Stone wool sandwich wall panels – illustration

製品画像：メーカー（公式）。

Fire-rated panels · walls

Stone wool sandwich wall panels

Two coated steel skins bonded to a stone wool core, fixed to the girts of the steel frame – the external wall and its fire performance arrive as one product.

Stone (mineral) wool, non-combustible
Core: External walls, fire walls
Use: Per tested system and thickness
Rating

見積もりを依頼

World Steel が鉄骨建築と一括で、または単体で供給 – 一つの注文、一つの出荷、一つのパートナー。

概要

Stone wool sandwich wall panelsについて

Stone wool cores do not add fuel to a fire; the reaction-to-fire class of the whole panel (for example A2-s1,d0 under EN 13501-1) depends on the facings, adhesive and coating.

Fire resistance (EI) is a property of the tested wall system – panel thickness, core density, joints, fixings and supporting steel – classified under EN 13501-2 from EN 1364-1 tests, or AS 1530.4 / ASTM E119 elsewhere.

Insurer approvals such as FM 4880/4881 or LPS 1181 are panel-specific and are checked when the insurer requires them.

主なメリット

Non-combustible core
Fire resistance and insulation in one layer
Fast, dry installation on steel girts
Good acoustic performance

World Steel · 外装材ハブ

鉄骨建築におけるStone wool sandwich wall panelsの活用

World Steel supplies wall panels with the steel frame: girt spacing, panel spans, flashings and fixings are detailed in the same model so the tested system is reproduced on site.

Product-specific test reports, classification reports and certificates are supplied for the product selected for each project – this page describes the product type, not a certified product.

01構造と一体で仕様決定 – 厚さ、密度、表面材を屋根・外壁・耐火設計に合わせます。
02数量は鉄骨、母屋、外装材と同じ 3D モデルから算出。
03鉄骨パッケージとともに梱包・出荷 – 現場への納入スケジュールは一つです。

用途

Stone wool sandwich wall panelsの用途

Industrial and manufacturing buildings
Logistics and cold-chain facilities
Fire walls between compartments

技術データ

Stone wool sandwich wall panels – 技術特性

Typical properties and standards

特性	単位	値
Core material	—	Stone wool, fibres orientated for strength
Thickness range	mm	Typically 50 – 200, by thermal and fire requirement
Reaction to fire	—	EN 13501-1 · ASTM E84 · AS 1530.3 / AS 5113 for façades
Fire resistance	—	EN 1364-1 / EN 13501-2 · ASTM E119 · AS 1530.4 – per tested system
Insurer approvals	—	FM 4880 / 4881, LPS 1181 – where required

この市場向けにメーカーが公表している値です。ご注文前に必ず最新のデータシートと、プロジェクトに必要な認定をご確認ください。

Fire-rated panels

よくある質問

Does a stone wool core make the wall fire-rated?

Not on its own. A non-combustible core is a material property; a fire-resistance rating comes from a tested wall system with its thickness, joints and fixings.

Is this product certified?

Certification belongs to a specific manufacturer’s product or tested system. We supply the test report, classification or listing accepted in your market for the product selected – it is confirmed per project, never assumed.

構造と外装を一つのパートナーで

図面または数量明細書をお送りください – 鉄骨、断熱材、ボード、天井材をまとめて見積り、一つのパッケージで出荷します。

見積もりを依頼 +84 902 881 833