نبني الثقة ونضمن النجاح بوابة العملاء
dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success
Stone wool sandwich wall panels – illustration

صور المنتجات: الشركة المصنّعة (رسمية).

Fire-rated panels · walls

Stone wool sandwich wall panels

Two coated steel skins bonded to a stone wool core, fixed to the girts of the steel frame – the external wall and its fire performance arrive as one product.

Stone (mineral) wool, non-combustible
Core
External walls, fire walls
Use
Per tested system and thickness
Rating

اطلب عرض سعر

توردها World Steel مع مبناكم الفولاذي أو بشكل منفصل – طلبية واحدة، شحنة واحدة، شريك واحد.

نظرة عامة

حول Stone wool sandwich wall panels

Stone wool cores do not add fuel to a fire; the reaction-to-fire class of the whole panel (for example A2-s1,d0 under EN 13501-1) depends on the facings, adhesive and coating.

Fire resistance (EI) is a property of the tested wall system – panel thickness, core density, joints, fixings and supporting steel – classified under EN 13501-2 from EN 1364-1 tests, or AS 1530.4 / ASTM E119 elsewhere.

Insurer approvals such as FM 4880/4881 or LPS 1181 are panel-specific and are checked when the insurer requires them.

المزايا الرئيسية

  • Non-combustible core
  • Fire resistance and insulation in one layer
  • Fast, dry installation on steel girts
  • Good acoustic performance

World Steel · مركز غلاف المباني

كيف نستخدم Stone wool sandwich wall panels في المباني الفولاذية

World Steel supplies wall panels with the steel frame: girt spacing, panel spans, flashings and fixings are detailed in the same model so the tested system is reproduced on site.

Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.

  • 01يُحدَّد مع المنشأة – السماكة والكثافة والوجه مطابقة لتصميم السقف والجدران والحماية من الحريق.
  • 02الكميات مأخوذة من النموذج ثلاثي الأبعاد ذاته للفولاذ والمدادات والتكسية.
  • 03يُعبأ ويُشحن مع حزمة الفولاذ – جدول تسليم واحد إلى الموقع.

التطبيقات

أين يُستخدم Stone wool sandwich wall panels

  • Industrial and manufacturing buildings
  • Logistics and cold-chain facilities
  • Fire walls between compartments

البيانات الفنية

Stone wool sandwich wall panels – الخصائص الفنية

Typical properties and standards

الخاصيةالوحدةالقيمة
Core material—Stone wool, fibres orientated for strength
Thickness rangemmTypically 50 – 200, by thermal and fire requirement
Reaction to fire—EN 13501-1 · ASTM E84 · AS 1530.3 / AS 5113 for façades
Fire resistance—EN 1364-1 / EN 13501-2 · ASTM E119 · AS 1530.4 – per tested system
Insurer approvals—FM 4880 / 4881, LPS 1181 – where required

القيم كما نشرتها الشركة المصنّعة لهذا السوق. تحققوا دائماً من صحيفة البيانات الحالية والاعتمادات المطلوبة لمشروعكم قبل الطلب.

Fire-rated panels

منتجات ذات صلة

Stone wool sandwich roof panels – illustrationFire-rated panels · roofsStone wool sandwich roof panelsاعرض المنتج →Fire-rated partition and ceiling panels – illustrationFire-rated panels · interiorsFire-rated partition and ceiling panelsاعرض المنتج →Fire compartment wall systems – illustrationFire-rated panels · compartment wallsFire compartment wall systemsاعرض المنتج →

← Fire-rated sandwich panelsFire-Rated Building Systems – Panels, Doors, Glazing, Shutters and Curtains →

FAQ

الأسئلة المتكررة

Does a stone wool core make the wall fire-rated?

Not on its own. A non-combustible core is a material property; a fire-resistance rating comes from a tested wall system with its thickness, joints and fixings.

Is this product certified?

Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.

شريك واحد للهيكل والغلاف

أرسلوا إلينا مخططاتكم أو جدول الكميات – نسعّر الفولاذ والعزل والألواح والأسقف المعلقة معاً ونشحنها كحزمة واحدة.

اطلب عرض سعر +84 902 881 833