نبني الثقة ونضمن النجاح بوابة العملاء
dang.victor@worldsteelgroup.com +84 902 881 833
World SteelBuilding trust, Assuring success
Fire compartment wall systems – illustration

صور المنتجات: الشركة المصنّعة (رسمية).

Fire-rated panels · compartment walls

Fire compartment wall systems

A fire wall must stay standing and intact while the building on one side burns – the panel, its fixings and the steel that holds it are designed as one system.

Stone wool, higher density
Core
Compartment and boundary walls
Use
Per tested system and code
Rating

اطلب عرض سعر

توردها World Steel مع مبناكم الفولاذي أو بشكل منفصل – طلبية واحدة، شحنة واحدة، شريك واحد.

نظرة عامة

حول Fire compartment wall systems

Compartment walls in steel buildings are often panel systems on their own steel frame, so that the collapse of the burning side does not pull the wall down.

The required rating, the structural fire design of the supporting steel and the treatment of roof junctions are set by the fire engineer and the local code.

Openings in the wall need fire-rated doors, shutters or curtains, and every service penetration needs a tested seal.

المزايا الرئيسية

  • Limits fire spread between compartments
  • Lighter and faster than masonry
  • Tested panel joints and fixings
  • Integrates doors, shutters and seals

World Steel · مركز غلاف المباني

كيف نستخدم Fire compartment wall systems في المباني الفولاذية

World Steel designs and fabricates the supporting steel of the fire wall together with the main structure and coordinates the panel system to the fire engineer’s design.

Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.

  • 01يُحدَّد مع المنشأة – السماكة والكثافة والوجه مطابقة لتصميم السقف والجدران والحماية من الحريق.
  • 02الكميات مأخوذة من النموذج ثلاثي الأبعاد ذاته للفولاذ والمدادات والتكسية.
  • 03يُعبأ ويُشحن مع حزمة الفولاذ – جدول تسليم واحد إلى الموقع.

التطبيقات

أين يُستخدم Fire compartment wall systems

  • Large warehouses and logistics centres
  • Factories with high fire loads
  • Boundary walls close to other buildings

البيانات الفنية

Fire compartment wall systems – الخصائص الفنية

Typical properties and standards

الخاصيةالوحدةالقيمة
Fire resistance—EN 1364-1 / EN 13501-2 (EI, EI-M where impact is required) · ASTM E119 · AS 1530.4
Supporting steel—Designed for the fire scenario per EN 1993-1-2 / AS 4100 / AISC 360 App. 4
Openings—Fire doors, shutters, curtains – tested with the wall type
Penetrations—Firestop systems tested for panel walls

القيم كما نشرتها الشركة المصنّعة لهذا السوق. تحققوا دائماً من صحيفة البيانات الحالية والاعتمادات المطلوبة لمشروعكم قبل الطلب.

Fire-rated panels

منتجات ذات صلة

Stone wool sandwich wall panels – illustrationFire-rated panels · wallsStone wool sandwich wall panelsاعرض المنتج →Stone wool sandwich roof panels – illustrationFire-rated panels · roofsStone wool sandwich roof panelsاعرض المنتج →Fire-rated partition and ceiling panels – illustrationFire-rated panels · interiorsFire-rated partition and ceiling panelsاعرض المنتج →

← Fire-rated sandwich panelsFire-Rated Building Systems – Panels, Doors, Glazing, Shutters and Curtains →

FAQ

الأسئلة المتكررة

Who designs the fire wall?

The fire engineer sets the rating and strategy; World Steel designs the supporting steel and coordinates the tested panel system and openings.

Is this product certified?

Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.

شريك واحد للهيكل والغلاف

أرسلوا إلينا مخططاتكم أو جدول الكميات – نسعّر الفولاذ والعزل والألواح والأسقف المعلقة معاً ونشحنها كحزمة واحدة.

اطلب عرض سعر +84 902 881 833