Fire compartment wall systems – illustration

제품 이미지: 제조사(공식).

Fire-rated panels · compartment walls

Fire compartment wall systems

A fire wall must stay standing and intact while the building on one side burns – the panel, its fixings and the steel that holds it are designed as one system.

Stone wool, higher density
Core: Compartment and boundary walls
Use: Per tested system and code
Rating

견적 요청

World Steel이 철골 건축물과 함께 또는 단독으로 공급 – 하나의 주문, 하나의 선적, 하나의 파트너.

개요

Fire compartment wall systems 소개

Compartment walls in steel buildings are often panel systems on their own steel frame, so that the collapse of the burning side does not pull the wall down.

The required rating, the structural fire design of the supporting steel and the treatment of roof junctions are set by the fire engineer and the local code.

Openings in the wall need fire-rated doors, shutters or curtains, and every service penetration needs a tested seal.

주요 장점

Limits fire spread between compartments
Lighter and faster than masonry
Tested panel joints and fixings
Integrates doors, shutters and seals

World Steel · 건물 외피 허브

철골 건축물에서의 Fire compartment wall systems 활용 방식

World Steel designs and fabricates the supporting steel of the fire wall together with the main structure and coordinates the panel system to the fire engineer’s design.

Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.

01구조물과 함께 사양 결정 – 두께, 밀도, 면재를 지붕, 벽 및 내화 설계에 맞춥니다.
02철골, 퍼린, 외장재와 동일한 3D 모델에서 물량을 산출합니다.
03철골 패키지와 함께 포장·선적 – 현장까지 하나의 납품 일정.

용도

Fire compartment wall systems의 사용처

Large warehouses and logistics centres
Factories with high fire loads
Boundary walls close to other buildings

기술 데이터

Fire compartment wall systems – 기술 특성

Typical properties and standards

특성	단위	값
Fire resistance	—	EN 1364-1 / EN 13501-2 (EI, EI-M where impact is required) · ASTM E119 · AS 1530.4
Supporting steel	—	Designed for the fire scenario per EN 1993-1-2 / AS 4100 / AISC 360 App. 4
Openings	—	Fire doors, shutters, curtains – tested with the wall type
Penetrations	—	Firestop systems tested for panel walls

해당 시장용으로 제조사가 공개한 값입니다. 주문 전 항상 최신 데이터 시트와 프로젝트에 필요한 승인 사항을 확인하세요.

Fire-rated panels

자주 묻는 질문

Who designs the fire wall?

The fire engineer sets the rating and strategy; World Steel designs the supporting steel and coordinates the tested panel system and openings.

Is this product certified?

Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.

구조와 외피를 위한 하나의 파트너

도면 또는 물량 내역서를 보내주시면 철골, 단열재, 보드, 천장재를 함께 견적하여 하나의 패키지로 선적합니다.

견적 요청 +84 902 881 833