and cold-chain facilities
- Fire walls between compartments
Datos técnicos
Stone wool sandwich wall panels – propiedades técnicas
Typical properties and standards
| Propiedad | Unidad | Valor |
|---|---|---|
| Core material | — | Stone wool, fibres orientated for strength |
| Thickness range | mm | Typically 50 – 200, by thermal and fire requirement |
| Reaction to fire | — | EN 13501-1 · ASTM E84 · AS 1530.3 / AS 5113 for façades |
| Fire resistance | — | EN 1364-1 / EN 13501-2 · ASTM E119 · AS 1530.4 – per tested system |
| Insurer approvals | — | FM 4880 / 4881, LPS 1181 – where required |
Valores publicados por el fabricante para este mercado. Consulte siempre la ficha técnica vigente y las homologaciones requeridas para su proyecto antes de hacer el pedido.
Fire-rated panels
Productos relacionados
Fire-rated panels · roofsStone wool sandwich roof panelsVer producto →
Fire-rated panels · interiorsFire-rated partition and ceiling panelsVer producto →
Fire-rated panels · compartment wallsFire compartment wall systemsVer producto →← Fire-rated sandwich panelsFire-Rated Building Systems – Panels, Doors, Glazing, Shutters and Curtains →
FAQ
Preguntas frecuentes
Does a stone wool core make the wall fire-rated?
Not on its own. A non-combustible core is a material property; a fire-resistance rating comes from a tested wall system with its thickness, joints and fixings.
Is this product certified?
Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.
Un solo socio para estructura y envolvente
Envíenos sus planos o su listado de cantidades – cotizamos juntos el acero, el aislamiento, las placas y los cielorrasos y los enviamos en un solo paquete.